COR1A: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
(Add UART pinout)
 
Line 14: Line 14:


The device appears to be a 4x core 1Ghz arm64 box with 2GB of RAM.
The device appears to be a 4x core 1Ghz arm64 box with 2GB of RAM.
There is a 3.3 volt UART inside the case on the PCB. There is a 4-pin inline header labeled "J1" near the corner. There is a white silkscreen arrow pointing to pin 1.
{| class="wikitable" style="margin:auto"
|-
! J1 Pin !! Function
|-
| 1 || Unknown
|-
| 2 || TX from the COR1A (115200/8N1)
|-
| 3 || RX into the COR1A
|-
| 4 || Ground
|}


== U-Boot Log ==
== U-Boot Log ==

Latest revision as of 23:56, 18 April 2022

The Mysterious Blob Objects!

Noisebridge has *many* outdoor routers purchased at auction from the aftermath of the liquidation of Common Networks.

These devices are marked COR/Model: COR1A/FCC ID: 2AP38-COR1A Hardware-wise, they seem to be powered by and pass-through POE power. There is a dinky 2.4 Ghz radio for local configuration; otherwise, these are just outdoor routers that mount nicely on a pole with a hose clamp.

Hardware[edit]

It appears to be a https://openwrt.org/toh/hwdata/nxp/nxp_ls1043ardb User manual: https://usermanual.wiki/Common-Networks/COR1A

The device appears to be a 4x core 1Ghz arm64 box with 2GB of RAM.

There is a 3.3 volt UART inside the case on the PCB. There is a 4-pin inline header labeled "J1" near the corner. There is a white silkscreen arrow pointing to pin 1.

J1 Pin Function
1 Unknown
2 TX from the COR1A (115200/8N1)
3 RX into the COR1A
4 Ground

U-Boot Log[edit]

U-Boot 2017.07 (Oct 24 2019 - 20:16:20 +0000)

SoC:  LS1043AE Rev1.1 (0x87920011)
Clock Configuration:
       CPU0(A53):1000 MHz  CPU1(A53):1000 MHz  CPU2(A53):1000 MHz  
       CPU3(A53):1000 MHz  
       Bus:      300  MHz  DDR:      1600 MT/s  FMAN:     500  MHz
Reset Configuration Word (RCW):
       00000000: 0610000a 0a000000 00000000 00000000
       00000010: 45550002 00400002 40044000 c1002000
       00000020: 00000000 00000000 00000000 0003effd
       00000030: 20004504 00263002 00000096 00000001
Model: LS1043A QDS Board
Board: LS1043AQDS, boot from QSPI
I2C:   ready
DRAM:  Initializing DDR....
Detected UDIMM Fixed DDR on board
1.9 GiB (DDR4, 32-bit, CL=11, ECC off)
Using SERDES1 Protocol: 17749 (0x4555)
Waking secondary cores to start from fbd13000
All (4) cores are up.
NAND:  0 MiB
MMC:   FSL_SDHC: 0

SF: Detected mx25u25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
EEPROM: Read failed.
In:    serial
Out:   serial
Err:   serial
Net:   
SF: Detected mx25u25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB
Fman1: Uploading microcode version 108.4.9
PCIe0: pcie@3400000 Root Complex: no link
PCIe1: pcie@3500000 Root Complex: no link
PCIe2: pcie@3600000 Root Complex: no link
FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3 [PRIME], FM1@DTSEC4, FM1@DTSEC5, FM1@DTSEC6
Hit any key to stop autoboot:  3 ### 2 ### 1 ### 0 
Booting from partition: 1 (/dev/mmcblk0p3)

Loading from mmc device 0, partition 2: Name: kernel1  Type: U-Boot
Fit image detected...
   FIT description: arm64 kernel, ramdisk and FDT blob
    Image 0 (kernel)
     Description:  ARM64 Kernel
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x910000d0
     Data Size:    6534285 Bytes = 6.2 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x80080000
     Entry Point:  0x80080000
     Hash algo:    crc32
     Hash value:   d2dd3f5d
    Image 1 (ls1043ardb-dtb)
     Description:  ls1043ardb-dtb
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x9163b644
     Data Size:    29534 Bytes = 28.8 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   ff735566
    Configuration 0 (ls1043ardb)
     Description:  config for ls1043ardb
     Kernel:       kernel
     Init Ramdisk: initrd
     FDT:          ls1043ardb-dtb
## Loading kernel from FIT Image at 91000000 ...
   Using 'ls1043ardb' configuration
   Trying 'kernel' kernel subimage
     Description:  ARM64 Kernel
     Type:         Kernel Image
     Compression:  gzip compressed
     Data Start:   0x910000d0
     Data Size:    6534285 Bytes = 6.2 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x80080000
     Entry Point:  0x80080000
     Hash algo:    crc32
     Hash value:   d2dd3f5d
   Verifying Hash Integrity ... crc32+ OK
## Loading fdt from FIT Image at 91000000 ...
   Using 'ls1043ardb' configuration
   Trying 'ls1043ardb-dtb' fdt subimage
     Description:  ls1043ardb-dtb
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x9163b644
     Data Size:    29534 Bytes = 28.8 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   ff735566
   Verifying Hash Integrity ... crc32+ OK
   Loading fdt from 0x9163b644 to 0x90000000
   Booting using the fdt blob at 0x90000000
   Uncompressing Kernel Image ... OK
   Using Device Tree in place at 0000000090000000, end 000000009001a35d

Starting kernel ...

