Difference between revisions of "Pony/dmesg"

From Noisebridge
Jump to: navigation, search
(New page: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc versi...)
 
(Replaced content with '(out of date) -- see the real pony's dmesg for better details.')
 
Line 1: Line 1:
[    0.000000] Initializing cgroup subsys cpuset
+
(out of date) -- see the real pony's dmesg for better details.
[    0.000000] Initializing cgroup subsys cpu
 
[    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
 
[    0.000000] BIOS-provided physical RAM map:
 
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000099400 (usable)
 
[    0.000000]  BIOS-e820: 0000000000099400 - 00000000000a0000 (reserved)
 
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006fee0000 (usable)
 
[    0.000000]  BIOS-e820: 000000006fee0000 - 000000006fee3000 (ACPI NVS)
 
[    0.000000]  BIOS-e820: 000000006fee3000 - 000000006fef0000 (ACPI data)
 
[    0.000000]  BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved)
 
[    0.000000]  BIOS-e820: 0000000070000000 - 0000000080000000 (reserved)
 
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 
[    0.000000] 894MB HIGHMEM available.
 
[    0.000000] 896MB LOWMEM available.
 
[    0.000000] found SMP MP-table at [c00f56f0] 000f56f0
 
[    0.000000] Entering add_active_range(0, 0, 458464) 0 entries of 256 used
 
[    0.000000] Zone PFN ranges:
 
[    0.000000]  DMA            0 ->    4096
 
[    0.000000]  Normal      4096 ->  229376
 
[    0.000000]  HighMem    229376 ->  458464
 
[    0.000000] Movable zone start PFN for each node
 
[    0.000000] early_node_map[1] active PFN ranges
 
[    0.000000]    0:        0 ->  458464
 
[    0.000000] On node 0 totalpages: 458464
 
[    0.000000]  DMA zone: 32 pages used for memmap
 
[    0.000000]  DMA zone: 0 pages reserved
 
[    0.000000]  DMA zone: 4064 pages, LIFO batch:0
 
[    0.000000]  Normal zone: 1760 pages used for memmap
 
[    0.000000]  Normal zone: 223520 pages, LIFO batch:31
 
[    0.000000]  HighMem zone: 1790 pages used for memmap
 
[    0.000000]  HighMem zone: 227298 pages, LIFO batch:31
 
[    0.000000]  Movable zone: 0 pages used for memmap
 
[    0.000000] DMI 2.5 present.
 
[    0.000000] ACPI: RSDP 000F7280, 0024 (r2 Nvidia)
 
[    0.000000] ACPI: XSDT 6FEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
 
[    0.000000] ACPI: FACP 6FEED400, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
 
[    0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080321]
 
[    0.000000] ACPI: DSDT 6FEE3280, A113 (r1 NVIDIA ASUSACPI    1000 MSFT  3000000)
 
[    0.000000] ACPI: FACS 6FEE0A80, 0040
 
[    0.000000] ACPI: SSDT 6FEED640, 0616 (r1 PTLTD  POWERNOW        1  LTP        1)
 
[    0.000000] ACPI: HPET 6FEEDCC0, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD      98)
 
[    0.000000] ACPI: MCFG 6FEEDD40, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
 
[    0.000000] ACPI: APIC 6FEED540, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
 
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
 
[    0.000000] ACPI: Local APIC address 0xfee00000
 
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
 
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
 
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
 
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
 
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
 
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
 
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
 
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
 
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
 
[    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
 
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
 
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
 
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
 
[    0.000000] ACPI: IRQ0 used by override.
 
[    0.000000] ACPI: IRQ2 used by override.
 
[    0.000000] ACPI: IRQ9 used by override.
 
[    0.000000] ACPI: IRQ14 used by override.
 
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
 
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
 
[    0.000000] Using ACPI (MADT) for SMP configuration information
 
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
 
[    0.000000] PM: Registered nosave memory: 0000000000099000 - 000000000009a000
 
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
 
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
 
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
 
[    0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
 
[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
 
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 4
 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 454882
 
[    0.000000] Kernel command line: root=/dev/sda5 ro
 
[    0.000000] mapped APIC to ffffb000 (fee00000)
 
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
 
[    0.000000] Enabling fast FPU save and restore... done.
 
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
 
[    0.000000] Initializing CPU#0
 
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
 
[    0.000000] Extended CMOS year: 2000
 
[    0.000000] Detected 2099.997 MHz processor.
 
[    0.004000] spurious 8259A interrupt: IRQ7.
 
