EagleCAD workshop

From Noisebridge
(Difference between revisions)
Jump to: navigation, search
(Undo revision 14444 by Abenaqadat (Talk))
(Next scheduled workshop)
Line 12: Line 12:
 
Following a very successful and popular Eagle CAD workshop back in June 2009, we'll be having some in December 2010.
 
Following a very successful and popular Eagle CAD workshop back in June 2009, we'll be having some in December 2010.
  
Proposed:
+
   
#. Getting started with EagleCAD   
+
; '''Monday Dec 6, 7PM-10PM ''' -- Getting started with EagleCAD   
#. Getting Stuff Done with EagleCAD and Not Punching Out the Monitor
+
: Unless someone has a stunning idea, let's make a NoiseNoise board:  crunchy goodness yet simple!
#. Tape Out, DFM, and PCB manufacture.  
+
; '''Monday Dec 13, 7PM-10PM ''' -- Getting Stuff Done with EagleCAD and Not Punching Out the Monitor
 +
: Further progress on the NoiseNoise board. If you missed the first session we'll have a refresher.
 +
; '''Monday Dec 20, 7PM-10PM ''' -- Tape Out, DFM, and PCB manufacture.
 +
: Finish the layout, lick the silkscreen, make the Gerber files, check 'em, and possibly submit for manufacture.  
  
 
====Potential Topics====
 
====Potential Topics====
  
We can cover most of the below in 3 nights. Feel free to add topics, then let's use the [[Talk:EagleCAD_workshop|talk page]] to vote for what we want most to cover.
+
We can cover most of the basics in 3 nights. Feel free to add topics.
  
 
**What is EAGLE, 15 minute refresher on making a schematic and laying out a board.
 
**What is EAGLE, 15 minute refresher on making a schematic and laying out a board.

Revision as of 00:55, 2 December 2010

Contents

EagleCAD

EagleCAD is a computer-aided tool for schematic capture and designing printed circuit boards that runs on Macs, Linux, and Windows. There is a free (as in beer) version available here:

http://www.cadsoftusa.com/freeware.htm

The free version is slightly crippled in terms of the size of the board you can design but is perfectly fine for most hobbyist use. In fact, it's the hobbyist industry standard and there are a wealth of resources from instructions to example parts and boards. (For example most SparkFun open hardware boards come with EagleCAD layout and schematics.)

Next scheduled workshop

Following a very successful and popular Eagle CAD workshop back in June 2009, we'll be having some in December 2010.


Monday Dec 6, 7PM-10PM -- Getting started with EagleCAD
Unless someone has a stunning idea, let's make a NoiseNoise board: crunchy goodness yet simple!
Monday Dec 13, 7PM-10PM -- Getting Stuff Done with EagleCAD and Not Punching Out the Monitor
Further progress on the NoiseNoise board. If you missed the first session we'll have a refresher.
Monday Dec 20, 7PM-10PM -- Tape Out, DFM, and PCB manufacture.
Finish the layout, lick the silkscreen, make the Gerber files, check 'em, and possibly submit for manufacture.

Potential Topics

We can cover most of the basics in 3 nights. Feel free to add topics.

    • What is EAGLE, 15 minute refresher on making a schematic and laying out a board.
  • Expanding into new topics
    • Making custom devices and libraries
      • How to make the pin outs and footprints from a data sheet, possibly recycling someone else's similar part.
      • How to label the part correctly and control what layers show on the board view (this can be confusing!)
    • Autorouting: worth it or not?
    • Error checking: ERC and DFM.
    • How to fab a board.
      • "tape out:" Exporting gerber and drill files using a CAM processor
      • Checking the gerber files in a non-Eagle viewer program
      • Uploading to fab houses
    • Panelizing (step-and-repeat copying) designs using gerbmerge (one way around EagleCad board size limitation)
    • More advanced tricks like logo images in the silkscreen layer

Tutorials

Very introductory Sparkfun tutorial, has some good info on outputting gerber files.

Larry Klingenberg's Double Sided Board Tutorial

An instructable on making your own components.

More info, tutorials, etc. from the SWARM wiki: http://wiki.orbswarm.com/index.php?title=The_PC_Board_Page

List of EagleCAD "gotchas"

I promised I would post my list of "gotchas;" hope this helps avoid some irritation! Jtfoote 23:38, 27 April 2009 (PDT)

  1. IF BOARD AND SCHEMATIC GET OUT OF SYNC, YOU ARE SCREWED. This can happen if updates on the schematic don't make it to the board. To avoid this, always keep board file open when editing schematic, and vice versa! Use "rip up" instead of "delete" on the board. DRC will tell you when you are not in sync, otherwise you won't know. Use it often, and save often.
  2. Don't click on "Drop" button when adding a component. Hit "cancel." "Drop" "drops" the library (!)
  3. tOrigin layers must be visible to move/rotate components.
  4. Overlapping wires sometimes don't logically connect. Add junction (green dot) if a problem. Check by moving component and seeing if wire moves with it.
  5. "Cut" (scissor icon) is really "copy to paste buffer" and only works on groups! Use "copy" for single items. In V5, use shift-right-click or menu item to copy/move groups.
  6. Pay attention to messages in the status bar, they are often helpful. For example when trying to select things on top of each other, clicking will cycle through each and the status bar will tell you how to select the one you want.

Checking Gerber file output

You will want to check that things look OK. Use a gerber file viewer like ViewMate (reg req) http://www.pentalogix.com/Download/download.html#item8

or GerbView (free, open source, a little buggy) http://sourceforge.net/projects/gerbv/


PCB Fab Houses

Where to get your printed circuit boards fabricated after you've designed them

Lady Ada has a PCB cost calculator with most sources: http://www.ladyada.net/library/pcb/costcalc.html

The following is a biased list from Jtfoote 09:36, 5 May 2009 (PDT)

  • Gold Phoenix: cheapest, longer turn-around (sent from China), fine quality, no charge for "panelization," can submit multiple boards for one run. SparkFun uses them; so could we, if we want to combine orders. They don't have web upload; you email your gerbers to some dude, but it worked great for me.
  • Sierra Proto Express: I found this best combination of price/turn around time for small orders and prototypes, and they're local (Sunnyvale). Silkscreen was a little smeary if that bugs you; still perfectly readable.
  • Advanced Circuits 4pcb.com (same as 33each.com and others) Good quality, slick marketing, more expensive than they seem (not-well-advertised setup charges and minimums). Avoid for small runs, but definitely use their free gerber file check site: http://www.freedfm.com/
  • Windell at EMSL recommends ourpcb and his boards always look great. Haven't personally tried.

One reponse to Skory's list email said:

<quote> I have had good luck with both Sunstone Circuits (http://www.sunstone.com/) and Advanced Circuits (http://www.4pcb.com/). My order sizes have been 2, 100, and 350 boards. </quote>

Personal tools