Linux Boot[edit]

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.16 (builder@fbubuntu) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9)) #1 SMP PREEMPT Wed Mar 25 21:06:57 UTC 2020
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: LS1043A RDB Board
[    0.000000] earlycon: uart8250 at MMIO 0x00000000021c0500 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr
[    0.000000] OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr
[    0.000000] OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd
[    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000fbdfffff]
[    0.000000] NUMA: NODE_DATA [mem 0xfbdc8ec0-0xfbdca67f]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000fbdfffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000f7ffffff]
[    0.000000]   node   0: [mem 0x00000000fb000000-0x00000000fb7fffff]
[    0.000000]   node   0: [mem 0x00000000fbc00000-0x00000000fbdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000fbdfffff]
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 24 pages/cpu @ffff80007bd61000 s59224 r8192 d30888 u98304
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 486152
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs init=/linuxrc earlycon=uart8250,mmio,0x21c0500 root=/dev/mmcblk0p3
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 1911068K/1976320K available (9404K kernel code, 918K rwdata, 3408K rodata, 640K init, 926K bss, 48868K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff0000089b0000   (  9408 KB)
[    0.000000]     .rodata : 0xffff0000089b0000 - 0xffff000008d10000   (  3456 KB)
[    0.000000]       .init : 0xffff000008d10000 - 0xffff000008db0000   (   640 KB)
[    0.000000]       .data : 0xffff000008db0000 - 0xffff000008e95a00   (   919 KB)
[    0.000000]        .bss : 0xffff000008e95a00 - 0xffff000008f7d318   (   927 KB)
[    0.000000]     fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
[    0.000000]               0xffff7e0000000000 - 0xffff7e0001ef8000   (    30 MB actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff80007be00000   (  1982 MB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Adjusting CPU interface base to 0x000000000142f000
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: Enabling global workaround for Freescale erratum a005858
[    0.000000] arch_timer: CPU0: Trapping CNTVCT access
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.000004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.008690] Console: colour dummy device 80x25
[    0.013215] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[    0.023643] pid_max: default: 32768 minimum: 301
[    0.028398] Security Framework initialized
[    0.033319] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.040900] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.048021] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.054783] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.078031] ASID allocator initialised with 65536 entries
[    0.083539] Hierarchical SRCU implementation.
[    0.097567] EFI services will not be available.
[    0.110152] smp: Bringing up secondary CPUs ...
[    0.142849] Detected VIPT I-cache on CPU1
[    0.142888] arch_timer: CPU1: Trapping CNTVCT access
[    0.142895] CPU1: Booted secondary processor [410fd034]
[    0.170887] Detected VIPT I-cache on CPU2
[    0.170907] arch_timer: CPU2: Trapping CNTVCT access
[    0.170912] CPU2: Booted secondary processor [410fd034]
[    0.198941] Detected VIPT I-cache on CPU3
[    0.198961] arch_timer: CPU3: Trapping CNTVCT access
[    0.198966] CPU3: Booted secondary processor [410fd034]
[    0.199022] smp: Brought up 1 node, 4 CPUs
[    0.246040] SMP: Total of 4 processors activated.
[    0.250778] CPU features: detected feature: 32-bit EL0 Support
[    0.256765] CPU: All CPU(s) started at EL2
[    0.260902] alternatives: patching kernel code
[    0.266322] devtmpfs: initialized
[    0.274772] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.284610] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.292023] DMI not present or invalid.
[    0.296114] NET: Registered protocol family 16
[    0.301609] cpuidle: using governor menu
[    0.305981] Bman ver:0a02,02,01
[    0.311023] qman-fqd addr 0x00000000fb800000 size 0x400000
[    0.316576] qman-pfdr addr 0x00000000f8000000 size 0x2000000
[    0.322286] Qman ver:0a01,03,02,00
[    0.325850] vdso: 2 pages (1 code @ ffff0000089b6000, 1 data @ ffff000008db5000)
[    0.333331] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.341081] DMA: preallocated 256 KiB pool for atomic allocations
[    0.347346] Serial: AMBA PL011 UART driver
[    0.351713] pstore: using zlib compression
[    0.356203] console [pstore-1] enabled
[    0.359984] pstore: Registered ramoops as persistent store backend
[    0.366212] ramoops: attached 0x100000@0xfbf00000, ecc: 0/0
[    0.372738] Machine: LS1043A RDB Board
[    0.376517] SoC family: QorIQ LS1043A
[    0.380198] SoC ID: svr:0x87920011, Revision: 1.1
[    0.407169] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.414914] ACPI: Interpreter disabled.
[    0.420164] SCSI subsystem initialized
[    0.424166] usbcore: registered new interface driver usbfs
