Inexio

From Noisebridge
(Difference between revisions)
Jump to: navigation, search
(The Hardware)
(The Hardware)
 
(One intermediate revision by one user not shown)
Line 2: Line 2:
 
We acquired a bunch of [http://www.inexio.co.kr/ Inexio] 17" touchscreen LCD display panels.  This page documents what we've learned about them.
 
We acquired a bunch of [http://www.inexio.co.kr/ Inexio] 17" touchscreen LCD display panels.  This page documents what we've learned about them.
 
== The Hardware ==
 
== The Hardware ==
* VGA 17" panel
+
=== Display ===
* IR-based touchscreen connected to a custom touchscreen controller based on an Atmel AT91 ARM microcontroller
+
* VGA 17" panel, 1280x1024 @ 75 Hz according to EDID
 +
=== Touchscreen ===
 +
* IR-based touchscreen connected to a custom touchscreen controller ("C-CONTROLLER 2007.04.19 REV 4.94" silkscreened on PCB) based on an Atmel AT91SAM7S64 ARM microcontroller
 
* touchscreen data available as RS232 via DB9
 
* touchscreen data available as RS232 via DB9
 
* also apparently the same data is available as a USB CDC ACM device via the USB B-port hidden under the casing
 
* also apparently the same data is available as a USB CDC ACM device via the USB B-port hidden under the casing

Latest revision as of 00:58, 10 September 2009

Contents

[edit] The Gig

We acquired a bunch of Inexio 17" touchscreen LCD display panels. This page documents what we've learned about them.

[edit] The Hardware

[edit] Display

  • VGA 17" panel, 1280x1024 @ 75 Hz according to EDID

[edit] Touchscreen

  • IR-based touchscreen connected to a custom touchscreen controller ("C-CONTROLLER 2007.04.19 REV 4.94" silkscreened on PCB) based on an Atmel AT91SAM7S64 ARM microcontroller
  • touchscreen data available as RS232 via DB9
  • also apparently the same data is available as a USB CDC ACM device via the USB B-port hidden under the casing
    • however, the USB port doesn't seem to work -- it continually goes like so:
[20887.891836] usb 3-2: new full speed USB device using uhci_hcd and address 14
[20888.071162] usb 3-2: New USB device found, idVendor=1870, idProduct=0001
[20888.071174] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20888.071182] usb 3-2: Product: iNexio USB
[20888.071189] usb 3-2: Manufacturer: iNexio
[20888.071195] usb 3-2: SerialNumber: 100000000
[20888.071558] usb 3-2: configuration #1 chosen from 1 choice
[20955.608590] usb 3-2: USB disconnect, address 14
[20960.312903] usb 3-2: new full speed USB device using uhci_hcd and address 15
[20960.491975] usb 3-2: New USB device found, idVendor=1870, idProduct=0001
[20960.491986] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20960.491995] usb 3-2: Product: iNexio USB
[20960.492001] usb 3-2: Manufacturer: iNexio
[20960.492008] usb 3-2: SerialNumber: 100000000
[20960.492372] usb 3-2: configuration #1 chosen from 1 choice
[21028.029653] usb 3-2: USB disconnect, address 15
  • chips are running firmware v1.3, apparently v1.5 exists but is not trivial to find

[edit] The Software

[edit] Reverse Engineering the Protocol

to be filled in.

Personal tools