[    0.004000] Console: colour VGA+ 80x25
 
[    0.004000] console [tty0] enabled
 
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
 
[    0.004000] Memory: 1807948k/1833856k available (1769k kernel code, 24600k reserved, 752k data, 244k init, 916352k highmem)
 
[    0.004000] virtual kernel memory layout:
 
[    0.004000]    fixmap  : 0xfff4c000 - 0xfffff000  ( 716 kB)
 
[    0.004000]    pkmap  : 0xff800000 - 0xffc00000  (4096 kB)
 
[    0.004000]    vmalloc : 0xf8800000 - 0xff7fe000  ( 111 MB)
 
[    0.004000]    lowmem  : 0xc0000000 - 0xf8000000  ( 896 MB)
 
[    0.004000]      .init : 0xc037f000 - 0xc03bc000  ( 244 kB)
 
[    0.004000]      .data : 0xc02ba4ab - 0xc0376620  ( 752 kB)
 
[    0.004000]      .text : 0xc0100000 - 0xc02ba4ab  (1769 kB)
 
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
 
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
 
[    0.004000] hpet clockevent registered
 
[    0.083901] Calibrating delay using timer specific routine.. 4204.51 BogoMIPS (lpj=8409038)
 
[    0.084005] Security Framework initialized
 
[    0.084005] SELinux:  Disabled at boot.
 
[    0.084005] Capability LSM initialized
 
[    0.084005] Mount-cache hash table entries: 512
 
[    0.084005] Initializing cgroup subsys ns
 
[    0.084005] Initializing cgroup subsys cpuacct
 
[    0.084005] Initializing cgroup subsys devices
 
[    0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 
[    0.084005] CPU: L2 Cache: 512K (64 bytes/line)
 
[    0.084005] CPU 0(3) -> Core 0
 
[    0.084005] Intel machine check architecture supported.
 
[    0.084005] Intel machine check reporting enabled on CPU#0.
 
[    0.084005] Checking 'hlt' instruction... OK.
 
[    0.100006] ACPI: Core revision 20080321
 
[    0.116007] ENABLING IO-APIC IRQs
 
[    0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
 
[    0.155739] CPU0: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
 
[    0.155975] Booting processor 1/1 ip 6000
 
[    0.164010] Initializing CPU#1
 
[    0.164010] Calibrating delay using timer specific routine.. 4200.66 BogoMIPS (lpj=8401324)
 
[    0.164010] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 
[    0.164010] CPU: L2 Cache: 512K (64 bytes/line)
 
[    0.164010] CPU 1(3) -> Core 1
 
[    0.164010] AMD C1E detected late.  Force timer broadcast.
 
[    0.164010] Intel machine check architecture supported.
 
[    0.164010] Intel machine check reporting enabled on CPU#1.
 
[    0.244015] CPU1: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
 
[    0.244015] Booting processor 2/2 ip 6000
 
[    0.252015] Initializing CPU#2
 
[    0.252015] Calibrating delay using timer specific routine.. 4200.51 BogoMIPS (lpj=8401024)
 
[    0.252015] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
 
[    0.252015] CPU: L2 Cache: 512K (64 bytes/line)
 
[    0.252015] CPU 2(3) -> Core 2
 
[    0.252015] AMD C1E detected late.  Force timer broadcast.
 
[    0.252015] Intel machine check architecture supported.
 
[    0.252015] Intel machine check reporting enabled on CPU#2.
 
[    0.335194] CPU2: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
 
[    0.335750] Brought up 3 CPUs
 
[    0.335802] Total of 3 processors activated (12605.69 BogoMIPS).
 
[    0.335891] CPU0 attaching sched-domain:
 
[    0.335893]  domain 0: span 0-2
 
[    0.335895]  groups: 0 1 2
 
[    0.335899] CPU1 attaching sched-domain:
 
[    0.335901]  domain 0: span 0-2
 
[    0.335903]  groups: 1 2 0
 
[    0.335906] CPU2 attaching sched-domain:
 
[    0.335908]  domain 0: span 0-2
 
[    0.335909]  groups: 2 0 1
 
[    0.336021] net_namespace: 660 bytes
 
[    0.336021] Booting paravirtualized kernel on bare hardware
 
[    0.336021] NET: Registered protocol family 16
 
[    0.336021] ACPI: bus type pci registered
 
[    0.336021] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
 
[    0.336021] PCI: MCFG area at f0000000 reserved in E820
 
[    0.336021] PCI: Using MMCONFIG for extended config space
 
[    0.336021] PCI: Using configuration type 1 for base access
 
[    0.336021] Setting up standard PCI resources
 
[    0.347224] ACPI: EC: Look up EC in DSDT
 
[    0.364057] ACPI: Interpreter enabled
 
[    0.364057] ACPI: (supports S0 S1 S3 S4 S5)
 
[    0.364273] ACPI: Using IOAPIC for interrupt routing
 
[    0.395073] ACPI: PCI Root Bridge [PCI0] (0000:00)
 
[    0.396630] PCI: Transparent bridge - 0000:00:08.0
 
[    0.397185] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
 
[    0.397765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
 
[    0.626603] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
 
[    0.627200] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.627860] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.628520] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
 
[    0.629104] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.629760] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.630418] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.631071] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.631727] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15)
 
[    0.632318] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.632972] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15)
 
[    0.633557] ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15)
 
[    0.634140] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.634794] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.635450] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.636107] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.636765] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.637425] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.638077] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.638733] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.639387] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 *10 11 14 15)
 
[    0.639971] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.640652] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.643302] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.643956] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.644618] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.645277] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.645933] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.646586] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.647239] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.647896] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.648563] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.649219] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.649881] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.650537] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.651191] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.651850] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.652517] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
 
[    0.653101] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.653757] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.654410] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.655063] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.655724] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
 
