Editing Laser cutter class
Jump to navigation
Jump to search
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.
Latest revision | Your text | ||
Line 281: | Line 281: | ||
[[File:Laser_cutter_class_part_3_23.jpg|200px]] [[File:Laser_cutter_class_part_3_24.jpg|200px]] | [[File:Laser_cutter_class_part_3_23.jpg|200px]] [[File:Laser_cutter_class_part_3_24.jpg|200px]] | ||
You can change the origin's relative position in the image, to set it to be the lower left, for instance, or the center, instead of the top right. You can also reset the origin to the top right if it's been left in a different position. To do this, we need to use RDWorks. Open the file parameters pane (Config > System Setting) and select the location you want to use for the origin. You can also use absolute coordinates, as well, in which case the position of the objects relative to the RDWorks work area matters. | You can change the origin's relative position in the image, to set it to be the lower left, for instance, or the center, instead of the top right. You can also reset the origin to the top right if it's been left in a different position. To do this, we need to use RDWorks. Open the file parameters pane (Config> System Setting) and select the location you want to use for the origin. You can also use absolute coordinates, as well, in which case the position of the objects relative to the RDWorks work area matters. | ||
[[File:Laser_cutter_class_part_3_25.PNG|200px]] | [[File:Laser_cutter_class_part_3_25.PNG|200px]] |