Lunetta Synthesis: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
m (Mcint moved page Lunetta Synthesizer to Lunetta Synthesis: Imprecise naming)
 
(10 intermediate revisions by 3 users not shown)
Line 22: Line 22:


=== Parts ===
=== Parts ===
CD40106 Hex Schmitt. 6 oscillators on a single chip!
CD40106 Hex Schmitt.  
http://live.partlist.org/331/image/item/open/root/format=big
* 6 oscillators on a single chip!  
 
* Wide voltage supply (3V-15V), so you can drive with various batteries.
* http://live.partlist.org/331/image/item/open/root/format=big


=== Variations and Tips ===
=== Variations and Tips ===
Line 44: Line 45:


==== Amplification ====
==== Amplification ====
Use a cheap 3W PAM amplifier module to drive a speaker. Overdrive the powersupply of the PAM with a 9V battery for extra volume (but check for heat).
Use a cheap 3W '''PAM8403''' amplifier module to drive a speaker.  
* Make use of the PAM's stereo channels.
* Overdrive the power supply of the PAM with a 9V battery for extra volume (but check the PAM chip for heat).
* https://www.ebay.com/itm/162965060047


==General Lunetta Synthesis Links==
==General Lunetta Synthesis Links==

Latest revision as of 17:47, 23 December 2023

Intro[edit]

A page dedicated to Lunetta Synthesis, the art of repurposing and perverting digital logic semiconductor chips into sound-producing devices. The techniques of Lunetta Synthesis were pioneered by sculptor and percussionist Stanley Lunetta in the 1970's.

In 2014, Noisebridge was honored to host a talk and demonstration by Stanley Lunetta himself.

Stanley3.jpgStanley2.jpg

https://www.noisebridge.net/wiki/NoiseHack

This page is a work-in-progress. Feel free to add more info and links, but please try to keep it organized.

General Tips[edit]

  • For visual fun, use LED's wherever a schematic calls for diodes.
  • For light-activated control, substitute photoresistors for resistors. Or, use a mercury switch like Stanley did in his gun-shaped device, in the photo above :)

Lunetta Oscillator[edit]

The Lunetta Oscillator is the heart of Lunetta Synthesis. It's an oscillator based on a Schmitt Inverter.

Schmitt-osc1.gif

Schmitt.gif

Parts[edit]

CD40106 Hex Schmitt.

Variations and Tips[edit]

Intermodulation[edit]

Drive one Schmitt oscillator with another, through a diode, and using a switch as a trigger:

https://hackadaycom.files.wordpress.com/2015/01/40106_sync_osc.png?w=800&h=326

Gentle Sounds[edit]

Most Lunetta syntesizers out there are raucous and chaotic. But sweet, gentle sounds are also possible.

  • Tap the inverter output to obtain a loud, buzzy, digital square wave.
  • Tap the inverter input to obtain a gentle, soft, analog triangular-ish wave. That's the voltage presented by the capacitor as it charges/discharges.

7414-oscillator-waveform-diagram.png

Starvation[edit]

Starve or overdrive the power supply to the chip for unexpected results.

Amplification[edit]

Use a cheap 3W PAM8403 amplifier module to drive a speaker.

General Lunetta Synthesis Links[edit]


Page created by: Johnyradio (talk) 12:49, 19 May 2018 (UTC)