[    0.656322] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.656977] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
 
[    0.657561] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.658215] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
 
[    0.658871] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
 
[    0.659493] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
 
[    0.659978] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
 
[    0.660498] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
 
[    0.661012] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
 
[    0.661491] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
 
[    0.662003] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
 
[    0.662515] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
 
[    0.663024] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
 
[    0.663534] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0
 
[    0.664020] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
 
[    0.664541] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0
 
[    0.665021] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0
 
[    0.665504] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
 
[    0.666016] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
 
[    0.666526] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
 
[    0.667038] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
 
[    0.667543] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
 
[    0.668055] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
 
[    0.668591] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
 
[    0.669101] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
 
[    0.669613] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
 
[    0.670096] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
 
[    0.670609] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
 
[    0.671122] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
 
[    0.671632] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
 
[    0.672141] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
 
[    0.672657] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
 
[    0.673169] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
 
[    0.673683] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
 
[    0.674193] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
 
[    0.674702] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
 
[    0.675215] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
 
[    0.675731] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
 
[    0.676244] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
 
[    0.676762] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
 
[    0.677271] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
 
[    0.677783] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
 
[    0.678347] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
 
[    0.678943] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
 
[    0.679533] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
 
[    0.680126] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
 
[    0.680730] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
 
[    0.681296] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
 
[    0.681858] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
 
[    0.682457] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
 
[    0.683056] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
 
[    0.683652] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
 
[    0.684245] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
 
[    0.688283] Linux Plug and Play Support v0.97 (c) Adam Belay
 
[    0.688283] pnp: PnP ACPI init
 
[    0.688283] ACPI: bus type pnp registered
 
[    0.698545] pnp: PnP ACPI: found 11 devices
 
[    0.698545] ACPI: ACPI bus type pnp unregistered
 
[    0.698600] PnPBIOS: Disabled by ACPI PNP
 
[    0.702545] PCI: Using ACPI for IRQ routing
 
[    0.710496] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
 
[    0.710545] hpet0: 3 32-bit timers, 25000000 Hz
 
[    0.710545] ACPI: RTC can wake from S4
 
[    0.713159] Clockevents: could not switch to one-shot mode: lapic is not functional.
 
[    0.713264] Could not switch to high resolution mode on CPU 0
 
[    0.713355] system 00:01: ioport range 0x1000-0x107f has been reserved
 
[    0.713416] system 00:01: ioport range 0x1080-0x10ff has been reserved
 
[    0.713476] system 00:01: ioport range 0x1400-0x147f has been reserved
 
[    0.713535] system 00:01: ioport range 0x1480-0x14ff has been reserved
 
[    0.713590] system 00:01: ioport range 0x1800-0x187f has been reserved
 
[    0.713650] system 00:01: ioport range 0x1880-0x18ff has been reserved
 
[    0.713712] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
 
[    0.713779] system 00:01: iomem range 0x70000000-0x7fffffff could not be reserved
 
[    0.713857] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
 
[    0.713909] system 00:02: ioport range 0x800-0x87f has been reserved
 
[    0.713962] system 00:02: ioport range 0x290-0x297 has been reserved
 
[    0.714035] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
 
[    0.714113] system 00:0a: iomem range 0xdf000-0xdffff has been reserved
 
[    0.714173] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
 
[    0.714233] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
 
[    0.714286] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
 
[    0.714352] system 00:0a: iomem range 0xfeff0000-0xfeff00ff could not be reserved
 
[    0.714419] system 00:0a: iomem range 0x6fee0000-0x6fefffff could not be reserved
 
[    0.714498] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0x100000-0x6fedffff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0x6fff0000-0x7ffeffff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0xfefff000-0xfeffffff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0xfff80000-0xfff80fff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0xfff90000-0xfffbffff could not be reserved
 
[    0.714551] system 00:0a: iomem range 0xfffed000-0xfffeffff could not be reserved
 
[    0.722056] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
 
[    0.724586] Could not switch to high resolution mode on CPU 1
 
[    0.722056]  lapic is not functional.
 
