Circuit Hacking Monday
Circuit Hacking Mondays is a weekly get-together to learn electronics and learn to solder cool stuff!
What: Weekly get-together to solder cool stuff!
- You can easily learn all of the skills you need in one session.
- Make a project tonight, and take it home with you!
- If you have your own project (advanced or simple),
- bring it by, and if you would like help, you can get it!
When: 6:30pm till whenever -- some Mondays (on some Monday holidays, volunteer instructors might announce an Early start of 3:00pm. Look for the info on the discussion and announcements mailing lists: Discussion Announcements)
- Most projects take about an hour
Where: Noisebridge, 272 Capp St., San Francisco, 94114 (at 18th St., near 16th St. BART station).
- Map: Getting_Here
Who: You! It is fun to make things in the friendly community of Noisebridge.
- Come join us. Everyone is welcome.
Cost: Instruction is free! We ask that people pay only for the cost of the parts used -- kit prices range from FREE to $35. For more information see the list below for current kits
- volunteers who love soldering
Circuit Hacking is ON for Monday 4-October!
Mitch (co-founder of Noisebridge, now visiting from Berlin
Mitch's Wikipedia page
Everyone will learn about electronics and how to solder by making a simple, fun badge that has a blinky light and a flashlight -- and you can wear it home afterwards.
Learn to solder! Friendly Circuit Hacking Monday volunteers will bring kits for you to make and take home with you. The kits are cool, practical, intriguing, hackable projects that you can bring home after you make it. Of course, you can also bring your own projects to hack.
Plenty of cool kits have historically been available but most of these are not currently in stock, including:
- TV-B-Gone (turn off TVs in public places!)
- ArduTouch music synthesizer Make beautiful music, sound, and noise!)
- Trippy RGB Waves (interactive blinky lights!)
- "Hello My Name Is" badge (you may have seen me wearing mine)
- MiniPOV 3 (write messages in the air!)
- MiniPOV 4 (write messages in the air in COLOR!)
- MintyBoost (charge your USB enabled gadgets!)
- Drawdio (make noise by drawing lines with this pencil!)
- Atari Punk Console (make cool noise from an Altoids tin!)
- Diavolino (make your own shield-compatible Arduino!)
- LoL Shield (Lots of LEDs! for your Arduino!) Arduino required
- And more.
I am a blank slate! What should I do?
- make one of the many easy kits that are available each week.
- make an Arduino fade an RGB LED in varying color patterns.
- make a microcontroller illuminate a 3x3 LED matrix in varying shapes.
- reverse engineer something you're curious about.
- come to Noisebridge and brainstorm!
Learn More About Electronics and Circuits
All About Circuits
Soldering Is Easy
Surface Mount Soldering
Learn more on CHM kits on YouTube
J's Circuit Hacking Mondays Video Playlist
Introduction to Electronics Text: This is going deep to the rabbit hole
Electronic Applications Text: By now you are already taking the "Red Pill"
Stuff needed to run Circuit Hacking Monday
Electronics Medium Size Box
- soldering irons
- soldering iron stands
- cellulose sponges (cut small, and made wet with tap water)
- small wire snippers
- solder: 60/40 (Sn/Pb), rosin core, 0.031" or smaller diameter
- wire strippers
- soldering iron tip cleaner
- needle nose pliers
- solderless breadboards
- jumper wires
- Noisebridge stickers
If you have any kits to donate that you think would be great, please bring them by!
More info on many of these projects:
http://www.CornfieldElectronics.com (click on the "maker faire" tab)
Anyone can learn to solder! Even if you have never made anything in your life, you can learn this very useful and enjoyable skill. It really is fun! Volunteers at Noisebridge have taught tens of thousands of people to solder all around the world, and they can teach you, too! Add yourself to the ever increasing community!
As interest warrants:
- soldering (everything from through-hole to SMD rework)
- powering your circuit (bench power supplies, ATX hacking, batteries)
- making LEDs blink and fade
- programming microcontrollers
- using Arduino to make projects easy
- using oscilloscopes / multimeters to debug circuits
- reverse engineering circuits
- Designing PCBs using GEDA and EagleCAD
Everyone is welcome, regardless of experience level or age. If you have never made a circuit before and have no idea where to start, bring a few dollars ($10 to $30 to cover materials costs of a Brain Machine kit or other cool kits) and build it. Everyone gets personal attention, and everyone will learn enough to complete their project. If you have experience, please come and enjoy working on your project with others -- and share what you know!
Learn and share with others of all skill levels! You can come with an idea, or a question, or a circuit you want to hack. You can research ideas on the Internet ahead of time and come put them into practice! Or, you can learn with a large selection of easy-to-make kits that are available each week.
What can I bring to help?
No need to bring anything -- just yourself and your desire to play, learn, and/or share. We have everything you need. But if you like, you can bring:
- Your own tools (we have all you need, but you can bring your own)
- Arduino / clones
- USB - serial dongle for your Arduino
- If you bring your laptop, we can set it up to program microcontrollers
- 9V or AA or AAA or other batteries (a bulk donation would be great)
- parts for your own project(s)