Difference between revisions of "3D Printing"

From Noisebridge
Jump to: navigation, search
(Monoprice Miniprinters)
 
(72 intermediate revisions by 16 users not shown)
Line 1: Line 1:
<div style="font-size:24px;">Noisebridge's 3D printing station is one of our Fabrication [[Resources]].</div>
+
{{3dprinting}}
 +
{{boxstart}}
 +
Noisebridge's 3D printing station is one of our Fabrication [[Resources]].
  
 +
* '''CHANNELS:''' We have a #3dprinting channel on [[Slack]].
 +
* '''RESOURCES:''' We have a number of 3D printers documented below which are available for use.
 +
* '''EVENTS:''' We used to have weekly [[Replicator Wednesday]]. Want to restart it? Volunteer to make them happen again!
 +
* '''MAINTAINERS:''' 0
 +
{{boxend}}
 +
{{recruiting}}
  
 
[[File:3DPrinters100dpi.fw.png|300px|right]]
 
[[File:3DPrinters100dpi.fw.png|300px|right]]
  
== PRINTERS WE HAVE ==
+
[[File:Threedprinter_area.JPG|500px]]
  
 +
= PRINTERS WE HAVE =
  
=== Monoprice Miniprinters ===
+
== Working Printers ==
 +
* [[Monoprice Miniprinters]] (Recommended for beginners with extensive tutorial)
 +
* [[Creality CR-10]]
  
[[File:Unnamed.jpg|400px]]
+
== Broken Printers ==
 +
* [[Creality Ender-3 Pro]]
  
To print your file on the Monoprice Miniprinters, you can do it one of two ways:
+
== Unknown ==
 +
* [[Flashforge Creator Dual Extruder Printer]]
 +
* [[Prusa i3 Mk2 Printer]]
  
1. Use the THREED 3D Printer Terminal.
+
== M3D Micro ==
2. Install the Slic3r software on your own computer.
+
Very slow printer, though also low-fuss. Appears to be working but I haven't yet taken the time to wait for a print to get all the way through. Not good for very large or very fine prints.
  
=== Printing on your own computer ===
+
= Filaments =
* Install [http://slic3r.org/ Slicer].
 
* Download the [https://drive.google.com/file/d/0ByPjSf143rlyNXRLeTFMbWR2NHM/view Monoprice printer configuration file].
 
* Run Slicer and choose File Menu / Load Config.
 
* Load the downloaded config file.
 
* Make your STL file into GCODE with the MONOPRICE settings before putting the GCODE onto an SD card and putting it into the monoprice printer.
 
 
 
=== Printing on the Threed ===
 
 
 
1. Open the Slicer app
 
 
 
[[File:00_slicer.PNG]]
 
 
 
2. In the slicer window, click Add...
 
 
 
[[File:01_slicer_window.PNG]]
 
 
 
3. Choose the file you want to print (there is a test file in /Documents/Slic3r/)
 
 
 
[[File:03_slicer_add_documents_slicer.PNG]]
 
 
 
4. Select the noisebridge logo file or your own.
 
 
 
[[File:04_noisebridge_logo_file.PNG]]
 
 
 
5. The file shows up in the preview window.
 
 
 
[[File:04_slicer_imported.PNG]]
 
 
 
6. Click Export G-code...
 
 
 
[[File:05_export_gcode.PNG]]
 
 
 
7. Place the G-code file on an SD card. (There are 3 cards that may be in the printers already.)
 
 
 
=== FLASHFORGE CREATOR DUAL EXTRUDER PRINTER ===
 
 
 
[[File:FlashForgeCreatorr.jpg|300px]]
 
 
 
bool '''currentlyOperational''' = true;
 
 
 
string '''cloneOf''' = "a MakerBot Replicator Dual Extruder";
 
 
 
==== Flashforge Docs ====
 
* [http://www.flashforge-usa.com/shop/3d-printers/creator-dual-extruder.html this is the wood frame product], similar to the Creator Pro model made of plastic.
 
* [http://www.flashforge-usa.com/assets/manual/flashforge_creator_pro_user_guide_v01.20.2015.3.0.pdf?cd6e8a Flashforge Creator Pro manual]
 
* [http://goo.gl/3mwCkk Getting the Flashforge Creator printing]
 
 
 
=== Printing from your own laptop ===
 
# Software Installation
 
## Download and install [http://www.ftdichip.com/Drivers/VCP.htm FTDI Drivers].
 
## Download and install [http://replicat.org/download ReplicatorG].
 
# Software Configuration
 
## Open ReplicatorG.
 
## Choose the menu '''File > Open...''' and select the STL file you want to print (It will probably be in your downloads folder if you got it from a web site like Thingiverse.).
 
