Laser Cutter/Full Spectrum Laser 40W: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
== Lasercutter (name to be determined) ==
== Lasercutter (name to be determined) ==
[[Lasercutter/V4 Full Spectrum Laser 40W]]
'''[[Lasercutter/V4 Full Spectrum Laser 40W|Full Spectrum Laser 4th Generation 40W CO2 Laser Engraver - Deluxe Model]]'''
 
'''Full Spectrum Laser 4th Generation 40W CO2 Laser Engraver - Deluxe Model'''


* [http://www.fullspectrumengineering.com/co2laserv2-40w.html Product Site]
* [http://www.fullspectrumengineering.com/co2laserv2-40w.html Product Site]
* [http://www.fullspectrumengineering.com/lasersetupv2.html V4 Laser Download Page]
* [http://www.fullspectrumengineering.com/lasersetupv2.html V4 Laser Download Page]
* [http://www.fullspectrumengineering.com/files/FSL_40w_Hobby_Laser_Manual.pdf Manual]
* [http://www.fullspectrumengineering.com/files/FSL_40w_Hobby_Laser_Manual.pdf Manual]
* [
* Drivers should be thrown onto Pony and the cutter machine once we get that setup.


== Safety information and training ==
We should have a bunch of helpful information here on safe operation of the device and who to go to to be trained on its use here.


== Software ==
== Software ==
https://github.com/Metalab/ctrl-cut
=== RetinaEngrave (Windows) ===
 
=== [https://github.com/Metalab/ctrl-cut ctrl-cut] ===
Amir Hassan and Marius Kintel are working on open source laser cutter drivers through the CUPS interface. Primarily they're working on getting it operational with an Epilog cutter, but would like to expand past that soon.


== [[Talk:Lasercutter|Discussion]] ==
== [[Talk:Lasercutter|Discussion]] ==
'''[[Talk:Lasercutter|On the Discussion page!]]'''
'''[[Talk:Lasercutter|On the Discussion page!]]'''

Revision as of 19:31, 24 February 2011

Lasercutter (name to be determined)

Full Spectrum Laser 4th Generation 40W CO2 Laser Engraver - Deluxe Model

Safety information and training

We should have a bunch of helpful information here on safe operation of the device and who to go to to be trained on its use here.

Software

RetinaEngrave (Windows)

ctrl-cut

Amir Hassan and Marius Kintel are working on open source laser cutter drivers through the CUPS interface. Primarily they're working on getting it operational with an Epilog cutter, but would like to expand past that soon.

Discussion

On the Discussion page!