[    0.722056] Could not switch to high resolution mode on CPU 2
 
[    0.752581] PCI: Bridge: 0000:00:08.0
 
[    0.752637]  IO window: c000-cfff
 
[    0.752693]  MEM window: 0xfde00000-0xfdefffff
 
[    0.752743]  PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
 
[    0.752804] PCI: Bridge: 0000:00:0b.0
 
[    0.752852]  IO window: b000-bfff
 
[    0.752906]  MEM window: 0xfb000000-0xfcffffff
 
[    0.752955]  PREFETCH window: 0x00000000d8000000-0x00000000e7ffffff
 
[    0.753014] PCI: Bridge: 0000:00:10.0
 
[    0.753064]  IO window: a000-afff
 
[    0.753123]  MEM window: 0xfdc00000-0xfdcfffff
 
[    0.753180]  PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
 
[    0.753246] PCI: Bridge: 0000:00:12.0
 
[    0.753300]  IO window: 9000-9fff
 
[    0.753354]  MEM window: 0xfda00000-0xfdafffff
 
[    0.753412]  PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff
 
[    0.753476] PCI: Bridge: 0000:00:13.0
 
[    0.753530]  IO window: 8000-8fff
 
[    0.753589]  MEM window: 0xfd800000-0xfd8fffff
 
[    0.753642]  PREFETCH window: 0x00000000fd700000-0x00000000fd7fffff
 
[    0.753714] PCI: Bridge: 0000:00:14.0
 
[    0.753763]  IO window: 7000-7fff
 
[    0.753822]  MEM window: 0xfd600000-0xfd6fffff
 
[    0.753880]  PREFETCH window: 0x00000000fd500000-0x00000000fd5fffff
 
[    0.753959] PCI: Setting latency timer of device 0000:00:08.0 to 64
 
[    0.753970] PCI: Setting latency timer of device 0000:00:0b.0 to 64
 
[    0.754043] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
 
[    0.756582] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [AE0A] -> GSI 16 (level, low) -> IRQ 16
 
[    0.756724] PCI: Setting latency timer of device 0000:00:10.0 to 64
 
[    0.757203] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
 
[    0.757254] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [AE2A] -> GSI 16 (level, low) -> IRQ 16
 
[    0.757396] PCI: Setting latency timer of device 0000:00:12.0 to 64
 
[    0.757873] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
 
[    0.757924] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [AE3A] -> GSI 16 (level, low) -> IRQ 16
 
[    0.758054] PCI: Setting latency timer of device 0000:00:13.0 to 64
 
[    0.758529] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
 
[    0.758580] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [AE4A] -> GSI 16 (level, low) -> IRQ 16
 
[    0.758715] PCI: Setting latency timer of device 0000:00:14.0 to 64
 
[    0.758772] NET: Registered protocol family 2
 
[    0.768902] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
 
[    0.769216] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
 
[    0.769791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
 
[    0.770093] TCP: Hash tables configured (established 131072 bind 65536)
 
[    0.770153] TCP reno registered
 
[    0.773008] NET: Registered protocol family 1
 
[    0.773158] checking if image is initramfs... it is
 
[    1.194973] Freeing initrd memory: 6031k freed
 
[    1.198969] audit: initializing netlink socket (disabled)
 
[    1.198969] type=2000 audit(1232949417.159:1): initialized
 
[    1.198969] highmem bounce pool size: 64 pages
 
[    1.198969] Total HugeTLB memory allocated, 0
 
[    1.198969] VFS: Disk quotas dquot_6.5.1
 
[    1.198969] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 
[    1.198969] msgmni has been set to 1754
 
[    1.198969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
 
[    1.198969] io scheduler noop registered
 
[    1.198969] io scheduler anticipatory registered
 
[    1.198969] io scheduler deadline registered
 
[    1.198969] io scheduler cfq registered (default)
 
[    1.267206] pci 0000:00:08.0: Enabling HT MSI Mapping
 
[    1.267206] pci 0000:00:09.0: Enabling HT MSI Mapping
 
[    1.267206] pci 0000:00:0a.0: Enabling HT MSI Mapping
 
[    1.267206] pci 0000:00:0b.0: Enabling HT MSI Mapping
 
[    1.267206] pci 0000:00:10.0: Enabling HT MSI Mapping
 
[    1.267206] pci 0000:00:12.0: Enabling HT MSI Mapping
 
[    1.267206] pci 0000:00:13.0: Enabling HT MSI Mapping
 
[    1.267206] pci 0000:00:14.0: Enabling HT MSI Mapping
 
[    1.267206] pci 0000:02:00.0: Boot video device
 
[    1.267206] PCI: Setting latency timer of device 0000:00:10.0 to 64
 
[    1.267206] assign_interrupt_mode Found MSI capability
 
[    1.267206] Allocate Port Service[0000:00:10.0:pcie00]
 
[    1.267206] PCI: Setting latency timer of device 0000:00:12.0 to 64
 
[    1.267206] assign_interrupt_mode Found MSI capability
 
[    1.267206] Allocate Port Service[0000:00:12.0:pcie00]
 
[    1.267206] PCI: Setting latency timer of device 0000:00:13.0 to 64
 
[    1.267206] assign_interrupt_mode Found MSI capability
 
[    1.267206] Allocate Port Service[0000:00:13.0:pcie00]
 
[    1.267206] PCI: Setting latency timer of device 0000:00:14.0 to 64
 
[    1.267206] assign_interrupt_mode Found MSI capability
 
[    1.267206] Allocate Port Service[0000:00:14.0:pcie00]
 
[    1.270969] isapnp: Scanning for PnP cards...
 
[    1.622967] isapnp: No Plug & Play device found
 
[    1.622967] hpet_resources: 0xfeff0000 is busy
 
[    1.622967] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
 
[    1.626964] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
 
[    1.626964] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
 
[    1.626965] brd: module loaded
 
[    1.626965] PNP: No PS/2 controller found. Probing ports directly.
 
[    1.626965] serio: i8042 KBD port at 0x60,0x64 irq 1
 
[    1.626965] serio: i8042 AUX port at 0x60,0x64 irq 12
 
[    1.626965] mice: PS/2 mouse device common for all mice
 
[    1.626965] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
 
[    1.626965] rtc0: alarms up to one year, y3k
 
[    1.626965] cpuidle: using governor ladder
 
[    1.626965] cpuidle: using governor menu
 
[    1.626965] No iBFT detected.
 
