Fort Inventory: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
No edit summary |
||
(One intermediate revision by the same user not shown) | |||
Line 2: | Line 2: | ||
== Microcontrollers == | == Microcontrollers == | ||
=== MSP430 === | |||
=== | ==== BoosterPacks ==== | ||
* CC110L AIR Module BoosterPack [https://www.anaren.com/air/cc110l-air-module-boosterpack-embedded-antenna-module-anaren#overlay-context=air/air-boosterpack] | |||
* Capacitive Touch BoosterPack [http://www.ti.com/tool/430boost-sense1] | |||
=== Arduino === | === Arduino === | ||
==== Shields ==== | |||
* Ethernet Shield | |||
== Sensors == | == Sensors == | ||
=== Distance === | |||
* HC-SR04 [http://www.micropik.com/PDF/HCSR04.pdf] | |||
=== Compass === | === Compass === | ||
* Hitachi HM55B Compass Module | * Hitachi HM55B Compass Module [http://www.hobbyengineering.com/H2112.html] | ||
* Magnetic Compass [http://www.hobbyengineering.com/H1067.html] | |||
=== GPS === | |||
* Parallax GpS Receiver [http://www.parallax.com/dl/docs/prod/acc/gpsreceivermanual1.0.pdf] | |||
=== Accelerometer === | === Accelerometer === | ||
* Hitachi H48C 3-Axis Accelerometer Module | * Hitachi H48C 3-Axis Accelerometer Module [http://www.hobbyengineering.com/H2957.html] | ||
** Measure 3 g on any axis | ** Measure 3 g on any axis | ||
** Free-fall output indicates simultaneous 0g an all axes | ** Free-fall output indicates simultaneous 0g an all axes | ||
Line 19: | Line 31: | ||
** Wide operational range: -25 to 75 C | ** Wide operational range: -25 to 75 C | ||
* Memsic 2125 Dual-Axis Accelerometer | * Memsic 2125 Dual-Axis Accelerometer [http://www.hobbyengineering.com/H1581.html] | ||
** Measure 0 to 2 g on either axis; less than 1 mg resolution | ** Measure 0 to 2 g on either axis; less than 1 mg resolution | ||
** Fully temperature compensated over 0 to 70 C range | ** Fully temperature compensated over 0 to 70 C range | ||
Line 27: | Line 39: | ||
=== Temperature === | === Temperature === | ||
* SHT11 Temperature and Humidity Sensor Module | * SHT11 Temperature and Humidity Sensor Module [http://www.hobbyengineering.com/H1509.html] | ||
** Temperature range: -40 F (-40 C) to +254.9 F (+123.8 C) | ** Temperature range: -40 F (-40 C) to +254.9 F (+123.8 C) | ||
** Temp. accuracy: +/- 0.5 C @ 25 C< | ** Temp. accuracy: +/- 0.5 C @ 25 C< | ||
** Humidity range: 0 to 100% RH | ** Humidity range: 0 to 100% RH | ||
** Absolute RH accuracy: +/- 3.5% RH | ** Absolute RH accuracy: +/- 3.5% RH | ||
== Audio == | |||
* uMP3 Playback Module [http://www.roguerobotics.com/products/electronics/ump3] | |||
== Data Logging == | |||
* uMMC Serial Data Module [http://www.roguerobotics.com/products/electronics/ummc] | |||
== Displays == | |||
* OLED 96x64 [http://www.adafruit.com/products/684] |
Latest revision as of 15:12, 14 June 2013
Microcontrollers[edit]
MSP430[edit]
BoosterPacks[edit]
Arduino[edit]
Shields[edit]
- Ethernet Shield
Sensors[edit]
Distance[edit]
- HC-SR04 [3]
Compass[edit]
GPS[edit]
- Parallax GpS Receiver [6]
Accelerometer[edit]
- Hitachi H48C 3-Axis Accelerometer Module [7]
- Measure 3 g on any axis
- Free-fall output indicates simultaneous 0g an all axes
- Small, breadboard-friendly package: 0.7" x 0.8" (17.8 mm x 20.3 mm)
- Wide operational range: -25 to 75 C
- Memsic 2125 Dual-Axis Accelerometer [8]
- Measure 0 to 2 g on either axis; less than 1 mg resolution
- Fully temperature compensated over 0 to 70 C range
- Simple, pulse output of g-force for X and Y axis
- Analog output of temperature (TOut pin)
- Low current operation: less than 4 mA at 5 vdc
Temperature[edit]
- SHT11 Temperature and Humidity Sensor Module [9]
- Temperature range: -40 F (-40 C) to +254.9 F (+123.8 C)
- Temp. accuracy: +/- 0.5 C @ 25 C<
- Humidity range: 0 to 100% RH
- Absolute RH accuracy: +/- 3.5% RH
Audio[edit]
- uMP3 Playback Module [10]
Data Logging[edit]
- uMMC Serial Data Module [11]
Displays[edit]
- OLED 96x64 [12]