Elevator: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
m (Adding categories)
(Add broken status)
Line 1: Line 1:
'''Current Status: Non-Operational as of 2017-07-28'''
Use the [[Elevator_Buzzer|elevator buzzer]] if you need assistance, or if the call buttons do not work.
Use the [[Elevator_Buzzer|elevator buzzer]] if you need assistance, or if the call buttons do not work.


The elevator light fixture uses a [http://en.wikipedia.org/wiki/GU24_connector GU24 base] rather than a [http://en.wikipedia.org/wiki/Edison_screw "screw-in"] socket - it requires a 26 watt / GU24 base bulb (such as Eco-Stor model # P26SP-GU24/WW - about $6 + tax from [http://www.discountbuilderssupplysf.com/directions.php Discount Builder Supply] on 13th Street and Mission)
The elevator light fixture uses a [http://en.wikipedia.org/wiki/GU24_connector GU24 base] rather than a [http://en.wikipedia.org/wiki/Edison_screw "screw-in"] socket - it requires a 26 watt / GU24 base bulb (such as Eco-Stor model # P26SP-GU24/WW - about $6 + tax from [http://www.discountbuilderssupplysf.com/directions.php Discount Builder Supply] on 13th Street and Mission)


Current Status: call buttons operational, call light on first floor fixed (120V M5).  Whole system sometimes does not realize it is not in operation, at which time the call buttons do not work.  Only known fix for this is to get inside, ride it to another floor, and exit normally.  Sometimes you have to do this a couple times.
Historical Note: Whole system sometimes does not realize it is not in operation, at which time the call buttons do not work.  Only known fix for this is to get inside, ride it to another floor, and exit normally.  Sometimes you have to do this a couple times.


'''July 27 2010 Test report:'''
'''July 27 2010 Test report:'''

Revision as of 12:03, 28 July 2017

Current Status: Non-Operational as of 2017-07-28

Use the elevator buzzer if you need assistance, or if the call buttons do not work.

The elevator light fixture uses a GU24 base rather than a "screw-in" socket - it requires a 26 watt / GU24 base bulb (such as Eco-Stor model # P26SP-GU24/WW - about $6 + tax from Discount Builder Supply on 13th Street and Mission)

Historical Note: Whole system sometimes does not realize it is not in operation, at which time the call buttons do not work. Only known fix for this is to get inside, ride it to another floor, and exit normally. Sometimes you have to do this a couple times.

July 27 2010 Test report:

1st floor call button normally closed contacts were impacted with nonconductive dirt. Cleaning is performed with simple white paper, not anything else. Please, if you ever clean these call button relays do not use abrasives, they shorten the life of the relay. Also be sure to take voltage precautions since the switch has 120VAC across it.

When any call button doesn't work, the whole system doesn't work. Is that what is called 'failsafe'?

There's a PDF for an elevator test plan uploaded to the Noisebridge wiki for the elevator. Test monthly.

File:ElevatorTestplan.pdf