Label Printer

From Noisebridge
Revision as of 21:44, 1 March 2019 by Ruthgrace (talk | contribs)
Jump to navigation Jump to search

We have a Brother QL-700 label printer. Great for, say, printing lots of Noisebridge donor addresses to send them thank you post cards.

Label printer.png

Set up

  1. Download necessary software (drivers etc.): https://support.brother.com/g/b/downloadtop.aspx?c=eu_ot&lang=en&prod=lpql700euk . The P-touch Editor software will require the label printer's serial number, which is on the bottom of the device.
  2. Plug in the label printer to power, and to your computer via USB-B.
  3. To print your label, open P-touch Editor
  4. Hit the Paper button and make sure the correct printer and label size are selected.

Paper button: Label printer paper button.png The settings I have (for the DK-1201 1.1x3.5 inch address labels): Label printer paper settings.png

  1. Hit Print

Troubleshooting

I'm on a Mac, so your mileage may vary, but I've found that the little printer dialogue for the Brother QL-700 is pretty good about telling you what is wrong with the printer (like if the paper size you have selected in P-touch Editor is different from the one loaded in the printer).

This is the dialogue: Label printer dialogue mac.png

If you see this error when you hit the Print button, there's probably a more specific error in the dialogue. Label printer error.png