Editing 3D Printing

Jump to: navigation, search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
 
{{3dprinting}}
 
{{3dprinting}}
{{blackbox}}[[File:Capp Printer Room.jpg|300px|right]] You are in the Printshop room of Noisebridge. It is sound insulated a bit from the rest of Noisebridge by its walls and 2 windowed doors, one leading out towards the [[Entrance]] and one leading in to the [[Hackitorium]].
 
 
You see myriad 3D printers and large format 2D printers as well.
 
 
'''EXITS:''' [[Front]], [[Print Shop]], [[2D Paper Printer]], [[Hackitorium]]
 
{{cursorboxend}}
 
 
{{headerbox}}
 
{{headerbox}}
 
<font size=5>The 3D printing station is one of Noisebridge's [[Fabrication]] [[Resources]].</font>
 
<font size=5>The 3D printing station is one of Noisebridge's [[Fabrication]] [[Resources]].</font>
Line 12: Line 6:
 
* '''RESOURCES:''' We have a number of 3D printers documented below which are available for use.
 
* '''RESOURCES:''' We have a number of 3D printers documented below which are available for use.
 
* '''EVENTS:''' We used to have weekly [[Replicator Wednesday]]. Want to restart it? Volunteer to make them happen again!
 
* '''EVENTS:''' We used to have weekly [[Replicator Wednesday]]. Want to restart it? Volunteer to make them happen again!
* '''NOTES:''' When logging problems or maintenance, edit so the date descends!
+
* '''MAINTAINERS:''' 0
* '''MAINTAINERS:''' [[User:Magnet|Magnet]], [[User:rugyoga|rugyoga]]
 
 
{{boxend}}
 
{{boxend}}
 
{{recruiting}}
 
{{recruiting}}
Line 20: Line 13:
  
 
[[File:Capp_Printer_Room.jpg|800px]]
 
[[File:Capp_Printer_Room.jpg|800px]]
 
== Printers ==
 
{| class="wikitable"
 
!colspan="6"| Printers
 
|-
 
! Number
 
! Name
 
! Type
 
! Status
 
|-
 
| [[#P1 Agent Smith| P1]]
 
| Agent Smith
 
| [[#Creality Ender 3]]
 
| Working
 
|-
 
| [[#P2 Neo| P2]]
 
| Neo
 
| [[#Creality Ender 3]]
 
| Working
 
|-
 
| [[#P3 Harold | P3]]
 
| Harold
 
| [[#Creality CR-10S]]
 
| Not Working
 
|-
 
| [[#P4 Trinity | P4]]
 
| Trinity
 
| [[#Creality Ender 3]]
 
| Working
 
|-
 
| [[#P5 Cricket | P5]]
 
| Cricket
 
| [[#Monoprice MP Select Mini]]
 
| Working
 
|-
 
| [[#P6 Peter | P6]]
 
| Peter
 
| [[#Monoprice MP Select Mini]]
 
| Working
 
|-
 
| [[#P7 Demosthenes | P7]]
 
| Demosthenes
 
| [[#Creality CR-10 Mini]]
 
| Working
 
|-
 
| [[#P8 Locke | P8]]
 
| Locke
 
| [[#Creality CR-10]]
 
| Not Working
 
|-
 
| [[#P9 Bertha| P9]]
 
| Bertha
 
| [[#Hypercube]]
 
| Unknown
 
|-
 
| [[#P10 Resin | P10]]
 
| Resin
 
| [[#Anycubic Photon Mono X]]
 
| New
 
|}
 
  
 
== Working Printers ==
 
== Working Printers ==
=== P1 Agent Smith===
+
=== P1 Wiggins===
 
* Number: P1
 
* Number: P1
* Name: Agent Smith
+
* Name: Wiggins
 
* Type: [[#Creality Ender 3]]
 
* Type: [[#Creality Ender 3]]
* Location: Left shelving unit, middle shelf, right side
+
* Location: Left shelving unit, top shelf, right side
* Status: Working
+
* Description
 
*
 
*
 
{| class="wikitable"
 
{| class="wikitable"
Line 95: Line 28:
 