[    0.429963] usbcore: registered new interface driver hub
[    0.435409] usbcore: registered new device driver usb
[    0.440987] imx-i2c 2180000.i2c: fsl-scl-gpio not found
[    0.446376] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
[    0.454190] i2c i2c-0: IMX I2C adapter registered
[    0.458965] i2c i2c-0: can't use DMA, using PIO instead.
[    0.464538] pps_core: LinuxPPS API ver. 1 registered
[    0.469557] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.478778] PTP clock support registered
[    0.482941] EDAC MC: Ver: 3.0.0
[    0.486319] dmi: Firmware registration failed.
[    0.490837] bman-fbpr addr 0x00000000fa000000 size 0x1000000
[    0.496579] Bman err interrupt handler present
[    0.501711] Bman portal initialised, cpu 0
[    0.505930] Bman portal initialised, cpu 1
[    0.510144] Bman portal initialised, cpu 2
[    0.514361] Bman portal initialised, cpu 3
[    0.518492] Bman portals initialised
[    0.523264] Qman err interrupt handler present
[    0.528009] QMan: Allocated lookup table at ffff00000a725000, entry count 65537
[    0.535951] Qman portal initialised, cpu 0
[    0.540163] Qman portal initialised, cpu 1
[    0.544370] Qman portal initialised, cpu 2
[    0.548577] Qman portal initialised, cpu 3
[    0.552704] Qman portals initialised
[    0.556404] Bman: BPID allocator includes range 32:32
[    0.561579] Qman: FQID allocator includes range 256:256
[    0.566844] Qman: FQID allocator includes range 32768:32768
[    0.572539] Qman: CGRID allocator includes range 0:256
[    0.577917] Qman: pool channel allocator includes range 1025:15
[    0.584019] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree
[    0.590115] fsl-ifc 1530000.ifc: Freescale Integrated Flash Controller
[    0.596709] fsl-ifc 1530000.ifc: IFC version 1.4, 8 banks
[    0.603060] clocksource: Switched to clocksource arch_sys_counter
[    0.609339] VFS: Disk quotas dquot_6.6.0
[    0.613344] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.620389] pnp: PnP ACPI: disabled
[    0.629715] NET: Registered protocol family 2
[    0.634582] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.642027] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.648948] TCP: Hash tables configured (established 16384 bind 16384)
[    0.655621] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.661725] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.668383] NET: Registered protocol family 1
[    0.673085] RPC: Registered named UNIX socket transport module.
[    0.679079] RPC: Registered udp transport module.
[    0.683819] RPC: Registered tcp transport module.
[    0.688557] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.695716] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.706036] audit: initializing netlink subsys (disabled)
[    0.711563] audit: type=2000 audit(0.656:1): state=initialized audit_enabled=0 res=1
[    0.711875] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    0.719853] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.720036] NFS: Registering the id_resolver key type
[    0.720054] Key type id_resolver registered
[    0.720056] Key type id_legacy registered
[    0.720064] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.720167] fuse init (API version 7.26)
[    0.722669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.722755] io scheduler noop registered
[    0.722793] io scheduler cfq registered (default)
[    0.722795] io scheduler mq-deadline registered
[    0.722798] io scheduler kyber registered
[    0.728641] OF: PCI: host bridge /soc/pcie@3400000 ranges:
[    0.728660] OF: PCI:    IO 0x4000010000..0x400001ffff -> 0x00000000
[    0.728668] OF: PCI:   MEM 0x4040000000..0x407fffffff -> 0x40000000
[    0.728828] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0000:00
[    0.728835] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.728840] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.728847] pci_bus 0000:00: root bus resource [mem 0x4040000000-0x407fffffff] (bus address [0x40000000-0x7fffffff])
[    0.729197] pci 0000:00:00.0: BAR 6: assigned [mem 0x4040000000-0x40400007ff pref]
[    0.729204] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.729407] pcieport 0000:00:00.0: Signaling PME with IRQ 64
[    0.729517] pcieport 0000:00:00.0: AER enabled with IRQ 65
[    0.729653] OF: PCI: host bridge /soc/pcie@3500000 ranges:
[    0.729666] OF: PCI:    IO 0x4800010000..0x480001ffff -> 0x00000000
[    0.729675] OF: PCI:   MEM 0x4840000000..0x487fffffff -> 0x40000000
[    0.729797] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0001:00
[    0.729803] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.729810] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
[    0.729816] pci_bus 0001:00: root bus resource [mem 0x4840000000-0x487fffffff] (bus address [0x40000000-0x7fffffff])
[    0.730109] pci 0001:00:00.0: BAR 6: assigned [mem 0x4840000000-0x48400007ff pref]
[    0.730115] pci 0001:00:00.0: PCI bridge to [bus 01]
[    0.730289] pcieport 0001:00:00.0: Signaling PME with IRQ 66
[    0.730391] pcieport 0001:00:00.0: AER enabled with IRQ 67
[    0.730524] OF: PCI: host bridge /soc/pcie@3600000 ranges:
