2D Paper Printer: Difference between revisions
No edit summary |
(Undo revision 14170 by 41.98.99.63 (Talk)) |
||
| Line 1: | Line 1: | ||
=Printers= | |||
Information about any printer accessible within the Noisebridge network should be listed here. If you're adding a new printer, a good suggestion would be to post user/password information physically onto the printer. | Information about any printer accessible within the Noisebridge network should be listed here. If you're adding a new printer, a good suggestion would be to post user/password information physically onto the printer. | ||
| Line 16: | Line 16: | ||
'''For Mac:''' (OS X 10.4+) [[User:Esqg|Esqg]] 20:32, 5 June 2010 (UTC) | '''For Mac:''' (OS X 10.4+) [[User:Esqg|Esqg]] 20:32, 5 June 2010 (UTC) | ||
*System Preferences | *System Preferences | ||
*Print & | *Print & Fax | ||
**Printing | **Printing | ||
*Use the | *Use the "plus" sign below the list of printers to add a printer. | ||
*New window comes up: | *New window comes up: "Printer Browser." Click "IP" tab, not "Default". | ||
**Under | **Under "Protocol" dropdown, select IPP. | ||
**Enter IP address below it: 172.30.0.6 . Computer will validate it, and should identify it as HP Laserjet 5Si. The default printing (Gimp) works for me, but as mentioned the PCL and Postscript options are available. | **Enter IP address below it: 172.30.0.6 . Computer will validate it, and should identify it as HP Laserjet 5Si. The default printing (Gimp) works for me, but as mentioned the PCL and Postscript options are available. | ||
**Click | **Click "add", close extra window. | ||
*Back in | *Back in "Print&Fax", at "Selected Printer in Print Dialog" pick this printer. Or, when you go to print something, choose 172.30.0.6 as your printer among your options. | ||
Revision as of 00:25, 19 November 2010
Printers
Information about any printer accessible within the Noisebridge network should be listed here. If you're adding a new printer, a good suggestion would be to post user/password information physically onto the printer.
If you need to connect to a printer try searching for printers within your OS's printer config doodad. Currently they should automagically show up, if not see what tossing around the IP address of a printer can do for you.
Brother HL-5140
Currently hooked up to Zebra. Shared via IPP. Select the Brother HL-5140 specific PPD for faster printing. The generic postscript PPD should work fine, but be prepared to wait ~60 seconds per page. Note that SMB sharing is not enabled, you have to use IPP.
HP LaserJet 5Si MX (treechopper)
Speaks the usual JetDirect stuff on port 9000. Supports PCL and Postscript. See the Network page for the current address.
Step-by-step setup
Find your computer's list of printers. Add a new printer. Choose to add it under IPP protocol rather than a direct USB connection. The IP address (as of June 5) is 172.30.0.6 .
For Mac: (OS X 10.4+) Esqg 20:32, 5 June 2010 (UTC)
- System Preferences
- Print & Fax
- Printing
- Use the "plus" sign below the list of printers to add a printer.
- New window comes up: "Printer Browser." Click "IP" tab, not "Default".
- Under "Protocol" dropdown, select IPP.
- Enter IP address below it: 172.30.0.6 . Computer will validate it, and should identify it as HP Laserjet 5Si. The default printing (Gimp) works for me, but as mentioned the PCL and Postscript options are available.
- Click "add", close extra window.
- Back in "Print&Fax", at "Selected Printer in Print Dialog" pick this printer. Or, when you go to print something, choose 172.30.0.6 as your printer among your options.