! User  
 
! User  
 
! Description
 
! Description
 +
! Filament
 +
! Nozzle Temp
 +
! Bed Temp
 +
|-
 +
|2022/01/15
 +
| @GiftOfGabe
 +
| Printer has label saying it works well.
 +
|-
 +
|2022/01/22
 +
| @GiftOfGabe
 +
| Saw a print running on it.
 +
| [[#F1]]
 +
|
 +
|
 
|-
 
|-
 
|}
 
|}
  
=== P2 Neo ===
+
=== P2 Bean===
 
* Number: P2
 
* Number: P2
* Name: Neo
+
* Name: Bean
 
* Type: [[#Creality Ender 3]]
 
* Type: [[#Creality Ender 3]]
 
* Location: left shelving unit, bottom shelf, left side
 
* Location: left shelving unit, bottom shelf, left side
* Status: Working
+
* Description
 
{| class="wikitable"
 
{| class="wikitable"
 
!colspan="6"|Log
 
!colspan="6"|Log
Line 110: Line 57:
 
! User  
 
! User  
 
! Description
 
! Description
 +
! Filament
 +
! Nozzle Temp
 +
! Bed Temp
 
|-
 
|-
|2022/08/28
+
|2022/01/15
| @rugyoga
+
| @GiftOfGabe
| Turned on Linear Advance and calibrated PLA (k factor: 0.06).
+
| Leveled Bed
| Printed one of the most accurate calibration cubes I've ever witnessed.
 
 
|-
 
|-
|2022/08/28
+
|2022/01/15
| @rugyoga
+
| @GiftOfGabe
| Upgraded Marlin firmware to 2.0.9.5
+
| Printed spool holder for [[MP Mini| #Monoprice MP Select Mini]]
|-
 
|2022/08/21
 
| @rugyoga
 
| Ran extruder estep calibration. Result: 140.5
 
|-
 
|2022/08/14
 
| @rugyoga
 
| Successfully printed a 20 mm calibration cube.
 
|-
 
|2022/08/14
 
| @rugyoga
 
| Set extruder esteps to 130 per MicroSwiss doc.
 
|-
 
|2022/08/14
 
| @rugyoga
 
| Upgraded motherboard to 32 bit BTT SKR v2. (https://www.amzn.com/B0882QGFZR)
 
|-
 
|2022/08/14
 
| @rugyoga
 
| Replaced worn wiring harness.
 
|-
 
|2022/08/10
 
| @rugyoga
 
| Upgraded Heater to 50W. (https://www.amzn.com/B07SYZ3LGB)
 
|-
 
|2022/08/10
 
| @rugyoga
 
| Upgraded Thermistor to 300c capable EPCOS. (https://www.amzn.com/B08R3J6GJ3)
 
|-
 
|2022/08/10
 
| @rugyoga
 
| Added MicroSwiss DirectDrive extruder. (https://www.amzn.com/B08CGN18KJ)
 
|-
 
|2022/08/10
 
| @rugyoga
 
| Added PEI build plate (https://www.amzn.com/B082PFL8TX)
 
|-
 
|2022/08/10
 
| @rugyoga
 
| Took home to perform upgrades.
 
 
|-
 
|-
 
|2022/01/16
 
|2022/01/16
Line 164: Line 73:
 
| Spool broke while taking it off print bed.  Took it home to glue it.
 
| Spool broke while taking it off print bed.  Took it home to glue it.
 
|-
 
|-
|2022/01/15
+
 
| @GiftOfGabe
 
| Leveled Bed
 
|-
 
 
|}
 
|}
  
=== P5 Cricket ===
+
=== P5 Valentine ===
 
* Number: P5
 
* Number: P5
* Name: Cricket
+
* Name: Valentine
 
* Type: [[#Monoprice MP Select Mini]]
 
* Type: [[#Monoprice MP Select Mini]]
 
* Location: right shelving unit, top shelf, ride side
 
* Location: right shelving unit, top shelf, ride side
* Status: Working
+
* Description
 
{| class="wikitable"
 
{| class="wikitable"
 
!colspan="6"|Log
 
!colspan="6"|Log
Line 182: Line 88:
 
