Noisedroid/FAQ

From Noisebridge
< Noisedroid
Revision as of 08:51, 16 March 2009 by Adi (Talk | contribs)

Jump to: navigation, search

Building

<project path="kernel" name="kernel/msm" revision="refs/heads/android-msm-2.6.27"/>
    • this results in a build using a prebuilt kernel and wlan.ko from vendor/htc/dream/.
  • after make completes you'll have a built tree in out/target/product/dream, and you can run
# fastboot flash boot boot.img
# fastboot flash system system.img
  • to build your own kernel and wlan.ko, do:
cd mydroid
d=$PWD
cd kernel
make ARCH=arm CROSS_COMPILE=$d/prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi- msm_defconfig
make ARCH=arm CROSS_COMPILE=$d/prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi-
cd $d/system/wlan/ti
PATH=$d/prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin:$PATH make KERNEL_DIR=$d/kernel
cd $d
cp kernel/arch/arm/boot/zImage out/target/product/dream/kernel
cp system/wlan/ti/sta_dk_4_0_4_32/wlan.ko out/target/product/dream/system/lib/modules/wlan.ko
rm out/target/product/dream/*.img
make

Working with the G1

There are two significant host apps for (ab)using the G1: fastboot and adb. Fastboot is used to write over USB to the G1's flash, for example to flash a complete system.img or replace the T-Mobile splash screen. adb gives you access to a debug root shell on the G1 with adb shell, and also "syslog" with adb logcat.

Personal tools