Connex 350

From Noisebridge
Jump to navigation Jump to search
Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Resources | Events | Projects | 5MoF | Meetings | Donate | (Edit)
Guilds | Meta | Code | Electronics | Fabrication | Games | Sewing | Music | AI | Neuro | Philosophy | Funding | Art | Security | Ham | Brew | (Edit)
Fabrication | Sewing | 3D Printing | Wood Shop | Metal Shop | SparkleForge | Laser Cutter | Vinyl Cutter | (Edit)
3D Printing | Notes | Monoprice Miniprinters | Creality CR-10 | EmberPrinter | Connex 350 | Edit

The Stratasys Connex Objet350 is our very big multifilament printer which is currently undergoing repairs.

Current Problems[edit | edit source]

  Cant maintain proper pressure (auto turnoff)
   -Vacuum broken (improbable)
   -Cracked Cable (likely)
   -Flooded Vaccum (cleaned out)
   Maggots in the lining
  One print head not receiving proper voltage
   -Broken head
   -Messed main board
   -Messed up wiring
  One head wont light up
    -Broken head
    -Not plugged in properly
    -Gunk in contacts
  Maybe temperature sensor broken (previous maintainers said so)
    -Unknown reason

What is it[edit | edit source]

The Objet Connex350™ features Objet’s pioneering multi-material 3D printing capability with an intermediate-size build tray of 350 x 350 x 200mm. It enables designers and engineers to rapidly build prototypes to simulate their intended end-product closer than any other technology.

The Objet Connex 350 features:

  • Multi-material models – eliminating the need to design, print and glue separate model elements together
  • Different parts. Different materials. Same tray – saves time and serves multiple requirements simultaneously
  • Outstanding 16-micron, high-resolution print layer accuracy
  • 600 DPI X & Y resolution
  • Thin walls down to 0.6mm (0.024″)
  • High throughput – Up to 20mm per hour per strip
  • Reliability and robustness – at least 72 hours of non-stop build capacity
  • High speed – simultaneously print multiple items of different materials; models cure while printing; models can be handled immediately after print
  • Easy-to-remove support material enabling complex geometries
  • Office convenience– Quiet system, using fully-sealed REACH compliant cartridges that are easy to load and unload

Most work done and organization done in Slack[edit | edit source]