Difference between revisions of "Laser Gallery"
Jump to navigation
Jump to search
(Added files to mobile and box) |
|||
| Line 1: | Line 1: | ||
| − | [[Image:Cardboard_mobile.jpg|thumb|center|upright=5|alt=laser cut cardboard mobile|Laser cut cardboard Noisebridge mobiles]] | + | [[Image:Cardboard_mobile.jpg|thumb|center|upright=5|alt=laser cut cardboard mobile|Laser cut cardboard Noisebridge mobiles File: https://gist.github.com/scottyallen/1888e058261fc21f184f6be192bbe131 |
| − | [[Image:Storage_box.jpg|thumb|center|upright=5|alt=Storage box|Storage box assembled without glue. Scotty: "Seems like .4mm kerf is the magic number in fusion 360 to get snug enough fit that you can hammer it together with a mallet"]] | + | |400px]] |
| − | [[Image:Wood_springs.jpg|thumb|center|upright=5|alt=wood springs|Wood springs]] | + | [[Image:Storage_box.jpg|thumb|center|upright=5|alt=Storage box|Storage box assembled without glue. Scotty: "Seems like .4mm kerf is the magic number in fusion 360 to get snug enough fit that you can hammer it together with a mallet" File: https://gist.github.com/scottyallen/b244dc3fedcbf2862847adce4e4c9d2f|400px]] |
| − | [[Image:Cardboard_laser_cutting_test_front.jpg|thumb|center|upright=5|alt=cardboard laser cutting test front side|Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed.]] | + | |
| − | [[Image:Cardboard_laser_cutting_test_back.jpg|thumb|center|upright=5|alt=cardboard laser cutting test back side|Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed. Note how the back is not cut through all the way on some tests. ]] | + | [[Image:Wood_springs.jpg|thumb|center|upright=5|alt=wood springs|Wood springs|400px]] |
| + | [[Image:Cardboard_laser_cutting_test_front.jpg|thumb|center|upright=5|alt=cardboard laser cutting test front side|Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed.|400px]] | ||
| + | [[Image:Cardboard_laser_cutting_test_back.jpg|thumb|center|upright=5|alt=cardboard laser cutting test back side|Cardboard laser cutting test, front side. The top numbers are % power, and the numbers down the side are speed. Note how the back is not cut through all the way on some tests.|400px]] | ||
Revision as of 00:45, 8 August 2016
Laser cut cardboard Noisebridge mobiles File: https://gist.github.com/scottyallen/1888e058261fc21f184f6be192bbe131
Storage box assembled without glue. Scotty: "Seems like .4mm kerf is the magic number in fusion 360 to get snug enough fit that you can hammer it together with a mallet" File: https://gist.github.com/scottyallen/b244dc3fedcbf2862847adce4e4c9d2f