[    0.730537] OF: PCI:    IO 0x5000010000..0x500001ffff -> 0x00000000
[    0.730545] OF: PCI:   MEM 0x5040000000..0x507fffffff -> 0x40000000
[    0.730670] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0002:00
[    0.730676] pci_bus 0002:00: root bus resource [bus 00-ff]
[    0.730682] pci_bus 0002:00: root bus resource [io  0x20000-0x2ffff] (bus address [0x0000-0xffff])
[    0.730688] pci_bus 0002:00: root bus resource [mem 0x5040000000-0x507fffffff] (bus address [0x40000000-0x7fffffff])
[    0.730976] pci 0002:00:00.0: BAR 6: assigned [mem 0x5040000000-0x50400007ff pref]
[    0.730981] pci 0002:00:00.0: PCI bridge to [bus 01]
[    0.731175] pcieport 0002:00:00.0: Signaling PME with IRQ 68
[    0.731282] pcieport 0002:00:00.0: AER enabled with IRQ 69
[    0.737852] Freescale LS2 console driver
[    0.737956] fsl-ls2-console: device fsl_mc_console registered
[    0.738030] fsl-ls2-console: device fsl_aiop_console registered
[    0.741437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.743234] console [ttyS0] disabled
[    1.025122] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 36, base_baud = 18750000) is a 16550A
[    1.033998] console [ttyS0] enabled
[    1.033998] console [ttyS0] enabled
[    1.041003] bootconsole [uart8250] disabled
[    1.041003] bootconsole [uart8250] disabled
[    1.049890] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 36, base_baud = 18750000) is a 16550A
[    1.059115] 21d0500.serial: ttyS2 at MMIO 0x21d0500 (irq = 37, base_baud = 18750000) is a 16550A
[    1.068331] 21d0600.serial: ttyS3 at MMIO 0x21d0600 (irq = 37, base_baud = 18750000) is a 16550A
[    1.085281] brd: module loaded
[    1.093620] loop: module loaded
[    1.154942] nand: No NAND device found
[    1.159050] fsl-quadspi 1550000.quadspi: mx25u25635f (32768 Kbytes)
[    1.167535] libphy: Fixed MDIO Bus: probed
[    1.172446] tun: Universal TUN/TAP device driver, 1.6
[    1.178599] libphy: Freescale XGMAC MDIO Bus: probed
[    1.185544] libphy: Freescale XGMAC MDIO Bus: probed
[    1.192887] libphy: Freescale XGMAC MDIO Bus: probed
[    1.198176] libphy: Freescale XGMAC MDIO Bus: probed
[    1.203465] libphy: Freescale XGMAC MDIO Bus: probed
[    1.208749] libphy: Freescale XGMAC MDIO Bus: probed
[    1.214075] libphy: Freescale XGMAC MDIO Bus: probed
[    1.219377] libphy: Freescale XGMAC MDIO Bus: probed
[    1.224663] libphy: Freescale XGMAC MDIO Bus: probed
[    1.245616] Freescale FM module, FMD API version 21.1.0
[    1.254984] Freescale FM Ports module
[    1.258674] fsl_mac: fsl_mac: FSL FMan MAC API based driver
[    1.264894] fsl_mac 1ae0000.ethernet: FMan MEMAC
[    1.269536] fsl_mac 1ae0000.ethernet: FMan MAC address: 28:3e:76:00:11:dc
[    1.276744] fsl_mac 1ae2000.ethernet: FMan MEMAC
[    1.281382] fsl_mac 1ae2000.ethernet: FMan MAC address: 28:3e:76:00:11:dd
[    1.288345] fsl_mac 1ae4000.ethernet: FMan MEMAC
[    1.292983] fsl_mac 1ae4000.ethernet: FMan MAC address: 28:3e:76:00:11:de
[    1.299949] fsl_mac 1ae6000.ethernet: FMan MEMAC
[    1.304587] fsl_mac 1ae6000.ethernet: FMan MAC address: 28:3e:76:00:11:df
[    1.311800] fsl_mac 1ae8000.ethernet: FMan MEMAC
[    1.316438] fsl_mac 1ae8000.ethernet: FMan MAC address: 28:3e:76:00:11:e0
[    1.323653] fsl_mac 1aea000.ethernet: FMan MEMAC
[    1.328291] fsl_mac 1aea000.ethernet: FMan MAC address: 28:3e:76:00:11:e1
[    1.335169] fsl_dpa: FSL DPAA Ethernet driver
[    1.340899] fsl_dpa soc:fsl,dpaa:ethernet@0: Skip RX PCD High Priority FQs initialization
[    1.354078] fsl_dpa: fsl_dpa: Probed interface eth0
[    1.359966] fsl_dpa soc:fsl,dpaa:ethernet@1: Skip RX PCD High Priority FQs initialization
[    1.373486] fsl_dpa: fsl_dpa: Probed interface eth1
[    1.379571] fsl_dpa soc:fsl,dpaa:ethernet@2: Skip RX PCD High Priority FQs initialization
[    1.393797] fsl_dpa: fsl_dpa: Probed interface eth2
[    1.400102] fsl_dpa soc:fsl,dpaa:ethernet@3: Skip RX PCD High Priority FQs initialization
[    1.414805] fsl_dpa: fsl_dpa: Probed interface eth3
[    1.421284] fsl_dpa soc:fsl,dpaa:ethernet@4: Skip RX PCD High Priority FQs initialization
[    1.436427] fsl_dpa: fsl_dpa: Probed interface eth4
[    1.443122] fsl_dpa soc:fsl,dpaa:ethernet@5: Skip RX PCD High Priority FQs initialization
[    1.458682] fsl_dpa: fsl_dpa: Probed interface eth5
[    1.463837] fsl_dpa soc:fsl,dpaa:ethernet@8: of_find_device_by_node(/soc/fman@1a00000/ethernet@f0000) failed
[    1.473754] fsl_dpa: probe of soc:fsl,dpaa:ethernet@8 failed with error -22
[    1.480774] fsl_advanced: FSL DPAA Advanced drivers:
[    1.485751] fsl_proxy: FSL DPAA Proxy initialization driver
[    1.491677] fsl_oh: FSL FMan Offline Parsing port driver
[    1.497422] VFIO - User Level meta-driver version: 0.3
[    1.505453] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.512064] ehci-pci: EHCI PCI platform driver
[    1.516555] ehci-platform: EHCI generic platform driver
[    1.522021] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.528222] ohci-pci: OHCI PCI platform driver
[    1.532708] ohci-platform: OHCI generic platform driver
[    1.538650] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.544165] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    1.552277] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x42010810