! User
 
! User
 
! Description
 
! Description
 +
! Filament
 +
! Nozzle Temp
 +
! Bed Temp
 +
|-
 +
|2022/01/14
 +
| ?
 +
| Added label saying it works well.
 
|-
 
|-
 
|2022/01/23  
 
|2022/01/23  
 
| @GiftOfGabe
 
| @GiftOfGabe
 
| Added print spool and moved to lower shelf.
 
| Added print spool and moved to lower shelf.
|-
 
|2022/01/14
 
| ?
 
| Added label saying it works well.
 
 
|-
 
|-
 
|}
 
|}
Line 199: Line 108:
 
* Type: [[#Monoprice MP Select Mini]]
 
* Type: [[#Monoprice MP Select Mini]]
 
* Location: On very top of left shelving unit
 
* Location: On very top of left shelving unit
* Status: Working
+
 
 
{| class="wikitable"
 
{| class="wikitable"
 
!colspan="6"|Log
 
!colspan="6"|Log
Line 206: Line 115:
 
! User  
 
! User  
 
! Description
 
! Description
 +
! Filament
 +
! Nozzle Temp
 +
! Bed Temp
 +
|-
 +
|2022/01/15
 +
| @GiftOfGabe
 +
| Attempted Fix, Leveled Bed
 
|-
 
|-
 
|2022/01/16  
 
|2022/01/16  
Line 222: Line 138:
 
| @GiftOfGabe
 
| @GiftOfGabe
 
| Printed hotend fan clamp.  It did not stick to the bed on the thin sides.   
 
| Printed hotend fan clamp.  It did not stick to the bed on the thin sides.   
|-
 
|2022/01/15
 
| @GiftOfGabe
 
| Attempted Fix, Leveled Bed
 
 
|-
 
|-
 
|}
 
|}
Line 233: Line 145:
 
* Number: P7
 
* Number: P7
 
* Name: Demosthenes
 
* Name: Demosthenes
* Type: [[#Creality CR-10 Mini]]
+
* Type: [[#Creality CR-10]]
 
* Location: On very top of left shelving unit
 
* Location: On very top of left shelving unit
* Status: Working
+
* Description: Working
 
{| class="wikitable"
 
{| class="wikitable"
 
!colspan="6"|Log
 
!colspan="6"|Log
Line 242: Line 154:
 
! User
 
! User
 
! Description
 
! Description
 +
! Filament
 +
! Nozzle Temp
 +
! Bed Temp
 +
|-
 +
|2022/01/14
 +
| ?
 +
| Added label saying it works well.
 
|-
 
|-
 
|2022/01/23  
 
|2022/01/23  
Line 247: Line 166:
 
| Leveled bed with paper.
 
| Leveled bed with paper.
 
|-
 
|-
|2022/01/14
 
| ?
 
| Added label saying it works well.
 
|-
 
|}
 
  
=== P10 Anycubic ===
+
|2022/01/23
* Number: P10
+
| @GiftOfGabe
* Name: Anycubic
+
| Printed bench boat on it
* Type: [[#Photon Mono X Resin]]
 
* Location: Upstairs by the mural
 
* Status: New (Leveled and working)
 
{| class="wikitable"
 
!colspan="6"|Log
 
|-
 
! Date
 
! User
 
! Description
 
! Resin
 
! Exposure Time
 
! Curing Time
 
|-
 
| 2022/2/28
 
| Gabriel
 
| RERF: 0.8 minor failures, 1.2-1.6 high detail
 
| Basic White Any^3
 
| 0.8-3s
 
 
|-
 
|-
 
|}
 
|}
  
 
== Broken Printers ==
 
== Broken Printers ==
=== P3 Harold ===
+
=== P3 Crazy Tom ===
 
* Number: P3
 
* Number: P3
* Name: Harold
+
* Name: Crazy Tom
* Type: [[Creality CR-10S]]
+
* Type: [[Creality Ender 3]]
 
* Location: left shelving unit, bottom shelf, right side
 
* Location: left shelving unit, bottom shelf, right side
* Status: hotend heat sink is striped and cannot connect to feeder tube, SD Card reader will not lock in but it can still cards if most the way in.
+
* Description: hotend heat sink is striped and cannot connect to feeder tube, SD Card reader will not lock in but it can still cards if most the way in.
 
