Editing Fort Inventory

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
<font size="5">[[Fort]]</font>
== Microcontrollers ==


== Microcontrollers ==
=== MSP430 ===
=== MSP430 ===
==== BoosterPacks ====
* CC110L AIR Module BoosterPack [https://www.anaren.com/air/cc110l-air-module-boosterpack-embedded-antenna-module-anaren#overlay-context=air/air-boosterpack]
* Capacitive Touch BoosterPack [http://www.ti.com/tool/430boost-sense1]


=== Arduino ===
=== Arduino ===
==== Shields ====
* Ethernet Shield


== Sensors ==
== Sensors ==
=== Distance ===
* HC-SR04 [http://www.micropik.com/PDF/HCSR04.pdf]


=== Compass ===
=== Compass ===
* Hitachi HM55B Compass Module [http://www.hobbyengineering.com/H2112.html]
* Hitachi HM55B Compass Module
* Magnetic Compass [http://www.hobbyengineering.com/H1067.html]
 
=== GPS ===
* Parallax GpS Receiver [http://www.parallax.com/dl/docs/prod/acc/gpsreceivermanual1.0.pdf]


=== Accelerometer ===
=== Accelerometer ===
* Hitachi H48C 3-Axis Accelerometer Module [http://www.hobbyengineering.com/H2957.html]
* Hitachi H48C 3-Axis Accelerometer Module
** Measure 3 g on any axis
** Measure 3 g on any axis
** Free-fall output indicates simultaneous 0g an all axes
** Free-fall output indicates simultaneous 0g an all axes
Line 31: Line 17:
** Wide operational range: -25 to 75 C  
** Wide operational range: -25 to 75 C  


* Memsic 2125 Dual-Axis Accelerometer [http://www.hobbyengineering.com/H1581.html]
* Memsic 2125 Dual-Axis Accelerometer
** Measure 0 to 2 g on either axis; less than 1 mg resolution
** Measure 0 to 2 g on either axis; less than 1 mg resolution
** Fully temperature compensated over 0 to 70 C range
** Fully temperature compensated over 0 to 70 C range
Line 39: Line 25:


=== Temperature ===
=== Temperature ===
* SHT11 Temperature and Humidity Sensor Module [http://www.hobbyengineering.com/H1509.html]
* SHT11 Temperature and Humidity Sensor Module
** Temperature range: -40 F (-40 C) to +254.9 F (+123.8 C)
** Temperature range: -40 F (-40 C) to +254.9 F (+123.8 C)
** Temp. accuracy: +/- 0.5 C @ 25 C<
** Temp. accuracy: +/- 0.5 C @ 25 C<
** Humidity range: 0 to 100% RH
** Humidity range: 0 to 100% RH
** Absolute RH accuracy: +/- 3.5% RH
** Absolute RH accuracy: +/- 3.5% RH
== Audio ==
* uMP3 Playback Module [http://www.roguerobotics.com/products/electronics/ump3]
== Data Logging ==
* uMMC Serial Data Module [http://www.roguerobotics.com/products/electronics/ummc]
== Displays ==
* OLED 96x64 [http://www.adafruit.com/products/684]
Please note that all contributions to Noisebridge are considered to be released under the Creative Commons Attribution-NonCommercial-ShareAlike (see Noisebridge:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following CAPTCHA:

Cancel Editing help (opens in new window)