[    1.561032] xhci-hcd xhci-hcd.0.auto: irq 46, io mem 0x02f00000
[    1.567455] hub 1-0:1.0: USB hub found
[    1.571239] hub 1-0:1.0: 1 port detected
[    1.575417] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.580928] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    1.589030] hub 2-0:1.0: USB hub found
[    1.592811] hub 2-0:1.0: 1 port detected
[    1.597030] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.602544] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    1.610612] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x42010810
[    1.619369] xhci-hcd xhci-hcd.1.auto: irq 47, io mem 0x03000000
[    1.625679] hub 3-0:1.0: USB hub found
[    1.629460] hub 3-0:1.0: 1 port detected
[    1.633612] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.639122] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    1.647221] hub 4-0:1.0: USB hub found
[    1.650987] hub 4-0:1.0: 1 port detected
[    1.655208] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    1.660717] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5
[    1.668801] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x42010810
[    1.677547] xhci-hcd xhci-hcd.2.auto: irq 48, io mem 0x03100000
[    1.683869] hub 5-0:1.0: USB hub found
[    1.687645] hub 5-0:1.0: 1 port detected
[    1.691800] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    1.697306] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6
[    1.705390] hub 6-0:1.0: USB hub found
[    1.709166] hub 6-0:1.0: 1 port detected
[    1.713486] usbcore: registered new interface driver usb-storage
[    1.722067] i2c /dev entries driver
[    1.727751] imx2-wdt 2ad0000.wdog: timeout 60 sec (nowayout=0)
[    1.734183] qoriq_cpufreq: Freescale QorIQ CPU frequency scaling driver
[    1.740840] CPUidle arm: CPU 0 failed to init idle CPU ops
[    1.746661] sdhci: Secure Digital Host Controller Interface driver
[    1.752862] sdhci: Copyright(c) Pierre Ossman
[    1.757308] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.803141] mmc0: SDHCI controller on 1560000.esdhc [1560000.esdhc] using ADMA 64-bit
[    1.812551] ledtrig-cpu: registered to indicate activity on CPUs
[    1.820798] platform caam_qi: Linux CAAM Queue I/F driver initialised
[    1.827302] caam 1700000.crypto: Entropy delay = 3200
[    1.832414] caam 1700000.crypto: Instantiated RNG4 SH0
[    1.859150] caam 1700000.crypto: Instantiated RNG4 SH1
[    1.864312] caam 1700000.crypto: device ID = 0x0a12060000000000 (Era 8)
[    1.870953] caam 1700000.crypto: job rings = 4, qi = 1, dpaa2 = no
[    1.882594] caam algorithms registered in /proc/crypto
[    1.890530] platform caam_qi: algorithms registered in /proc/crypto
[    1.895183] mmc0: new high speed MMC card at address 0001
[    1.895592] mmcblk0: mmc0:0001 DG4008 7.28 GiB 
[    1.895773] mmcblk0boot0: mmc0:0001 DG4008 partition 1 4.00 MiB
[    1.895952] mmcblk0boot1: mmc0:0001 DG4008 partition 2 4.00 MiB
[    1.896134] mmcblk0rpmb: mmc0:0001 DG4008 partition 3 4.00 MiB
[    1.899153] Alternate GPT is invalid, using primary GPT.
[    1.899185]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    1.935940] caam_jr 1710000.jr: registering rng-caam
[    1.941008] caam 1700000.crypto: caam pkc algorithms registered in /proc/crypto
[    1.948502] usbcore: registered new interface driver usbhid
[    1.954090] usbhid: USB HID core driver
[    1.959035] Freescale USDPAA process driver
[    1.963233] fsl-usdpaa: no region found
[    1.967092] Freescale USDPAA process IRQ driver
[    1.972273] Netfilter messages via NETLINK v0.30.
[    1.977126] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.983369] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[    1.989911] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
[    1.997329] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.002876] Initializing XFRM netlink socket
[    2.007278] NET: Registered protocol family 10
[    2.013375] Segment Routing with IPv6
[    2.017136] NET: Registered protocol family 17
[    2.021604] NET: Registered protocol family 15
[    2.026089] Bridge firewalling registered
[    2.030133] Ebtables v2.0 registered
[    2.031082] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[    2.040395] 8021q: 802.1Q VLAN Support v1.8
[    2.044617] Key type dns_resolver registered
[    2.049392] registered taskstats version 1
[    2.058823] VFS: Mounted root (squashfs filesystem) readonly on device 179:3.
[    2.068689] devtmpfs: mounted
[    2.071923] Freeing unused kernel memory: 640K
Booting image: 1, overlay: /dev/mmcblk0p4
[    2.909703] EXT4-fs (mmcblk0p4): recovery complete
[    2.914547] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[    2.986034] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    3.141672] EXT4-fs (mmcblk0p8): recovery complete
[    3.146495] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
switch_root: old root filesystem is not an initramfs: Success
[    4.270104] systemd[1]: System time before build time, advancing clock.
[    4.335539] systemd[1]: systemd 244.1-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.358066] systemd[1]: Detected architecture arm64.