{| class="wikitable"
 
{| class="wikitable"
 
!colspan="6"|Log
 
!colspan="6"|Log
Line 290: Line 186:
 
! User
 
! User
 
! Description
 
! Description
 +
! Filament
 +
! Nozzle Temp
 +
! Bed Temp
 +
|-
 
|-
 
|-
 
|2022/01/23  
 
|2022/01/23  
Line 297: Line 197:
  
  
=== P4 Trinity ===
+
=== P5 Hot Soup ===
* Number: P4
+
* Number: P5
* Name: Trinity
+
* Name: Hot Soup
 
* Type: [[Creality Ender 3]]
 
* Type: [[Creality Ender 3]]
* Location: left shelving unit, middle shelf, left side
+
* Location: left shelving unit, top shelf, left side
* Status: Being upgraded
+
* Description: hotend heat sink is striped and cannot connect to feeder tube, SD Card reader will not lock in but it can still cards if most the way in.
 
{| class="wikitable"
 
{| class="wikitable"
 
!colspan="6"|Log
 
!colspan="6"|Log
Line 309: Line 209:
 
! User
 
! User
 
! Description
 
! Description
 +
! Filament
 +
! Nozzle Temp
 +
! Bed Temp
 
|-
 
|-
|2022/8/27
 
| @rugyoga
 
| Replaced its thermistor with 450c capable (https://www.amzn.com/B0888NJ63W)
 
Marlin changes:
 
configuration_adv.h: "#define TEMP_SENSOR_0 66"
 
 
src/module/thermistor/thermistor_66.h:
 
{OV(1022), 23},
 
{OV(1023), 22},
 
{OV(1024), 19}};
 
|-
 
|2022/8/27
 
| @rugyoga
 
| Upgraded its hot end with Creality Spider all metal hotend. (https://www.amzn.com/B09QKT5F2B)
 
|-
 
|2022/8/27
 
| @rugyoga
 
| Upgraded its screen with an SKR TFT35 touch screen. (https://www.amzn.com/B08182XHZZ)
 
|-
 
|2022/8/27
 
| @rugyoga
 
| Upgraded its motherboard with an SKR Mini v2 32 bit motherboard. (https://www.amzn.com/B0882QGFZR)
 
|-
 
|2022/7/26
 
| @rugyoga
 
| Replaced its missing build plate with a PEI sheet on a steel plate. (https://www.amzn.com/B07GSJSDWR)
 
 
|-
 
|-
 
|2022/01/23  
 
|2022/01/23  
Line 341: Line 218:
 
| Moved paper printer and repositioned. Noticed there is no build plate on steel print bed. Didn't test.
 
| Moved paper printer and repositioned. Noticed there is no build plate on steel print bed. Didn't test.
 
|}
 
|}
 +
  
 
=== P8 Locke ===
 
=== P8 Locke ===
Line 347: Line 225:
 
* Type: [[Creality CR-10 Mini3]]?
 
* Type: [[Creality CR-10 Mini3]]?
 
* Location: on desk next to CNC machine
 
* Location: on desk next to CNC machine
* Status: Label says "Undergoing maintenance"
+
* Description: Label says "Undergoing maintenance
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 355: Line 233:
 
! User
 
! User
 
! Description
 
! Description
 +
! Filament
 +
! Nozzle Temp
 +
! Bed Temp
 +
|-
 
|-
 
|-
 
|2022/01/??  
 
|2022/01/??  
Line 362: Line 244:
  
 
== Unknown Status ==
 
== Unknown Status ==
=== P9 Bertha===
+
* [[HyperCube]]? - (right shelving unit, top shelf, left side)
* Number: P9
 
* Name: Bertha
 
* Type: [[Hypercube]]?
 
* Location: right shelving unit, top shelf, left side
 
* Status: Unknown... needs testing...
 