[    1.626965] TCP cubic registered
 
[    1.626965] NET: Registered protocol family 17
 
[    1.630964] Using IPI No-Shortcut mode
 
[    1.630964] registered taskstats version 1
 
[    1.630964] rtc_cmos 00:05: setting system clock to 2009-01-26 05:56:58 UTC (1232949418)
 
[    1.630964] Freeing unused kernel memory: 244k freed
 
[    1.709799] ACPI: PNP0C0B:00 is registered as cooling_device0
 
[    1.709875] ACPI: Fan [FAN] (on)
 
[    1.714352] ACPI: ACPI0007:00 is registered as cooling_device1
 
[    1.714457] ACPI: ACPI0007:01 is registered as cooling_device2
 
[    1.714457] ACPI: ACPI0007:02 is registered as cooling_device3
 
[    1.716544] ACPI: Expecting a [Reference] package element, found type 0
 
[    1.717138] ACPI: LNXTHERM:01 is registered as thermal_zone0
 
[    1.717513] ACPI: Thermal Zone [THRM] (40 C)
 
[    1.910812] usbcore: registered new interface driver usbfs
 
[    1.910886] usbcore: registered new interface driver hub
 
[    1.910968] usbcore: registered new device driver usb
 
[    1.911844] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
 
[    1.912360] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
 
[    1.912418] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
 
[    1.912551] PCI: Setting latency timer of device 0000:00:02.0 to 64
 
[    1.912554] ohci_hcd 0000:00:02.0: OHCI Host Controller
 
[    1.912740] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
 
[    1.912826] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
 
[    1.924398] No dock devices found.
 
[    1.929960] SCSI subsystem initialized
 
[    1.937413] libata version 3.00 loaded.
 
[    1.952952] natsemi dp8381x driver, version 2.1, Sept 11, 2006
 
[    1.952954]  originally by Donald Becker <becker@scyld.com>
 
[    1.952956]  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
 
[    1.968726] usb usb1: configuration #1 chosen from 1 choice
 
[    1.968803] hub 1-0:1.0: USB hub found
 
[    1.968856] hub 1-0:1.0: 6 ports detected
 
[    2.071277] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
 
[    2.071336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 
[    2.071410] usb usb1: Product: OHCI Host Controller
 
[    2.071467] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
 
[    2.071525] usb usb1: SerialNumber: 0000:00:02.0
 
[    2.074221] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 22
 
[    2.074285] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AU1B] -> GSI 22 (level, low) -> IRQ 22
 
[    2.074434] PCI: Setting latency timer of device 0000:00:04.0 to 64
 
[    2.074437] ohci_hcd 0000:00:04.0: OHCI Host Controller
 
[    2.074512] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
 
[    2.074600] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe02d000
 
[    2.131077] usb usb2: configuration #1 chosen from 1 choice
 
[    2.131150] hub 2-0:1.0: USB hub found
 
[    2.131150] hub 2-0:1.0: 6 ports detected
 
[    2.232558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
 
[    2.232617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 
[    2.232691] usb usb2: Product: OHCI Host Controller
 
[    2.232747] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
 
[    2.232805] usb usb2: SerialNumber: 0000:00:04.0
 
[    2.235073] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 21
 
[    2.235073] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 21 (level, low) -> IRQ 21
 
[    2.235073] PCI: Setting latency timer of device 0000:00:02.1 to 64
 
[    2.235073] ehci_hcd 0000:00:02.1: EHCI Host Controller
 
[    2.235073] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
 
[    2.235073] ehci_hcd 0000:00:02.1: debug port 1
 
[    2.235073] PCI: cache line size of 64 is not supported by device 0000:00:02.1
 
[    2.235073] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
 
[    2.247082] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
 
[    2.247211] usb usb3: configuration #1 chosen from 1 choice
 
[    2.247291] hub 3-0:1.0: USB hub found
 
[    2.251072] hub 3-0:1.0: 6 ports detected
 
[    2.355144] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
 
[    2.355203] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 
[    2.355269] usb usb3: Product: EHCI Host Controller
 
[    2.355318] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
 
[    2.359072] usb usb3: SerialNumber: 0000:00:02.1
 
[    2.359072] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
 
[    2.359072] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AU2B] -> GSI 20 (level, low) -> IRQ 20
 
[    2.359072] PCI: Setting latency timer of device 0000:00:04.1 to 64
 
[    2.359072] ehci_hcd 0000:00:04.1: EHCI Host Controller
 
[    2.359072] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
 
[    2.359072] ehci_hcd 0000:00:04.1: debug port 1
 
[    2.359072] PCI: cache line size of 64 is not supported by device 0000:00:04.1
 
[    2.359072] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000
 
[    2.371783] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
 
[    2.371900] usb usb4: configuration #1 chosen from 1 choice
 
[    2.371975] hub 4-0:1.0: USB hub found
 
[    2.372026] hub 4-0:1.0: 6 ports detected
 
[    2.479838] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
 
[    2.479897] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 
[    2.479963] usb usb4: Product: EHCI Host Controller
 
