Difference between revisions of "Miter saw"

From Noisebridge
Jump to: navigation, search
m (nburl)
Line 13: Line 13:
 
* You should use the shop-vac to clean up after yourself, even if you only cut one thing.
 
* You should use the shop-vac to clean up after yourself, even if you only cut one thing.
  
[[Category:Pages with a Noisebridge Tiny URL]]
+
[[Category:Pages with a Noisebridge Tiny URL]]<gallery mode="packed-hover">
 +
File:Ct3-06.jpg|''[[commons:Psetta maxima|Psetta maxima]]'' (Turbot)
 +
File:044.jpg|''[[commons:Psetta maxima|Psetta maxima]]'' (Turbot)
 +
File:045.jpg|''[[commons:Psetta maxima|Psetta maxima]]'' (Turbot)
 +
File:046.jpg|''[[commons:Psetta maxima|Psetta maxima]]'' (Turbot)
 +
File:047.jpg|''[[commons:Psetta maxima|Psetta maxima]]'' (Turbot)
 +
File:048.jpg|''[[commons:Psetta maxima|Psetta maxima]]'' (Turbot)
 +
</gallery>

Revision as of 00:14, 6 May 2014

TODO: Improve instructions and safety tips for using the Miter Saw.

The good

We have a miter saw. It is fast, efficient, and accurate. You could use it to make something!

The bad

  • It is extremely easy to cut your human fingers off using this saw. Don't reach in until the saw has stopped moving. It only takes 10 seconds to come to a complete stop, and a trip to the ER will take you 10 hours. Slow down. What are you rushing for, anyways?
  • It has a wood blade in it. Don't use it to cut metal.
  • There was a blade-brake that would stop the blade when the saw reached the top, but that has been flaky. Repairing it is almost certainly more trouble than it's worth.

The ugly