Prusa i3 Mk2 Printer
Jump to navigation
Jump to search
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
fill this in!
== PRUSA i3 MK2s PRINTER == [[File:Original_prusai3mk2_0.png]] See: http://manual.prusa3d.com/c/English_manuals Status: 5/22/19 (Colin Roberson) * Uploaded firmware for "titan aero" extruder * Bed leveling sucks at the moment 5/27/19 (Derek Redfern) * Shifted PINDA sensor slightly downwards and ran full XYZ calibration. Got most of the way through but it didn't seem to detect cal point #4 on the second round (smooshed the tip and PINDA sensor into the bed). Working from sections 6.3.5 and 18.104.22.168 in the [https://www.prusa3d.com/downloads/manual/prusa3d_manual_mk2_en.pdf manual].
Please note that all contributions to Noisebridge are considered to be released under the Creative Commons Attribution-NonCommercial-ShareAlike (see
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted work without permission!
To protect the wiki against automated edit spam, we kindly ask you to solve the following CAPTCHA:
(opens in new window)
Retrieved from "
Not logged in
What links here