[    2.480022] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
 
[    2.483772] usb usb4: SerialNumber: 0000:00:04.1
 
[    2.483947] ahci 0000:00:09.0: version 3.0
 
[    2.483947] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
 
[    2.483947] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
 
[    3.485289] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
 
[    3.485364] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
 
[    3.485418] PCI: Setting latency timer of device 0000:00:09.0 to 64
 
[    3.486188] scsi0 : ahci
 
[    3.486856] scsi1 : ahci
 
[    3.487480] scsi2 : ahci
 
[    3.487941] scsi3 : ahci
 
[    3.487941] scsi4 : ahci
 
[    3.487941] scsi5 : ahci
 
[    3.487941] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 219
 
[    3.487941] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 219
 
[    3.487941] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 219
 
[    3.487941] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 219
 
[    3.487941] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 219
 
[    3.487941] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 219
 
[    3.975949] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 
[    3.979938] ata1.00: ATA-8: ST3750330AS, SD15, max UDMA/133
 
[    3.979938] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
 
[    3.983845] ata1.00: configured for UDMA/133
 
[    4.303949] ata2: SATA link down (SStatus 0 SControl 300)
 
[    4.627942] ata3: SATA link down (SStatus 0 SControl 300)
 
[    4.951951] ata4: SATA link down (SStatus 0 SControl 300)
 
[    5.275944] ata5: SATA link down (SStatus 0 SControl 300)
 
[    5.599945] ata6: SATA link down (SStatus 0 SControl 300)
 
[    5.603928] scsi 0:0:0:0: Direct-Access    ATA      ST3750330AS      SD15 PQ: 0 ANSI: 5
 
[    5.603933] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
 
[    5.603933] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
 
[    5.603933] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
 
[    5.603933] PCI: Setting latency timer of device 0000:00:0a.0 to 64
 
[    6.127927] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:22:15:f3:18:1d
 
[    6.127927] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
 
[    6.131699] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
 
[    6.131699] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
 
[    6.135699] natsemi eth1: NatSemi DP8381[56] at 0xfdeff000 (0000:01:08.0), 00:09:5b:8f:32:c9, IRQ 16, port TP.
 
[    6.135699] sata_sil24 0000:06:00.0: version 1.1
 
[    6.135699] ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [AE4A] -> GSI 16 (level, low) -> IRQ 16
 
[    6.135699] PCI: Setting latency timer of device 0000:06:00.0 to 64
 
[    6.135699] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
 
[    6.135699] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
 
[    6.138040] scsi6 : sata_sil24
 
[    6.138150] scsi7 : sata_sil24
 
[    6.138221] ata7: SATA max UDMA/100 host m128@0xfd6ff000 port 0xfd6f8000 irq 16
 
[    6.138294] ata8: SATA max UDMA/100 host m128@0xfd6ff000 port 0xfd6fa000 irq 16
 
[    6.187223] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[fdefe000-fdefe7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
 
[    6.195429] Uniform Multi-Platform E-IDE driver
 
[    6.195429] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
 
[    6.210743] Driver 'sd' needs updating - please use bus_type methods
 
[    6.210880] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
 
[    6.210955] sd 0:0:0:0: [sda] Write Protect is off
 
[    6.211005] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
 
[    6.211020] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[    6.211129] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
 
[    6.211202] sd 0:0:0:0: [sda] Write Protect is off
 
[    6.211252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
 
[    6.211266] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[    6.211336]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
 
[    6.334962] sd 0:0:0:0: [sda] Attached SCSI disk
 
[    7.472310] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00017a4bb2]
 
[    8.344169] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
 
[    8.348141] ata7.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
 
[    8.348141] ata7.00: hard resetting link
 
[    8.672137] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
 
[    8.672137] ata7.01: hard resetting link
 
[    8.996134] ata7.01: SATA link down (SStatus 0 SControl 320)
 
[    8.996134] ata7.02: hard resetting link
 
[    9.320131] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 
[    9.320131] ata7.03: hard resetting link
 
[    9.644126] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
 
[    9.644126] ata7.04: hard resetting link
 
[    9.968124] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 
[    9.968124] ata7.05: hard resetting link
 
[  10.292119] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
 
[  10.292119] ata7.06: hard resetting link
 
[  10.616116] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
 
[  10.616116] ata7.00: ATA-8: ST3750330AS, SD15, max UDMA/133
 
[  10.616116] ata7.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
 
[  10.620116] ata7.00: configured for UDMA/100
 
[  10.624118] ata7.02: ATA-8: WDC WD10EACS-00ZJB0, 01.01B01, max UDMA/133
 
[  10.624118] ata7.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
 
[  10.624118] ata7.02: configured for UDMA/100
 
[  10.628115] ata7.03: ATA-6: ST380013AS, 3.05, max UDMA/133
 
[  10.628115] ata7.03: 156301488 sectors, multi 0: LBA48
 
[  10.632116] ata7.03: configured for UDMA/100
 
[  10.744124] ata7.04: failed to IDENTIFY (I/O error, err_mask=0x11)
 
