Laser Gallery: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
[[Image:Storage_box.jpg|thumb|center|upright=5|alt=Storage box|Storage box assembled without glue. Scotty: "Seems like .4mm kerf is the magic number in fusion 360 to get snug enough fit that you can hammer it together with a mallet"]] | |||
[[Image:Wood_springs.jpg|thumb|center|upright=5|alt=wood springs|Wood springs]] | |||
[[Image:Cardboard_laser_cutting_test_front.jpg|thumb|center|upright=5|alt=cardboard laser cutting test front side|Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed.]] | [[Image:Cardboard_laser_cutting_test_front.jpg|thumb|center|upright=5|alt=cardboard laser cutting test front side|Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed.]] | ||
[[Image:Cardboard_laser_cutting_test_back.jpg|thumb|center|upright=5|alt=cardboard laser cutting test back side|Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed. Note how the back is not cut through all the way on some tests. ]] | [[Image:Cardboard_laser_cutting_test_back.jpg|thumb|center|upright=5|alt=cardboard laser cutting test back side|Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed. Note how the back is not cut through all the way on some tests. ]] | ||