What's the project?
We have built a display at Noisebridge inspired by projects such as Muro de botellas or Mate Light. Our goal was to have it completed for Maker Faire 2016 to be shown as part of our booth and we were two weeks ahead of schedule. After the MakerFaire, the display will be permanently installed within Noisebridge and possibly rented out for events.
This idea was inspired by the c-base matelight display shown at the 32c3 and the 2015 Chaos Communication Camp. Our code and hardware that drives up to 16 LED strips from a Raspberry Pi is on Flaschen-Taschen github. We are using 9 strips in this project, one for each crate column.
FlaschenTaschen is 9' 9" wide 7' 7" tall (about 3m x 2.3m) and host 1575 lights. See the drawings at the bottom of this page for the design.
Here is the first view of the completed project
The network protocol is quite simple: essentially send a PPM picture (P6) in a UDP packet to ft.noise:1337.
For instance, try the following all in the comfort of you shell (in bash, to be precise, that conveniently provides the /dev/udp pseudo-path):
bash$ jpegtopnm myimage.jpg | pnmscale -xysize 45 35 > /dev/udp/ft.noise/1337
(There are also two additional protocols that can be enabled on the server-side: OpenPixelControl and PixelPusher).
We added an extension to the PPM format that allows to set an (x/y)-offset and a stacking-layer, see details on github.
There are sample utilities in the repository to send and scroll arbitrary images (including animated gifs), videos or text. There is a C++ class that you can use right away to send images to FlaschenTaschen including a couple of examples. It is also extremely simple to write your own client in any language that supports networking (See protocols section in documentation).
See all the details here https://github.com/hzeller/flaschen-taschen
The next hackathon to make content is on Sunday evening 2016-05-08.
Requirement for Bottles
Check out this amazing matrix of beverages and sellers!
- We need a good amount of Coronita bottles.
- Club Mate
Please rinse bottles after drinking them
Where to buy in bulk
List out where we could buy some of these in bulk for the drink ups
Costco should have Corona for <= $1 a bottle.
Current Mechanical Design Documentation
This .PDF file is the current drawing set. Please take a look.
Due Date Event / Required Goals
2016-04-17 48 Show Ready crates complete
2016-04-22 Software and Electronics night!
2016-04-23 Crate build: Catch up day.
2016-04-24 54 Show Ready crates complete
2016-05-01 60 Show Ready crates complete
2016-05-08 FlaschenTaschen - Substantial Completion - All Show Ready crates completed, mounted, and stacked. Minor tweaks to construction allowed. Software/Hardware development continues if needed. Create list of final Tasks
2016-05-08 66 Show Ready crates complete
2016-05-15 FlaschenTaschen Final Completion <-- And we were done at 2016-05-06
2016-05-18 Pack FlaschenTaschen for Maker Faire
2016-05-19 MakerFaire Setup Day - Transport to San Mateo
2016-05-19 Pre Maker Faire 5MoF?
2016-05-20 MAKER FAIRE!!!
2016-05-22 Maker Faire Takedown and Transport home to NB
2016-05-28 Begin Install of FlaschenTaschen crates at Noisebridge.