Closing: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
m (Lxpk moved page Lock Up Procedures to Closing: excessively verbose name)
(9 intermediate revisions by 5 users not shown)
Line 1: Line 1:
At 10 PM and afterwards, if you're the last person with RFID access leaving the space, please follow these lock up procedures.
{{participation}}
{{boxstart}}
Learning how to lock up is part of becoming a philanthropist or member. At 10 PM and afterwards, if you're the last person with RFID access leaving the space, please follow the lock-up procedures.  
{{boxend}}


== Lock Up Checklist ==
== Lock Up Checklist ==
Line 9: Line 12:
* Hatch to the roof in the fox mural area is latched
* Hatch to the roof in the fox mural area is latched
* All windows are shut
* All windows are shut
** It's okay if the window with the air sensor behind the VR green screen is a little open for the air sensor cord
* [[#Coffee maker|The coffee maker]] is unplugged
* [[#Coffee maker|The coffee maker]] is unplugged
* [[#Tea maker|The tea maker]] is unplugged
* [[#Tea maker|The tea maker]] is unplugged
* [[#Kiln|The kiln]] is unplugged
* [[#Kiln|The kiln]] is unplugged
* [[#Iron|The iron]] is unplugged (sewing area)
* [[#3D printers|The 3D printers]] are turned off
* [[#3D printers|The 3D printers]] are turned off
* All lights are off.
* All lights are off.
Line 24: Line 29:
* The [[#Main door|main door into the space]] at the top of the space is locked
* The [[#Main door|main door into the space]] at the top of the space is locked
* The elevator is on the first floor.
* The elevator is on the first floor.
* The [[#Surveillance Monitor|surveillance monitor]] at the door is off


== People ==
== People ==
Line 53: Line 59:
This is the kiln, and it should be unplugged before the space is locked up.
This is the kiln, and it should be unplugged before the space is locked up.
[[File:Noisebridge_kiln.png|200px|thumb|none|Noisebridge kiln]]
[[File:Noisebridge_kiln.png|200px|thumb|none|Noisebridge kiln]]
===Iron===
This is the iron and it should be unplugged.  It's usually stored in the sewing area by the thread.


=== 3D printers ===
=== 3D printers ===
Line 65: Line 74:
These are the LED lights in the circuit hacking space. When these are turned off (through a switch on the power bars), then the entire power bar is turned off, including any soldering irons plugged in.
These are the LED lights in the circuit hacking space. When these are turned off (through a switch on the power bars), then the entire power bar is turned off, including any soldering irons plugged in.
[[File:Noisebridge_circuit_hacking_lights.png|200px|thumb|none|Noisebridge circuit hacking LED lights]]
[[File:Noisebridge_circuit_hacking_lights.png|200px|thumb|none|Noisebridge circuit hacking LED lights]]
=== Surveillance Monitor ===
Press this button to turn off the monitor.
[[File:Turn-off-monitor.jpeg|200px|thumb|none|Noisebridge security monitor]]


=== Main door ===
=== Main door ===
This is the main door. After the rest of the space has been secured, this should be closed and should lock automatically.
This is the main door. After the rest of the space has been secured, this should be closed and should lock automatically.
[[File:Noisebridge_main_door.png|200px|thumb|none|Noisebridge main door]]
[[File:Noisebridge_main_door.png|200px|thumb|none|Noisebridge main door]]

Revision as of 01:29, 19 June 2020

Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Resources | Events | Projects | 5MoF | Meetings | Donate | (Edit)
Manual | Visitors | Participation | Excellence | Do-ocracy | Consensus | Standards | Outreach | Operations | Cleaning | (Edit) | Category
Participation | Joining | Maintainers Wanted | Meetings | Events | To-do-ocracy Thursdays | Edit

Learning how to lock up is part of becoming a philanthropist or member. At 10 PM and afterwards, if you're the last person with RFID access leaving the space, please follow the lock-up procedures.

Lock Up Checklist

Please make sure that

People

Please ask everyone to finish up hacking and leave the space with you. If someone doesn't want to leave, please inform them after 10 PM that non-24-hour users are not allowed to remain in the space after the last 24-hour access token holder leaves, and that they need to leave with you. If this is a problem for them and they don't want to leave, there is an emergency contact list on the top door so that we can raise an alarm and potentially get some more Members over to you to help close the space. Alternatively, call the local police. We've been operating this people-need-to-leave-after-10pm model since the September 2014 Noisebridge Reboot and this shouldn't be news to anyone at this point.

Things

Elevator room gate

This is the elevator room gate, and it should be locked at the end of the day.

Noisebridge elevator room gate

Fire escape door

This is the fire escape door. It should be closed, and the latch Trent is pointing to should be secure.

Noisebridge fire escape. Trent is pointing to the first latch that must be secured.

Note that to close the door completely, the latch at the bottom of the door must be lifted up. This latch must also be secured.

Noisebridge fire escape bottom latch. This latch must be lifted to close the door all the way, but it should be put back and secured afterwards.


Tea maker

This is the tea maker, and it should be unplugged before the space is locked up.

Noisebridge tea maker

Coffee maker

This is the coffee maker, and it should be unplugged before the space is locked up.

Noisebridge coffee maker

Kiln

This is the kiln, and it should be unplugged before the space is locked up.

Noisebridge kiln

Iron

This is the iron and it should be unplugged. It's usually stored in the sewing area by the thread.

3D printers

These are the two 3D printers, and they should be turned off before the space is locked up. The off switch is on the back bottom left corner.

Noisebridge 3D printers

Hackatorium lights

These are the octopus lights in the hackatorium. Each one has its own off switch.

Noisebridge hackatorium lights

Circuit hacking LED lights

These are the LED lights in the circuit hacking space. When these are turned off (through a switch on the power bars), then the entire power bar is turned off, including any soldering irons plugged in.

Noisebridge circuit hacking LED lights

Surveillance Monitor

Press this button to turn off the monitor.

Noisebridge security monitor

Main door

This is the main door. After the rest of the space has been secured, this should be closed and should lock automatically.

Noisebridge main door