Editing 3D Printing
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 1: | Line 1: | ||
{{3dprinting}} | {{3dprinting}} | ||
{{headerbox}} | {{headerbox}} | ||
<font size=5>The 3D printing station is one of Noisebridge's [[Fabrication]] [[Resources]].</font> | <font size=5>The 3D printing station is one of Noisebridge's [[Fabrication]] [[Resources]].</font> | ||
Line 12: | Line 6: | ||
* '''RESOURCES:''' We have a number of 3D printers documented below which are available for use. | * '''RESOURCES:''' We have a number of 3D printers documented below which are available for use. | ||
* '''EVENTS:''' We used to have weekly [[Replicator Wednesday]]. Want to restart it? Volunteer to make them happen again! | * '''EVENTS:''' We used to have weekly [[Replicator Wednesday]]. Want to restart it? Volunteer to make them happen again! | ||
* '''MAINTAINERS:''' 0 | |||
* '''MAINTAINERS:''' | |||
{{boxend}} | {{boxend}} | ||
{{recruiting}} | {{recruiting}} | ||
Line 21: | Line 14: | ||
[[File:Capp_Printer_Room.jpg|800px]] | [[File:Capp_Printer_Room.jpg|800px]] | ||
== Printers | == Working Printers == | ||
* [[Creality Ender 3]] (x1) (left shelving unit, top shelf, right side) | |||
* [[Monoprice Miniprinters|Monoprice MP Select Mini]] | |||
* | |||
* | |||
=== | == Broken Printers == | ||
* [[Creality Ender 3]] (x3) | |||
* [[Creality CR-10]] | |||
* [[Creality CR-10 Mini]] | |||
* | |||
* | |||
* | |||
* [[Geeetech A20M]] | * [[Geeetech A20M]] | ||
* [[Monoprice Maker Select Pro Ultimate]] | * [[Monoprice Maker Select Pro Ultimate]] | ||
= | == Unknown Status == | ||
= Filaments = | = Filaments = | ||
There are many colors of filament spools to use for printing projects. Take note of which plastic type your filament is and choose settings appropriately. Using PLA is strongly recommended in almost all cases. If the filament is brittle, then it has gone bad | There are many colors of filament spools to use for printing projects. Take note of which plastic type your filament is and choose settings appropriately. Using PLA is strongly recommended in almost all cases. If the filament is brittle, then it has gone bad. Sealed plastic bags should be used to preserve the lifespan of filament by keeping moisture, oxygen, and dust away. | ||
= PRINTING GUIDE = | = PRINTING GUIDE = | ||
Line 460: | Line 54: | ||
* If the lines of filament coming out of the nozzle are inconsistent, the nozzle may be partially clogged. Insert a very thin wire into the nozzle to clear it. | * If the lines of filament coming out of the nozzle are inconsistent, the nozzle may be partially clogged. Insert a very thin wire into the nozzle to clear it. | ||
* If you cannot insert filament into the head, or you aren't able to get filament to extrude, it may be clogged or blocked. Disassemble the print head and use a thin tool such as a hex key to clear the blockage from both ends. This might need to be done with the print head hot, so use caution. | * If you cannot insert filament into the head, or you aren't able to get filament to extrude, it may be clogged or blocked. Disassemble the print head and use a thin tool such as a hex key to clear the blockage from both ends. This might need to be done with the print head hot, so use caution. | ||
= 3D PRINTING HACKSTATION DESIGN = | = 3D PRINTING HACKSTATION DESIGN = |