NGALAC/Manual

From Noisebridge
Revision as of 06:21, 17 November 2018 by Jarrod (talk | contribs) (Livestreaming and OBS)
Jump to: navigation, search

Left

Power On/Off =

The current process of turning NGALAC on and off is to connect or disconnect the power cable from the wall outlet. Everything inside NGALAC should be setup to turn on automatically. Once power is connected the raspberri Pi should load retropi for the games and the PC should load windows and start OBS.

  • Known Issues:
Ngalac-internalpowerswitch.JPG
    • The interior power switch might have been turned off. To access it, open the lower rear panel and look in the lower "Stage Right" corner. for the bottom of the large grey power strip. When there is power to the strip, there should be a red LED light shining



Select and Play Games

Left


  • Known Issues:

Current control setup


-

     6 2		      5 1
r      i q   		 ▲      u z  

d g j k w a ◄ ► y m x c

f    l     s		 ▼    n     v


Livestreaming and OBS

OBS Studio ( https://obsproject.com/ ) is used to collect all of the sources from NGALAC and send them to Twitch/Youtube.

  • Known Issues:
    • You will only see the chat from twitch.
    • OBS is set to start up full screen but this often doesn't work, you can set it to fullscreen by