Laser Cutter/Kaitian CM1309

From Noisebridge
Revision as of 07:58, 4 July 2016 by Rubin110 (talk | contribs) (Specs)
Jump to: navigation, search
Kaitian CM1309

This page contains information about Noisebridge's Kaitian 100W laser. You might be looking for Full Spectrum Laser, our older laser cutter, or information about our gigabit laser uplink to the internet.

Some friends of Noisebridge from China have donate a really nice brand new, fully supported, laser cutter to Noisebridge!

In February of 2016 we were approached by Kaitlian, after Mitch gave them a tour of Noisebridge they offered us a new 100w laser cutter as a donation (with the stipulation of us taking care of shipping costs). As of July 1st 2016, we now have the laser in house. Please check out our action items to see what needs to happen next.

Current Action Items

  • Review what else needs to happen to get the laser installed and the area in the Sparkle Forge it sits in happy
  • Source some computer gear and a new monitor
    • Rubin has a plan for a pair of Intel NUCs (running Windows for reliability and Linux for hackability) and have it securly mounted to monitor
  • Start the process of documentation
    • Safety
    • Training
    • Materials
    • Donations for laser time and expendables
    • How to schedule time
    • How to actually use the damn thing
  • Discussion about ACL
  • Some work to better figure out the laser software
  • Fundraising for the remainder of the $4000 plus extra for expendables

Done Items

  • Get someone who knows enough about structural engineering to look at the place we want to use the laser cutter at Noisebridge, and let us know if the floor can handle the 1,000 pounds weight of the machine.
  • Raise $4,000 for shipping, import tax, and warranty maintenance charge. This will get the laser to us, and give us full support from Kaitian.
    • We've raised about $1500 so far
  • Build a room for it, with some sound insulation and ventilation that can handle the fumes.
    • The laser current lives in the Sparkle Forge.
  • Come up with a plan for the room, and raise funds for buildout of the room.



  • Laser: 100W
  • Working area: 1300mm × 900mm × 210mm / 51.1811in × 35.4331in × 8.26772in
  • Table size: 1360mm × 1080mm / 53.54331in × 42.51969in
  • Function: Engraving/Cutting
  • Workpiece maximum weight: 25kg / 55.1156lbs
  • Cutting speed (cm/min): ≤4800
  • Resolution ratio: 4000dpi


Exhaust Fan

  • 12 foot adjustable ventilation duct


Brochure for the Kaitian CM1309 laser cutter:


Pledge here for raising $6,000 buildout for our new laser cutter!

($4K for shipping, import tax, and warranty maintenance charge; $2K for direct room buildout)

Donations to the laser cutter project can be made here (also shows status of donations; currently <$2,500)

Donations are tax deductible