Flashrd: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
== flashrd ==
== flashrd ==


flashrd is an OpenBSD installer tailored for flash-backed devices that have at least 1Gb of flash and 128Mb of RAM. Here's the [http://www.nmedia.net/flashrd/ project's homepage]
flashrd is an OpenBSD installer tailored for flash-backed devices that have at least 1Gb of flash and 128Mb of RAM. Here's the [http://www.nmedia.net/flashrd/ project's homepage].


== Installing flashrd ==
== Installing flashrd ==
Line 11: Line 11:
dd the new flashrd images to the existing flash cards.
dd the new flashrd images to the existing flash cards.


Mount the flash cards or boot the flash card using qemu, modify /etc/ttys as follows:
Mount the flash cards, boot into single user mode, or boot the flash card using qemu, then modify /etc/ttys as follows:


<pre>
<pre>
Line 24: Line 24:
<pre>
<pre>
set timeout 5
set timeout 5
stty com0 9600
set tty com0
set tty com0
</pre>
</pre>

Revision as of 15:01, 27 October 2010

flashrd

flashrd is an OpenBSD installer tailored for flash-backed devices that have at least 1Gb of flash and 128Mb of RAM. Here's the project's homepage.

Installing flashrd

Download the flashrd binary images.

Backup the existing flash cards using dd.

dd the new flashrd images to the existing flash cards.

Mount the flash cards, boot into single user mode, or boot the flash card using qemu, then modify /etc/ttys as follows:

19c19
< tty00 "/usr/libexec/getty std.9600" unknown off
---
> tty00 "/usr/libexec/getty std.9600" vt220 on secure

Add this to /flash/etc/boot.conf: (/flash is on /dev/wd0a)

set timeout 5
stty com0 9600
set tty com0

Plug the flash cards into the existing devices, boot as follows:

boot> set tty com0
switching console to com0
                         >> OpenBSD/i386 BOOT 3.02
boot> boot
booting hd0a:/bsd: 10707316+1055248 [52+360656+344597]=0xbe4014
entry point at 0x200120

Usage notes

To boot the older flash images, "boot -s" and then "/stand/rc" or "sh /etc/rc". If you need to use the network, remember to do "pfctl -d".

Once you have a serial console on the new image, copy /etc/hostname.*, /etc/ssh/*key*, and /root/.ssh/authorized_keys to the new image from the old image. Upon reboot you should be able to log in.

Files to copy from /etc:

hosts x
dhcpd.conf x
resolv.conf x
myname x
rc.conf.local x
pf.conf x
localtime x
snmpd.conf x
rtadvd.conf x
hostname.*
master.passwd x
ntpd.conf x
passwd x
ttys x
sysctl.conf x
mygate x
dnsmasq.conf x

Packages to install:

export PKG_PATH=ftp://ftp.openbsd.org/pub/OpenBSD/4.7/packages/i386/
pkg_add -v dnsmasq lsof curl bash iperf isc-dhcp-server net-snmp ngrep bwm-ng