Difference between revisions of "Mono-4"

From Noisebridge
Jump to: navigation, search
Line 1: Line 1:
 
[[File:Mono4.JPG|200px]]
 
[[File:Mono4.JPG|200px]]
 +
 +
5/26/2019
 +
* Sucessfully printing PLA using a SD card. Ordered a new small slow speed sd card which the printer can read.  I had tried to use cards from pi projects but they are big high speed ones and I read the mono price minis have trouble with those.
 +
 
5/22/2019
 
5/22/2019
 
* The last functioning Monoprice mini at NB. Have seen someone printing over a usb cable, but failed to get it to function.  Needs compatible micro sd cards.
 
* The last functioning Monoprice mini at NB. Have seen someone printing over a usb cable, but failed to get it to function.  Needs compatible micro sd cards.

Revision as of 23:26, 26 May 2019

Mono4.JPG

5/26/2019

  • Sucessfully printing PLA using a SD card. Ordered a new small slow speed sd card which the printer can read. I had tried to use cards from pi projects but they are big high speed ones and I read the mono price minis have trouble with those.

5/22/2019

  • The last functioning Monoprice mini at NB. Have seen someone printing over a usb cable, but failed to get it to function. Needs compatible micro sd cards.

6/30/2017

  • A roll of Green Hatchbox PLA got replaced but it doesn't seem to be feeding down to the extruder.