PID Tuning: Difference between revisions
Jump to navigation
Jump to search
m (→PID Tuning) |
|||
Line 1: | Line 1: | ||
I've only done this on Noisebridge's Ender 3's, but it should work on any printer | I've only done this on Noisebridge's Ender 3's, but it should work on any printer | ||
Latest revision as of 10:41, 23 April 2023
I've only done this on Noisebridge's Ender 3's, but it should work on any printer
- Download and open Pronterface Printrun
- Connect your computer to the printer over serial interface (plug-in next to SD card slot)
- In the top left, select port and Baud Rate. Here, you can see the Baud Rate set to 250000.
- Type the following
M106 S255
M303 E0 S200 C10
- this will return some values that you will want to record for the next step
M301 P(insert value) I(insert value) D(insert value)
M500
M503
- This outputs the configuration of the printer. Make sure the row with the PID values matches what you put in step (4.)