## Choose the menu '''Machine > Machine Type > The Replicator Dual'''.
 
## Choose the menu '''Machine > Connection (Serial port) > /dev/tty.usbmodem1411'''.
 
##
 
# Generate GCode from your STL file.
 
# Click Connect to device. (If you have trouble, see Connection Troubleshooting below.)
 
 
 
* Connection Troubleshooting
 
** Connection error: The serial port named '/dev/tty.usbmodem1411' could not be found.
 
*** It may not be turned on and plugged in.
 
* Printing Troubleshooting
 
** It stops printing midway through.
 
*** Are you browsing the Internet memes with Replicator in the background? It can't print very far in the background. Alt-tab/command-tab to bring ReplicatorG to foreground every time it stops and it will resume. This is one of the main reasons to start using the SD card to print: You can use your computer for other things without slowing down or stopping prints.
 
 
 
=== Printing from an SD card ===
 
# Put files ending in .gcode on an SD card
 
# Insert SD card into the side-facing slot on the front right side of the case.
 
# Press DOWN ARROW till you reach Print from SD card
 
# Press CENTER SELECT
 
 
 
 
 
=== Printing from the [[Threed]] printstation PC ===
 
A [[Threed]] printer computer station is connected to the printer.
 
 
 
=== Filaments ===
 
 
There are many colors of filament spools to use for printing projects. Take note of which plastic type your filament is and choose settings appropriately. The wrong plastic can damage the printer and make your prints look look like drek.
 
There are many colors of filament spools to use for printing projects. Take note of which plastic type your filament is and choose settings appropriately. The wrong plastic can damage the printer and make your prints look look like drek.
  
 
* Note: Replicator defaults are feedrate 40 and 220 degrees C. Setting them to feedrate 80 brings up an accelerated settings warning. The printer is ready to handle 80.
 
* Note: Replicator defaults are feedrate 40 and 220 degrees C. Setting them to feedrate 80 brings up an accelerated settings warning. The printer is ready to handle 80.
  
==== ABS Plastic ====
+
== ABS Plastic ==
 
* Feedrate: 80
 
* Feedrate: 80
 
* Travel feedrate: 80
 
* Travel feedrate: 80
 
* Temperature: 230 degrees C
 
* Temperature: 230 degrees C
 +
* Buildplate 110 degrees C
 
* Print on yellow kapton tape
 
* Print on yellow kapton tape
 
* Smells like cancer
 
* Smells like cancer
  
==== PLA Plastic ====
+
== PLA Plastic ==
 
* Feedrate: 80
 
* Feedrate: 80
 
* Travel feedrate: 100
 
* Travel feedrate: 100
* Temperature: 180 degrees C
+
* Temperature: 180-230 degrees C (depends on brand, check spool, cross fingers)
 
* Print on blue painter's tape
 
* Print on blue painter's tape
 
* Smells like Canadian maple syrup
 
* Smells like Canadian maple syrup
  
=== REPRAP PRUSA PRINTER ===
+
= PRINTING GUIDELINES =
 
 
See: [[RepRap]]
 
 
 
== PRINTING GUIDELINES ==
 
  
 
* Do not leave 3D printer jobs unattended. Leaving print job will result in project being tossed.
 
* Do not leave 3D printer jobs unattended. Leaving print job will result in project being tossed.
  
== 3D PRINTING HACKSTATION DESIGN ==
+
= 3D PRINTING HACKSTATION DESIGN =
 
The 3D printing printing hackstation is a kiosk with the following items necessary for 3D printing:
 
The 3D printing printing hackstation is a kiosk with the following items necessary for 3D printing:
 
* 3D printer
 
* 3D printer
Line 136: Line 69:
 
* Overhead Shelf
 
* Overhead Shelf
 
** Filament spools rack
 
** Filament spools rack
 +
* 3D Printer tools box
 +
** elmers glue
 +
** Kapton tape
 +
** box cutter
 +
** usb cables of various ends (micro, b)
 +
** screw driver
 +
** plastic scraper
 +
** allen keys
 +
 +
[[File:3dprintertools.JPG|200px]]
 +
 +
 +
Wish list:
 +
* sandpaper
 +
* working 3d printers
  
== PROJECT IDEAS ==
+
= PROJECT IDEAS =
  
 
* Design a 3D printing merit badge (3D printed in a merit badge shape with velcro attached to the back).
 
* Design a 3D printing merit badge (3D printed in a merit badge shape with velcro attached to the back).
   
