A13 tablet: Difference between revisions
Jump to navigation
Jump to search
(→Flashing: add note about livesuit and phoenixsuit) |
|||
Line 15: | Line 15: | ||
* Figure out how to enter FEL mode. | * Figure out how to enter FEL mode. | ||
* No obviously exposed UART/JTAG - might be tied to uSD slot | * No obviously exposed UART/JTAG - might be tied to uSD slot | ||
* ENtering FEL is par tof the boot process (handled by the masked BROM): https://linux-sunxi.org/Boot_Process | |||
* LiveSuit factory flashing software (Linux, OSX, Win) for Allwinner: http://linux-sunxi.org/LiveSuit | * LiveSuit factory flashing software (Linux, OSX, Win) for Allwinner: http://linux-sunxi.org/LiveSuit | ||
* 'PhoenixSuit' (may be Windows only): https://github.com/linux-sunxi/sunxi-livesuite | * 'PhoenixSuit' (may be Windows only): https://github.com/linux-sunxi/sunxi-livesuite |
Revision as of 19:43, 9 November 2015
Allwinner A13 Chinese Tablet
90% of info will come from: https://linux-sunxi.org/Main_Page
Hardware
- Board model: TW_A0910_16B_V1.1_0830 (silkscreened). The id tag is searchable as "TW_A0910"
- Manufacturing: 2013 08 30 (silkscreened)
- touch controller: gslx680 - https://github.com/jabjoe/sunxi-gslx680
- wifi: Realtek RTL8188 - has been in linux kernel forever at this point
- Power management: AXP209 - https://linux-sunxi.org/AXP209
- Flash: Hynix
- RAM: 256X16 DDR3 Generic (4GB)
Flashing
- Figure out how to enter FEL mode.
- No obviously exposed UART/JTAG - might be tied to uSD slot
- ENtering FEL is par tof the boot process (handled by the masked BROM): https://linux-sunxi.org/Boot_Process
- LiveSuit factory flashing software (Linux, OSX, Win) for Allwinner: http://linux-sunxi.org/LiveSuit
- 'PhoenixSuit' (may be Windows only): https://github.com/linux-sunxi/sunxi-livesuite
Bootloader
- A13 is now mainlined on U-boot
Kernel
- TODO
- Reusing older sources: https://linux-sunxi.org/Linux_Kernel [most likely not necessary to reuse, because of Mali400 being pretty opensource now]
Debian bootstrap
- TODO