Welcome to #[0;36mArch Linux ARM#[0m!

[    4.395802] systemd[1]: Set hostname to <CMJ-DOW>.
[    5.336198] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[    5.348613] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    5.359548] systemd[1]: Created slice system-getty.slice.
[#[0;32m  OK  #[0m] Created slice #[0;1;39msystem-getty.slice#[0m.
[    5.380658] systemd[1]: Created slice system-serial\x2dgetty.slice.
[#[0;32m  OK  #[0m] Created slice #[0;1;39msystem-serial\x2dgetty.slice#[0m.
[    5.404612] systemd[1]: Created slice User and Session Slice.
[#[0;32m  OK  #[0m] Created slice #[0;1;39mUser and Session Slice#[0m.
[    5.427484] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[#[0;32m  OK  #[0m] Started #[0;1;39mDispatch Password …ts to Console Directory Watch#[0m.
[    5.451410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[#[0;32m  OK  #[0m] Started #[0;1;39mForward Password R…uests to Wall Directory Watch#[0m.
[    5.475310] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[    5.487066] systemd[1]: Reached target Local Encrypted Volumes.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mLocal Encrypted Volumes#[0m.
[    5.507315] systemd[1]: Reached target Paths.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mPaths#[0m.
[    5.527230] systemd[1]: Reached target Remote File Systems.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mRemote File Systems#[0m.
[    5.547215] systemd[1]: Reached target Slices.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mSlices#[0m.
[    5.567251] systemd[1]: Reached target Swap.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mSwap#[0m.
[    5.587582] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[#[0;32m  OK  #[0m] Listening on #[0;1;39mDevice-mapper event daemon FIFOs#[0m.
[    5.621130] systemd[1]: Listening on Process Core Dump Socket.
[#[0;32m  OK  #[0m] Listening on #[0;1;39mProcess Core Dump Socket#[0m.
[    5.643494] systemd[1]: Listening on initctl Compatibility Named Pipe.
[#[0;32m  OK  #[0m] Listening on #[0;1;39minitctl Compatibility Named Pipe#[0m.
[    5.670543] systemd[1]: Listening on Journal Audit Socket.
[#[0;32m  OK  #[0m] Listening on #[0;1;39mJournal Audit Socket#[0m.
[    5.691667] systemd[1]: Listening on Journal Socket (/dev/log).
[#[0;32m  OK  #[0m] Listening on #[0;1;39mJournal Socket (/dev/log)#[0m.
[    5.715783] systemd[1]: Listening on Journal Socket.
[#[0;32m  OK  #[0m] Listening on #[0;1;39mJournal Socket#[0m.
[    5.737395] systemd[1]: Listening on udev Control Socket.
[#[0;32m  OK  #[0m] Listening on #[0;1;39mudev Control Socket#[0m.
[    5.759583] systemd[1]: Listening on udev Kernel Socket.
[#[0;32m  OK  #[0m] Listening on #[0;1;39mudev Kernel Socket#[0m.
[    5.784293] systemd[1]: Mounting Huge Pages File System...
         Mounting #[0;1;39mHuge Pages File System#[0m...
[    5.808360] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting #[0;1;39mPOSIX Message Queue File System#[0m...
[    5.836633] systemd[1]: Mounting Kernel Debug File System...
         Mounting #[0;1;39mKernel Debug File System#[0m...
[    5.863757] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[    5.879911] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    5.893431] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    5.904476] systemd[1]: Mounting FUSE Control File System...
         Mounting #[0;1;39mFUSE Control File System#[0m...
[    5.927913] systemd[1]: Mounting Kernel Configuration File System...
         Mounting #[0;1;39mKernel Configuration File System#[0m...
[    5.956047] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting #[0;1;39mRemount Root and Kernel File Systems#[0m...
[    5.982644] systemd[1]: Starting Apply Kernel Variables...
         Starting #[0;1;39mApply Kernel Variables#[0m...
[    6.006365] systemd[1]: Starting udev Coldplug all Devices...
         Starting #[0;1;39mudev Coldplug all Devices#[0m...
[    6.036107] systemd[1]: Mounted Huge Pages File System.
[#[0;32m  OK  #[0m] Mounted #[0;1;39mHuge Pages File System#[0m.
[    6.059795] systemd[1]: Mounted POSIX Message Queue File System.
[#[0;32m  OK  #[0m] Mounted #[0;1;39mPOSIX Message Queue File System#[0m.
[    6.083744] systemd[1]: Mounted Kernel Debug File System.
[#[0;32m  OK  #[0m] Mounted #[0;1;39mKernel Debug File System#[0m.
[    6.103698] systemd[1]: Mounted FUSE Control File System.
[#[0;32m  OK  #[0m] Mounted #[0;1;39mFUSE Control File System#[0m.
[    6.123848] systemd[1]: Mounted Kernel Configuration File System.
[#[0;32m  OK  #[0m] Mounted #[0;1;39mKernel Configuration File System#[0m.
[    6.149122] systemd[1]: Started Remount Root and Kernel File Systems.
[#[0;32m  OK  #[0m] Started #[0;1;39mRemount Root and Kernel File Systems#[0m.