+
 
== Would you like to help organize a new weekly 3D printing workshop? ==
+
 
 +
* Giant 3d-printer
 +
  - canabalizing 2 makerbot replicators
 +
 
 +
= Would you like to help organize a new weekly 3D printing workshop? =
 
If you are interested in organizing a new regular 3D printing meetup or reviving Replicator Wednesdays, do it!
 
If you are interested in organizing a new regular 3D printing meetup or reviving Replicator Wednesdays, do it!
 
* Let [[User:Lxpk]] know and he will assist with updating the wiki and organizing your event or project.
 
* Let [[User:Lxpk]] know and he will assist with updating the wiki and organizing your event or project.
  
== Past 3D Printing Things ==
+
= Past 3D Printing Things =
  
 
*We used to have [[Makerbot]] printers.
 
*We used to have [[Makerbot]] printers.
*We used to have [[Replicator Wednesdays]]. Want to restart it?
+
*We used to have [[Replicator Wednesday]]. Want to restart it?
 
* There is an outdated [[3DPrintBeginners]] guide page that could be a source of good material for this updated new page.
 
* There is an outdated [[3DPrintBeginners]] guide page that could be a source of good material for this updated new page.

Latest revision as of 10:06, 19 June 2020

Guilds | Meta | Electronics | Fab | Games | Music | Library | Neuro | Philosophy | Funding | Art | Crypto | Edit

Fabrication | Sewing | 3D Printing | Dirty Shop | SparkleForge | Laser Cutter | Vinyl Cutter | Edit

3D Printing | Monoprice Miniprinters | Creality CR-10 | Edit

Noisebridge's 3D printing station is one of our Fabrication Resources.

  • CHANNELS: We have a #3dprinting channel on Slack.
  • RESOURCES: We have a number of 3D printers documented below which are available for use.
  • EVENTS: We used to have weekly Replicator Wednesday. Want to restart it? Volunteer to make them happen again!
  • MAINTAINERS: 0
RECRUITING! 2+ maintainer volunteers needed, please volunteer to become a maintainer. Edit
3DPrinters100dpi.fw.png

Threedprinter area.JPG

PRINTERS WE HAVE[edit]

Working Printers[edit]

Broken Printers[edit]

Unknown[edit]

M3D Micro[edit]

Very slow printer, though also low-fuss. Appears to be working but I haven't yet taken the time to wait for a print to get all the way through. Not good for very large or very fine prints.

Filaments[edit]

There are many colors of filament spools to use for printing projects. Take note of which plastic type your filament is and choose settings appropriately. The wrong plastic can damage the printer and make your prints look look like drek.

  • Note: Replicator defaults are feedrate 40 and 220 degrees C. Setting them to feedrate 80 brings up an accelerated settings warning. The printer is ready to handle 80.

ABS Plastic[edit]

  • Feedrate: 80
  • Travel feedrate: 80
  • Temperature: 230 degrees C
  • Buildplate 110 degrees C
  • Print on yellow kapton tape
  • Smells like cancer

PLA Plastic[edit]

  • Feedrate: 80
  • Travel feedrate: 100
  • Temperature: 180-230 degrees C (depends on brand, check spool, cross fingers)
  • Print on blue painter's tape
  • Smells like Canadian maple syrup

PRINTING GUIDELINES[edit]

  • Do not leave 3D printer jobs unattended. Leaving print job will result in project being tossed.

3D PRINTING HACKSTATION DESIGN[edit]

The 3D printing printing hackstation is a kiosk with the following items necessary for 3D printing:

  • 3D printer
  • Pegboard
    • Blue masking tape to coat the build platform.
    • Wedge to scrape builds off of the tape.
      • Autobody chisel works best.
    • Ruler
    • Duster spray can to clean out parts
    • Files to file down parts
    • Scraps box for recycling of wasted parts.
    • Showcase box for showing cool things to inspire people with.
    • Cleaning Reminder Sign: (Please help keep NOISEBRIDGE tidy by keeping this area clean.)
  • Overhead Shelf
    • Filament spools rack
  • 3D Printer tools box
    • elmers glue
    • Kapton tape
    • box cutter
    • usb cables of various ends (micro, b)
    • screw driver
    • plastic scraper
    • allen keys

3dprintertools.JPG


Wish list:

  • sandpaper
  • working 3d printers

PROJECT IDEAS[edit]

  • Design a 3D printing merit badge (3D printed in a merit badge shape with velcro attached to the back).


  • Giant 3d-printer
- canabalizing 2 makerbot replicators

Would you like to help organize a new weekly 3D printing workshop?[edit]

If you are interested in organizing a new regular 3D printing meetup or reviving Replicator Wednesdays, do it!

  • Let User:Lxpk know and he will assist with updating the wiki and organizing your event or project.

Past 3D Printing Things[edit]