[  10.744182] ata7.15: hard resetting link
 
[  10.744235] ata7: controller in dubious state, performing PORT_RST
 
[  12.976120] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
 
[  12.980092] ata7.00: hard resetting link
 
[  13.304091] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
 
[  13.304091] ata7.01: hard resetting link
 
[  13.628086] ata7.01: SATA link down (SStatus 0 SControl 320)
 
[  13.628086] ata7.02: hard resetting link
 
[  13.952085] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 
[  13.952085] ata7.03: hard resetting link
 
[  14.276081] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
 
[  14.276081] ata7.04: hard resetting link
 
[  14.600077] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 
[  14.600077] ata7.05: hard resetting link
 
[  14.924073] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
 
[  14.924073] ata7.06: hard resetting link
 
[  15.248069] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
 
[  15.252070] ata7.00: configured for UDMA/100
 
[  15.263834] ata7.02: configured for UDMA/100
 
[  15.267972] ata7.03: configured for UDMA/100
 
[  15.384075] ata7.04: failed to IDENTIFY (I/O error, err_mask=0x11)
 
[  15.384127] ata7.15: hard resetting link
 
[  15.384175] ata7: controller in dubious state, performing PORT_RST
 
[  17.616075] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
 
[  17.620046] ata7.00: hard resetting link
 
[  17.944043] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
 
[  17.944043] ata7.01: hard resetting link
 
[  18.268039] ata7.01: SATA link down (SStatus 0 SControl 320)
 
[  18.268039] ata7.02: hard resetting link
 
[  18.592035] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 
[  18.592035] ata7.03: hard resetting link
 
[  18.916033] ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
 
[  18.916033] ata7.04: hard resetting link
 
[  19.240022] ata7.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 
[  19.240022] ata7.05: hard resetting link
 
[  19.564028] ata7.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
 
[  19.564028] ata7.06: hard resetting link
 
[  19.888023] ata7.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
 
[  19.892023] ata7.00: configured for UDMA/100
 
[  19.900026] ata7.02: configured for UDMA/100
 
[  19.908023] ata7.03: configured for UDMA/100
 
[  19.908023] ata7.04: ATA-8: ST3750330AS, SD15, max UDMA/133
 
[  19.908023] ata7.04: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
 
[  19.912025] ata7.04: configured for UDMA/100
 
[  19.912025] ata7.05: unsupported device, disabling
 
[  19.912025] ata7.05: disabled
 
[  19.912025] ata7: EH complete
 
[  21.992022] ata8: SATA link down (SStatus 0 SControl 0)
 
[  21.995918] scsi 6:0:0:0: Direct-Access    ATA      ST3750330AS      SD15 PQ: 0 ANSI: 5
 
[  21.996073] sd 6:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
 
[  21.996155] sd 6:0:0:0: [sdb] Write Protect is off
 
[  21.996169] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
 
[  21.996170] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[  21.996170] sd 6:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
 
[  21.996170] sd 6:0:0:0: [sdb] Write Protect is off
 
[  21.996170] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
 
[  21.996170] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[  21.996170]  sdb: sdb1
 
[  22.028074] sd 6:0:0:0: [sdb] Attached SCSI disk
 
[  22.028074] scsi 6:2:0:0: Direct-Access    ATA      WDC WD10EACS-00Z 01.0 PQ: 0 ANSI: 5
 
[  22.028074] sd 6:2:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
 
[  22.028074] sd 6:2:0:0: [sdc] Write Protect is off
 
[  22.028074] sd 6:2:0:0: [sdc] Mode Sense: 00 3a 00 00
 
[  22.028074] sd 6:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[  22.028074] sd 6:2:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
 
[  22.028074] sd 6:2:0:0: [sdc] Write Protect is off
 
[  22.028074] sd 6:2:0:0: [sdc] Mode Sense: 00 3a 00 00
 
[  22.028074] sd 6:2:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[  22.028074]  sdc: sdc1
 
[  22.028074] sd 6:2:0:0: [sdc] Attached SCSI disk
 
[  22.028074] scsi 6:3:0:0: Direct-Access    ATA      ST380013AS      3.05 PQ: 0 ANSI: 5
 
[  22.028074] sd 6:3:0:0: [sdd] 156301488 512-byte hardware sectors (80026 MB)
 
[  22.028074] sd 6:3:0:0: [sdd] Write Protect is off
 
[  22.028074] sd 6:3:0:0: [sdd] Mode Sense: 00 3a 00 00
 
[  22.028074] sd 6:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[  22.028074] sd 6:3:0:0: [sdd] 156301488 512-byte hardware sectors (80026 MB)
 
[  22.028074] sd 6:3:0:0: [sdd] Write Protect is off
 
[  22.028074] sd 6:3:0:0: [sdd] Mode Sense: 00 3a 00 00
 
[  22.028074] sd 6:3:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[  22.028074]  sdd: sdd1
 
[  22.028074] sd 6:3:0:0: [sdd] Attached SCSI disk
 
[  22.028074] scsi 6:4:0:0: Direct-Access    ATA      ST3750330AS      SD15 PQ: 0 ANSI: 5
 
