Editing
Meeting Notes 2014 11 04
(section)
Jump to navigation
Jump to search
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
== 3D printing == * Marcel - If we get a reliable 3d printer, or if we keep on w/ the OSS stuff, it'd be great to see it as a tool that we can all use. We have a slack group for keeping everyone up to date. I want to ask what we're going to do if we get professional equipment, will we keep hacking? * Torrie - I've ordered a RAMBO board to replace teh old stuff. I couldn't get the old stuff to work earlier in the week. Something seemed wrong w/ the RAMPS board but couldn't get it figured out. The RAMBO is coming. I also put Fedora on the computer over there to make it user friendly for everyone to come in and use it. If things aren't there then let me know and I'll fix it. * Steve - * Henner - I don't think that you can distuingish between "pro" and "hacker" 3d equipment. It requires some work but both work as well as each other. Secondly at the moment: Milo, who works in the industry doesn't want to leave stuff here for fear that it'll be broken. We should work to remove this fear and show people that it's safe. We should make this machine here work and show that we have things that are being cared for in the space, that there are folks that are protecting it from noise in the space. It's better than something complete and bought brought in. * Rayc - I might have broken the machine. There could have been a malfunction w/ the separate RAMPS board that might have caused issues. If I broke it I take full responsibility. The 3D table used to be one of the 1st thing you'd see entering the space and it was very popular with people coming into the space. We've moved it around the space since then. But without support from knowledgeable individuals people tinker with them and they break. I worked on the original setup w/ makerbots where we had 4 running concurrently. I'd like to see signage, guides, disclaimers asking you to contact people before you use them. Making the space more user friendly. * Marcel - I didn't document everything at the time, mea culpa. We installed octoprint and all the neccessary software but I was waiting for the DNS stuff to get done. If I can put more information on the wiki or Slack I will. I think it's excellent to have more equipment and other things in the space, to have more 3d printer stuff in the space, especially an OSS model. It's a tool that's important for the space to have. * Torrie - My approach to getting more neat stuff in the space / getting things working is usually throwing shit at the wall to see what sticks. There are a number of people involved with the space that want printers working, it's a matter of getting these people involved so that it's not all on one person. We need more people involved. * Marcel - I think Torrie's on point. I don't feel that I own it, I just want to contribute. * Rayc - As the community grows so to does our tolerance and understanding of each other. By taking on 3d printing in the space people do look up to you in the space. That's a side-effect of taking on problems in the space. * Marcel - Want to know if we need more documentation / what other results? * Henner - More docs == good. I'd put a sheet beside the item {3dprinter, lasercutter} with some DOs and DONTs. If you don't want to do the documentation there are others in the community that want to help w/ documenting things in the space. It's important that while building community that we have people that care about things. That we have people that make sure that things work in the future and protect the machine from bad actors. * Rayc - There is a Documentation Working Group that you should ping because they're hacking docs. * John - The mailing list and slack are great forms of communication for something like this, especially because it's a push form for notifying people.
Summary:
Please note that all contributions to Noisebridge are considered to be released under the Creative Commons Attribution-NonCommercial-ShareAlike (see
Noisebridge:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted work without permission!
To protect the wiki against automated edit spam, we kindly ask you to solve the following CAPTCHA:
Cancel
Editing help
(opens in new window)
Navigation menu
Personal tools
Not logged in
Talk
Contributions
Log in
Request account
Namespaces
Page
Discussion
English
Views
Read
Edit
View history
More
Search
Dig in!
Noisebridge
- Status: MOVED
- Donate
- ABOUT
- Accessibility
- Vision
- Blog
Manual
MANUAL
Visitors
Participation
Community Standards
Channels
Operations
Events
EVENTS
Guilds
GUILDS
- Meta
- Electronics
- Fabrication
- Games
- Music
- Library
- Neuro
- Philosophy
- Funding
- Art
- Crypto
- Documentation/Wiki
Wiki
Recent Changes
Random Page
Help
Categories
(Edit)
Tools
What links here
Related changes
Special pages
Page information