 
 
{| class="wikitable"
 
!colspan="6"|Log
 
|-
 
! Date
 
! User
 
! Description
 
|-
 
|2022/01/23
 
| @GiftOfGabe
 
| Needs research
 
|}
 
 
 
== Lost (Where are these printers?) ==
 
 
* [[Geeetech A20M]]
 
* [[Geeetech A20M]]
 
* [[Monoprice Maker Select Pro Ultimate]]
 
* [[Monoprice Maker Select Pro Ultimate]]
Line 387: Line 250:
 
= Printer Types =
 
= Printer Types =
 
=== Creality Ender 3 ===
 
=== Creality Ender 3 ===
* Resources:
 
  * Setup Tutorial: https://www.youtu.be/dQ0q9zLygTY
 
  * Bed Leveling: https://youtu.be/dQ0q9zLygTY?t=1370
 
  * Slicing in Cura: https://youtu.be/dQ0q9zLygTY?t=1864
 
  * Setup and Maintenance (some general info too): https://www.youtube.com/watch?v=T-Z3GmM20JM
 
 
 
=== Monoprice MP Select Mini ===
 
=== Monoprice MP Select Mini ===
* More Info: [[Monoprice_Miniprinters]]
+
* More Info:
 +
  * Monoprice_Miniprinters
  
 
=== Creality CR-10 ===
 
=== Creality CR-10 ===
  
 
= Filaments =
 
= Filaments =
There are many colors of filament spools to use for printing projects. Take note of which plastic type your filament is and choose settings appropriately.  Using PLA is strongly recommended in almost all cases.  If the filament is brittle, then it has gone bad(just needs to be dried out?).  Sealed plastic bags should be used to preserve the lifespan of filament by keeping moisture, oxygen, and dust away.
+
There are many colors of filament spools to use for printing projects. Take note of which plastic type your filament is and choose settings appropriately.  Using PLA is strongly recommended in almost all cases.  If the filament is brittle, then it has gone bad.  Sealed plastic bags should be used to preserve the lifespan of filament by keeping moisture, oxygen, and dust away.
 
   
 
   
  
Line 408: Line 266:
 
|-
 
|-
 
|Number
 
|Number
|Type
+
|Brand
 
|Color
 
|Color
 +
|Date Obtained
 
|Last Used
 
|Last Used
|Brand
 
|Date Obtained
 
 
| Nozzle Temp
 
| Nozzle Temp
 
| Bed Temp
 
| Bed Temp
 
|- id="F1"
 
|- id="F1"
 
| F1
 
| F1
| PLA 
+
|  
 
| Yellow
 
| Yellow
 +
|
 
| 2022/01/23
 
| 2022/01/23
|
 
 
|
 
|
 
|
 
|
Line 448: Line 305:
 
* If the lines of filament coming out of the nozzle are inconsistent, the nozzle may be partially clogged.  Insert a very thin wire into the nozzle to clear it.
 
* If the lines of filament coming out of the nozzle are inconsistent, the nozzle may be partially clogged.  Insert a very thin wire into the nozzle to clear it.
 
* If you cannot insert filament into the head, or you aren't able to get filament to extrude, it may be clogged or blocked.  Disassemble the print head and use a thin tool such as a hex key to clear the blockage from both ends.  This might need to be done with the print head hot, so use caution.
 
* If you cannot insert filament into the head, or you aren't able to get filament to extrude, it may be clogged or blocked.  Disassemble the print head and use a thin tool such as a hex key to clear the blockage from both ends.  This might need to be done with the print head hot, so use caution.
 
* Resources:
 
  * Print a Benchy Boat:
 
    * http://www.3dbenchy.com/features/
 
    * https://www.thingiverse.com/thing:763622
 
    * https://www.youtube.com/watch?v=t_7EMnQ6Rlc
 
  * https://www.youtube.com/watch?v=t_7EMnQ6Rlc
 
  
 
= 3D PRINTING HACKSTATION DESIGN =
 
= 3D PRINTING HACKSTATION DESIGN =

Please note that all contributions to Noisebridge are considered to be released under the Creative Commons Attribution-NonCommercial-ShareAlike (see Noisebridge:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following CAPTCHA:

Cancel Editing help (opens in new window)