Darkroom/Resources/Canon CanoScan 8600F: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
Line 1: | Line 1: | ||
[[File:20130430_goldenGateBeach.jpg]] | |||
==Does it work== | ==Does it work== | ||
So far so good using Windows 7 (x64) | So far so good using Windows 7 (x64) |
Revision as of 21:13, 7 May 2013
Does it work
So far so good using Windows 7 (x64)
What does it scan
35mm film loader will scan 12 frames per batch!
Where does it live
In a brown paper bag (with my face)
What belongs to the scanner
- Scanner!
- AC/DC adapter
- USB cable
- Film Guides: 35mm (negative/positive), 35mm (negative/positive mounted slides (may be missing enclosure)), & 120 roll film strip
Loaders
Loaders are black and straight forward to use(compared to HP - which I tried, but to no avail). Also, I used the CanoScan Toolbox software too (link below). NOTE: Don't forget to take off the white protective plate located on the underside of the scanner bed top (door?) - It won't work without this piece out!!
Manual
Drivers
Driver and CanoScan Toolbox: http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_8600f
It appears there are Linux drivers as well, however they have not been tested.