[    6.172068] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    6.205960] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    6.217672] systemd[1]: Starting Load/Save Random Seed...
         Starting #[0;1;39mLoad/Save Random Seed#[0m...
[    6.235254] systemd[1]: Condition check resulted in Create System Users being skipped.
[    6.246321] systemd[1]: Starting Create Static Device Nodes in /dev...
         Starting #[0;1;39mCreate Static Device Nodes in /dev#[0m...
[    6.269341] systemd[1]: Started Apply Kernel Variables.
[#[0;32m  OK  #[0m] Started #[0;1;39mApply Kernel Variables#[0m.
[    6.294804] systemd[1]: Started Load/Save Random Seed.
[#[0;32m  OK  #[0m] Started #[0;1;39mLoad/Save Random Seed#[0m.
[    6.317339] systemd[1]: Started Create Static Device Nodes in /dev.
[#[0;32m  OK  #[0m] Started #[0;1;39mCreate Static Device Nodes in /dev#[0m.
[    6.343878] systemd[1]: Reached target Local File Systems (Pre).
[#[0;32m  OK  #[0m] Reached target #[0;1;39mLocal File Systems (Pre)#[0m.
[    6.367252] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[    6.378259] systemd[1]: Reached target Local File Systems.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mLocal File Systems#[0m.
[    6.402866] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[#[0;32m  OK  #[0m] Started #[0;1;39mEntropy Daemon based on the HAVEGE algorithm#[0m.
[    6.427566] systemd[1]: Condition check resulted in Rebuild Dynamic Linker Cache being skipped.
[    6.436503] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[    6.450172] systemd[1]: Starting Journal Service...
         Starting #[0;1;39mJournal Service#[0m...
[    6.467486] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[    6.480582] systemd[1]: Starting udev Kernel Device Manager...
         Starting #[0;1;39mudev Kernel Device Manager#[0m...
[    6.505215] systemd[1]: Started udev Coldplug all Devices.
[#[0;32m  OK  #[0m] Started #[0;1;39mudev Coldplug all Devices#[0m.
[    7.306649] systemd[1]: Started udev Kernel Device Manager.
[#[0;32m  OK  #[0m] Started #[0;1;39mudev Kernel Device Manager#[0m.
[    7.335348] audit: type=1130 audit(1576586649.064:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.335681] systemd[1]: Started Journal Service.
[#[0;32m  OK  #[0m] Started #[0;1;39mJournal Service#[0m.
[    7.375988] audit: type=1130 audit(1576586649.104:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting #[0;1;39mFlush Journal to Persistent Storage#[0m...
[    7.464374] systemd-journald[2518]: Received client request to flush runtime journal.
[    7.489805] systemd-journald[2518]: File /var/log/journal/f4bf4bd83fb54c69a5d0428fc4bbbfdd/system.journal corrupted or uncleanly shut down, renaming and replacing.
[#[0;32m  OK  #[0m] Started #[0;1;39mFlush Journal to Persistent Storage#[0m.
[    7.707200] audit: type=1130 audit(1576586649.432:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting #[0;1;39mCreate Volatile Files and Directories#[0m...
[#[0;32m  OK  #[0m] Found device #[0;1;39m/dev/ttyS0#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mCreate Volatile Files and Directories#[0m.
[    7.931339] audit: type=1130 audit(1576586649.660:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting #[0;1;39mRebuild Journal Catalog#[0m...
         Starting #[0;1;39mNetwork Time Synchronization#[0m...
[    7.984474] ina2xx 0-0040: error configuring the device: -6
         Starting #[0;1;39mUpdate UTMP about System Boot/Shutdown#[0m...
[    8.129308] audit: type=1127 audit(1576586649.856:6): pid=3034 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[#[0;32m  OK  #[0m] Started #[0;1;39mUpdate UTMP about System Boot/Shutdown#[0m.
[    8.207382] audit: type=1130 audit(1576586649.936:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[#[0;32m  OK  #[0m] Started #[0;1;39mRebuild Journal Catalog#[0m.
[    8.243765] audit: type=1130 audit(1576586649.972:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
         Starting #[0;1;39mUpdate is Completed#[0m...
[    8.271372] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
[    8.280132] lm90 0-004c: Failed to initialize device
[#[0;32m  OK  #[0m] Started #[0;1;39mUpdate is Completed#[0m.
[    8.311338] audit: type=1130 audit(1576586650.040:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.596313] random: crng init done
[#[0;32m  OK  #[0m] Listening on #[0;1;39mLoad/Save RF …itch Status /dev/rfkill Watch#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mNetwork Time Synchronization#[0m.
