Editing Key Milling
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 104: | Line 104: | ||
By default, the script will do it in 1% increments by pass for quality. It will produce 10 passes per milled layer for a total of 100 layers. If your mill supports it, you can watch the comments in the GCode for producing a percentage progress. The process takes about 10 minutes and can likely be sped up by modifications to accurately use the bit's full size and remove a constant stream of metal instead of occasional tiny bits. | By default, the script will do it in 1% increments by pass for quality. It will produce 10 passes per milled layer for a total of 100 layers. If your mill supports it, you can watch the comments in the GCode for producing a percentage progress. The process takes about 10 minutes and can likely be sped up by modifications to accurately use the bit's full size and remove a constant stream of metal instead of occasional tiny bits. | ||