Difference between revisions of "Noisebridge:Lunetta"

From Noisebridge
Jump to: navigation, search
Line 22: Line 22:
=== Parts ===
=== Parts ===
CD40106 Hex Schmitt. 6 oscillators on a single chip!
CD40106 Hex Schmitt.  
* 6 oscillators on a single chip!  
* Wide voltage supply (3V-15V), so you can drive with various batteries.
* http://live.partlist.org/331/image/item/open/root/format=big
=== Variations and Tips ===
=== Variations and Tips ===

Revision as of 13:55, 19 May 2018


A page dedicated to Lunetta Synthesis, the art of repurposing and perverting digital logic semiconductor chips into sound-producing devices. The techniques of Lunetta Synthesis were pioneered by sculptor and percussionist Stanley Lunetta in the 1970's.

In 2014, Noisebridge was honored to host a talk and demonstration by Stanley Lunetta himself.



This page is a work-in-progress. Feel free to add more info and links, but please try to keep it organized.

General Tips

  • For visual fun, use LED's wherever a schematic calls for diodes.
  • For light-activated control, substitute photoresistors for resistors. Or, use a mercury switch like Stanley did in his gun-shaped device, in the photo above :)

Lunetta Oscillator

The Lunetta Oscillator is the heart of Lunetta Synthesis. It's an oscillator based on a Schmitt Inverter.




CD40106 Hex Schmitt.

Variations and Tips


Drive one Schmitt oscillator with another, through a diode, and using a switch as a trigger:


Gentle Sounds

Most Lunetta syntesizers out there are raucous and chaotic. But sweet, gentle sounds are also possible.

  • Tap the inverter output to obtain a loud, buzzy, digital square wave.
  • Tap the inverter input to obtain a gentle, soft, analog triangular-ish wave. That's the voltage presented by the capacitor as it charges/discharges.



Starve or overdrive the power supply to the chip for unexpected results.


Use a cheap 3W PAM8403 amplifier module to drive a speaker.

General Lunetta Synthesis Links

Page created by: Johnyradio (talk) 12:49, 19 May 2018 (UTC)