Difference between revisions of "Plotter"

From Noisebridge
Jump to: navigation, search
(minor edits, adding in photo links)
Line 8: Line 8:
 
* comes with one pen holder (holding a #2 pencil, nach)
 
* comes with one pen holder (holding a #2 pencil, nach)
 
* has a DB-25 that probably wants to speak HP-GL over RS-232
 
* has a DB-25 that probably wants to speak HP-GL over RS-232
 +
==Carousel setup==
 +
[[Image:5763566793_8c8251d19f_o.jpg#file|plotter carousel pencap retracted|200px]]
 +
[[Image:5763999946 7604492d97 o.jpg#file|plotter carousel pencapped | 200px]]
  
We need:
+
 
 +
==We need:==
 
* service manuals
 
* service manuals
 
* pen holders
 
* pen holders
Line 40: Line 44:
 
CI25;
 
CI25;
 
</PRE>
 
</PRE>
 
+
=Use It=
 
Settings:
 
Settings:
 
* Your program needs to use DOS line endings (\r\n)
 
* Your program needs to use DOS line endings (\r\n)

Revision as of 05:37, 27 May 2011

On December 20, 2009, someone (who?) donated a beautiful HP DraftMaster I pen plotter (HP P/N 7595A).

There's a Flickr set of somebody else's DraftMaster for reference.

Our plotter:

  • appears to be in good physical condition
  • comes with a pen carousel
  • comes with one pen holder (holding a #2 pencil, nach)
  • has a DB-25 that probably wants to speak HP-GL over RS-232

Carousel setup

plotter carousel pencap retracted plotter carousel pencapped


We need:

  • service manuals
  • pen holders
  • paper
  • software that emits HPGL
  • a paper holder (probably a wire cage) to catch the print as it finishes

Documentation:

HPGL Software:

Pens:

Wikipedia: Plotter, HPGL


Program that seems to work:

IN;
SC0,40,0,40;
SP7;
PU0,0;
PD100,0,100,100,0,100,0,0;
PU50,50;
CI25;

Use It

Settings:

  • Your program needs to use DOS line endings (\r\n)
  • Serial is 9600 8N1 on the PC side, plugged into the COMPUTER/MODEM port via a null modem cable
  • SERIAL:
    • DATAFLOW: REMOTE, STANDALONE
    • PARITY: 1
    • BAUD: 9600
    • HARDWIRE: OFF

Using Inkscape:

  • Load (or create) your vector graphic in Inkscape
  • Prepare the image for printing:
  • Scale the image (Inkscape mm units appear to work correctly)
  • Flip the image horizontally (for some reason, the plotter is printing it backwards)
  • Select 'save as', then 'HP Graphics Language'.
  • Open this file in a text editor, and copy the text
  • Paste the file into your terminal program, configured as above (CoolTerm in OS/X or Minicom in Linux)
  • Enjoy your plot!

Example:

[Plotted Noisebridge Logo] HPGL for NoiseBridge Logo