Mono-4

From Noisebridge
Revision as of 23:39, 9 June 2019 by Redfern314 (talk | contribs)
Jump to: navigation, search

Mono4.JPG

6/9/2019

  • Heated bed sometimes loses connection; shifting the bed forwards or backwards fixes it temporarily. May be experiencing this issue, please check if you take the bed off

5/26/2019

  • Sucessfully printing PLA using a SD card. Ordered a new small slow speed sd card which the printer can read. I had tried to use cards from pi projects but they are big high speed ones and I read the mono price minis have trouble with those.

5/22/2019

  • The last functioning Monoprice mini at NB. Have seen someone printing over a usb cable, but failed to get it to function. Needs compatible micro sd cards.

6/30/2017

  • A roll of Green Hatchbox PLA got replaced but it doesn't seem to be feeding down to the extruder.