Doorbell

From Noisebridge
Jump to navigation Jump to search


Doorbell 2.0

Arduino-based, includes lights and a customizable tone.

Troubleshooting

* Hit the reset key on the Arduino
* Re-upload or modify the Arduino sketch

Some arduino code (Improvements & ethernet functionality coming soon!)

If this fails you can revert to doorbell 1.0.

Doorbell 1.0

Via original intercom box.

Fallback instructions.

Go to the intercom box by the top door:

* Ensure the buzzer switch on the top is set to 'On'
* Unplug the audio cable from the side of the intercom box by the door.

Doorbell 1.0 functionality should work