Darkroom/Resources/HP Scanjet G4010: Difference between revisions
Jump to navigation
Jump to search
(Created page with '==Where does it live== Currently on top of the black help in the darkroom. ==What belongs to the scanner== *Scanner! *AC/DC adapter (labeled) *USB cable *Built in 35mm loader *R…') |
No edit summary |
||
Line 1: | Line 1: | ||
==Does it work== | |||
Yes, for the most part! | |||
==What does it scan== | |||
Flatbed things, 35mm | |||
==Where does it live== | ==Where does it live== | ||
Currently on top of the black help in the darkroom. | Currently on top of the black help in the darkroom. | ||
Line 19: | Line 25: | ||
==Drivers== | ==Drivers== | ||
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3236365&lang=en&cc=us&taskId=135&prodTypeId=15179&prodSeriesId=3236364 | http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3236365&lang=en&cc=us&taskId=135&prodTypeId=15179&prodSeriesId=3236364 | ||
Should work with Sane under Linux. |
Revision as of 20:41, 12 November 2010
Does it work
Yes, for the most part!
What does it scan
Flatbed things, 35mm
Where does it live
Currently on top of the black help in the darkroom.
What belongs to the scanner
- Scanner!
- AC/DC adapter (labeled)
- USB cable
- Built in 35mm loader
- Replacement loaders for 35mm, slides, medium format
Loaders
The built in loader is white, it's built in, you'll know what I mean when see it. This particular loader I found to be about 2-4mm too skinny, so I took a Dremel to it. That was a dumb idea and it's kind of crap tastic now.
I ordered a replacement loader from a site that said should work, words from HP apparently. When I got the loader, loaders actually, they're totally not specifically made for the G4010, but it lines up right, it just might work. Haven't tested.
Manual
Drivers
Should work with Sane under Linux.