2D Paper Printer: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
(remove crap add link to cloudprint)
Line 1: Line 1:
Information about any 2D printer accessible within the Noisebridge network should be listed here. If you're adding a new printer, a good suggestion would be to post user/password information physically onto the printer and to email our [https://www.noisebridge.net/mailman/listinfo/rack rack list].
Information about any 2D printer accessible within the Noisebridge network should be listed here. If you're adding a new printer, a good suggestion would be to post user/password information physically onto the printer and to email our [https://www.noisebridge.net/mailman/listinfo/rack rack list].
If you need to connect to a printer try searching for printers within your OS's printer config doodad. Currently they should automagically show up, if not see what tossing around the IP address of a printer can do for you.


= Current printers =
= Current printers =


Currently (May 2013) there is one known-good 2D printer in the space.
Visit https://noisebridge.net/wiki/cloudprint for printing at Noisebridge.


==Brother HL-2070N==
==Brother HL-2070N==
Line 12: Line 10:
* Ubuntu drivers: sudo apt-get install brother-cups-wrapper-laser brother-lpr-drivers-laser
* Ubuntu drivers: sudo apt-get install brother-cups-wrapper-laser brother-lpr-drivers-laser
* Mac and Windows drivers: [http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/monolaserpri/hl2070n_all.html?reg=us&c=us&lang=en&prod=hl2070n_all]
* Mac and Windows drivers: [http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/monolaserpri/hl2070n_all.html?reg=us&c=us&lang=en&prod=hl2070n_all]
Configured using BRAdmin Pro
Printer configuration password is "noisebridge"
Toner ordered 06/17/2013 [[hicksu]]
Toner replaced 06/20/2013 [[hicksu]]
Toner replaced 10/09/2013 [[hicksu]]
= Old printers =
These printers may or may not still be in the space and/or currently operational. Please edit this page if you find out!
==HP LaserJet 5Si MX (treechopper)==
* '''IP: 172.30.0.6'''
Speaks the usual JetDirect stuff on port 9000.  Supports PCL and Postscript.  See the [[Network]] page for the current address.
[http://pony.noisebridge.net/~zemmekkis/Laserjet5SiServiceManual.pdf LaserJet 5Si Service Manual]
===Step-by-step setup===
Find your computer's list of printers.  Add a new printer.  Choose to add it under IPP protocol rather than a direct USB connection.
The IP address (as of June 5) is 172.30.0.6 .
====For Mac (OS X 10.4+)====
[[User:Esqg|Esqg]] 20:32, 5 June 2010 (UTC)
*System Preferences
*Print & Fax
**Printing
*Use the "plus" sign below the list of printers to add a printer.
*New window comes up: "Printer Browser." Click "IP" tab, not "Default".
**Under "Protocol" dropdown, select IPP.
**Enter IP address below it: 172.30.0.6  .  Computer will validate it, and should identify it as HP Laserjet 5Si.  The default printing (Gimp) works for me, but as mentioned the PCL and Postscript options are available.
**Click "add", close extra window.
*Back in "Print&Fax", at "Selected Printer in Print Dialog" pick this printer.  Or, when you go to print something, choose 172.30.0.6 as your printer among your options.
==OKI C5200==
There is a printer here, and that is what it says. It is on the workbench facing the South Wall and apparently lives at 172.030.002.114.
==HP LaserJet 3390==
*192.168.2.215
*Next to Pole 8
*Doubles as a scanner/copier/fax.
==Panasonic Ribbon==
[http://www.inkjetsuperstore.com/panasonic-printer-inkjet-cartridges IJSS panasonic ribbon]
==HP Color LaserJet 2840==
The chip in the imaging drum of this printer tells it not to allow you  to print from it anymore. The chip can be pried off of the imaging drum and replaced with a chip that has been pried off a spent HP toner cartridge.<br>
HACK ME PLEASE
==Brother MFC-J435w==
Johnny was Excellent and donated + set up this printer. Now it makes pictures! and letters!
==Canon Pixma iP4200==
This lives next door to [[Quagga]]. There is a [[nburl]] written on it of [https://help.ubuntu.com/community/HardwareSupportComponentsPrinters/CanonPrinters/CanonPixmaIP4200 how to install it under Ubuntu] (though it should already be installed).


==US Cutter MH-1351 MK2==
==US Cutter MH-1351 MK2==
Vinyl cutter driven by Windows 7. Does not make vinyl records :(  
Vinyl cutter driven by Windows 7. Does not make vinyl records :(  
For Linux use InkCut (Inkscape Plugin) see http://ubuntuforums.org/showthread.php?t=1512795
For Linux use InkCut (Inkscape Plugin) see http://ubuntuforums.org/showthread.php?t=1512795

Revision as of 23:42, 26 September 2015

Information about any 2D printer accessible within the Noisebridge network should be listed here. If you're adding a new printer, a good suggestion would be to post user/password information physically onto the printer and to email our rack list.

Current printers

Visit https://noisebridge.net/wiki/cloudprint for printing at Noisebridge.

Brother HL-2070N

Small laser printer located next to the electronics bench.

  • IP: 172.30.0.56
  • Ubuntu drivers: sudo apt-get install brother-cups-wrapper-laser brother-lpr-drivers-laser
  • Mac and Windows drivers: [1]

US Cutter MH-1351 MK2

Vinyl cutter driven by Windows 7. Does not make vinyl records :( For Linux use InkCut (Inkscape Plugin) see http://ubuntuforums.org/showthread.php?t=1512795

Retrieved from "https://www.noisebridge.net/index.php?title=2D_Paper_Printer&oldid=49489"