[    9.283316] audit: type=1130 audit(1576586651.012:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[#[0;32m  OK  #[0m] Reached target #[0;1;39mSystem Initialization#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mDaily Cleanup of Temporary Directories#[0m.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mSystem Time Set#[0m.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mSystem Time Synchronized#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mDaily rotation of log files#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mDaily verification of password and group files#[0m.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mTimers#[0m.
[#[0;32m  OK  #[0m] Listening on #[0;1;39mD-Bus System Message Bus Socket#[0m.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mSockets#[0m.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mBasic System#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mbup.service#[0m.
[    9.507431] audit: type=1130 audit(1576586651.236:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[#[0;32m  OK  #[0m] Started #[0;1;39mcwn-agent.service#[0m.
         Starting #[0;1;39mConfirm boot status in dual-boot system#[0m...
[#[0;32m  OK  #[0m] Started #[0;1;39mD-Bus System Message Bus#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mkernel#[0m.
         Starting #[0;1;39mA lightweight DHCP and caching DNS server#[0m...
[#[0;32m  OK  #[0m] Started #[0;1;39mHostapd IEEE 802.1…WPA2/EAP/RADIUS Authenticator#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mOpenSSH Daemon#[0m.
         Starting #[0;1;39mLogin Service#[0m...
         Starting #[0;1;39mPermit User Sessions#[0m...
[#[0;32m  OK  #[0m] Started #[0;1;39mConfirm boot status in dual-boot system#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mPermit User Sessions#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mGetty on tty1#[0m.
[#[0;32m  OK  #[0m] Started #[0;1;39mSerial Getty on ttyS0#[0m.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mLogin Prompts#[0m.
[#[0;1;31mFAILED#[0m] Failed to start #[0;1;39mA lightwei…t DHCP and caching DNS server#[0m.
See 'systemctl status dnsmasq.service' for details.
[   12.359137] 8188fu: loading out-of-tree module taints kernel.
[   12.373264] RTL871X: module init start
[   12.377066] RTL871X: rtl8188fu v4.3.23.6_20964.20170110
[   12.377069] RTL871X: build time: Mar 25 2020 21:10:49
[#[0;32m  OK  #[0m] Started #[0;1;39mLogin Service#[0m.
[   12.419802] kauditd_printk_skb: 12 callbacks suppressed
[   12.419808] audit: type=1130 audit(1576586654.148:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[#[0;32m  OK  #[0m] Reached target #[0;1;39mMulti-User System#[0m.
[#[0;32m  OK  #[0m] Reached target #[0;1;39mGraphical Interface#[0m.
[   12.486297] RTL871X: hal_com_config_channel_plan chplan:0x20
[   12.507735] fsl_dpa soc:fsl,dpaa:ethernet@5 rad4: renamed from eth5
[   12.543870] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=28:3e:76:00:11:db
[   12.557107] usbcore: registered new interface driver rtl8188fu
[   12.557113] RTL871X: module init ret=0
[   12.565920] IPv6: ADDRCONF(NETDEV_UP): rad4: link is not ready
[   12.569386] fsl_dpa soc:fsl,dpaa:ethernet@2 rad5: renamed from eth2
[   12.593405] audit: type=1130 audit(1576586654.320:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.595780] IPv6: ADDRCONF(NETDEV_UP): rad5: link is not ready
[   12.596651] fsl_dpa soc:fsl,dpaa:ethernet@0 rad1: renamed from eth0
[   12.629732] IPv6: ADDRCONF(NETDEV_UP): rad1: link is not ready
[   12.637300] fsl_dpa soc:fsl,dpaa:ethernet@1 rad2: renamed from eth1
[   12.665423] IPv6: ADDRCONF(NETDEV_UP): rad2: link is not ready
[   12.672080] fsl_dpa soc:fsl,dpaa:ethernet@4 rad3: renamed from eth4
[   12.709907] IPv6: ADDRCONF(NETDEV_UP): rad3: link is not ready
[   12.764545] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[   13.334602] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready


Arch Linux 4.14.16 (ttyS0)

CMJ-DOW login: [   15.345838] audit: type=1130 audit(1576586657.072:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=hostapd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.426371] RTL871X: assoc success
[   15.429866] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   15.437688] RTL871X: set group key camid:1, addr:00:00:00:00:00:00, kid:1, type:AES
[   15.500833] audit: type=1130 audit(1576586657.228:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnsmasq comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.604826] audit: type=1131 audit(1576586659.332:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.604773] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
�~x[   43.394086] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) 
[   43.425401] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) 
[   43.685368] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) 


Arch Linux 4.14.16 (ttyS0)