[  22.028074] sd 6:4:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
 
[  22.028074] sd 6:4:0:0: [sde] Write Protect is off
 
[  22.028074] sd 6:4:0:0: [sde] Mode Sense: 00 3a 00 00
 
[  22.028074] sd 6:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[  22.028074] sd 6:4:0:0: [sde] 1465149168 512-byte hardware sectors (750156 MB)
 
[  22.033608] sd 6:4:0:0: [sde] Write Protect is off
 
[  22.033608] sd 6:4:0:0: [sde] Mode Sense: 00 3a 00 00
 
[  22.033608] sd 6:4:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 
[  22.033608]  sde: sde1
 
[  22.048076] sd 6:4:0:0: [sde] Attached SCSI disk
 
[  22.050423] NFORCE-MCP77: 0000:00:06.0 (rev a1) UDMA133 controller
 
[  22.050480] NFORCE-MCP77: IDE controller (0x10de:0x0759 rev 0xa1) at  PCI slot 0000:00:06.0
 
[  22.050566] NFORCE-MCP77: not 100% native mode: will probe irqs later
 
[  22.050624] NFORCE-MCP77: IDE port disabled
 
[  22.050676]    ide0: BM-DMA at 0xf000-0xf007
 
[  22.050727] Probing IDE interface ide0...
 
[  22.051837] udev: renamed network interface eth0 to eth1
 
[  22.062092] udev: renamed network interface eth1_rename to eth0
 
[  22.786370] hda: HITACHI DVD-ROM GD-2500, ATAPI CD/DVD-ROM drive
 
[  23.122307] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
 
[  23.122853] hda: MWDMA2 mode selected
 
[  23.123289] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
 
[  23.140424] hda: ATAPI 24X DVD-ROM drive, 512kB Cache
 
[  23.140592] Uniform CD-ROM driver Revision: 3.20
 
[  23.207561] PM: Starting manual resume from disk
 
[  23.254539] kjournald starting.  Commit interval 5 seconds
 
[  23.254539] EXT3-fs: mounted filesystem with ordered data mode.
 
[  24.020642] udevd version 125 started
 
[  24.366012] input: Power Button (FF) as /class/input/input0
 
[  24.386009] ACPI: Power Button (FF) [PWRF]
 
[  24.386009] input: Power Button (CM) as /class/input/input1
 
[  24.418009] ACPI: Power Button (CM) [PWRB]
 
[  24.619876] ACPI: WMI: Mapper loaded
 
[  24.722006] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
 
[  24.724479] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
 
[  24.802641] input: PC Speaker as /class/input/input2
 
[  24.999399] Error: Driver 'pcspkr' is already registered, aborting...
 
[  25.360533] Adding 7815580k swap on /dev/sda6.  Priority:-1 extents:1 across:7815580k
 
[  25.650030] EXT3 FS on sda5, internal journal
 
[  26.226842] loop: module loaded
 
[  29.171250] kjournald starting.  Commit interval 5 seconds
 
[  29.171844] EXT3 FS on sda1, internal journal
 
[  29.171844] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.226248] kjournald starting.  Commit interval 5 seconds
 
[  29.227842] EXT3 FS on sda8, internal journal
 
[  29.227842] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.291250] kjournald starting.  Commit interval 5 seconds
 
[  29.291963] EXT3 FS on sda7, internal journal
 
[  29.292047] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.359119] kjournald starting.  Commit interval 5 seconds
 
[  29.359842] EXT3 FS on sda9, internal journal
 
[  29.359842] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.462657] kjournald starting.  Commit interval 5 seconds
 
[  29.463845] EXT3 FS on sda11, internal journal
 
[  29.463845] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.527761] kjournald starting.  Commit interval 5 seconds
 
[  29.527843] EXT3 FS on sda10, internal journal
 
[  29.527848] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.598648] kjournald starting.  Commit interval 5 seconds
 
[  29.599930] EXT3 FS on sda12, internal journal
 
[  29.599930] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.671230] kjournald starting.  Commit interval 5 seconds
 
[  29.671930] EXT3 FS on sda14, internal journal
 
[  29.671930] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.735461] kjournald starting.  Commit interval 5 seconds
 
[  29.735695] EXT3 FS on sda13, internal journal
 
[  29.735695] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.753404] kjournald starting.  Commit interval 5 seconds
 
[  29.755689] EXT3 FS on sdc1, internal journal
 
[  29.755689] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.782589] kjournald starting.  Commit interval 5 seconds
 
[  29.783931] EXT3 FS on sdb1, internal journal
 
[  29.783931] EXT3-fs: mounted filesystem with ordered data mode.
 
[  29.811323] kjournald starting.  Commit interval 5 seconds
 
[  29.815957] EXT3 FS on sde1, internal journal
 
[  29.815957] EXT3-fs: mounted filesystem with ordered data mode.
 
[  32.797359] NET: Registered protocol family 10
 
[  32.797359] lo: Disabled Privacy Extensions
 
[  43.266589] eth1: no IPv6 routers present
 

Latest revision as of 04:50, 25 December 2011

(out of date) -- see the real pony's dmesg for better details.