Prusa i3 Mk2 Printer
Revision as of 07:29, 15 April 2020 by Lxpk (talk | contribs) (Created page with "{{3dprinting}} == PRUSA i3 MK2s PRINTER == File:Original_prusai3mk2_0.png See: http://manual.prusa3d.com/c/English_manuals Status: 5/22/19 (Colin Roberson) * Uploaded fir...")
| Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Resources | Events | Projects | 5MoF | Meetings | Donate | (Edit) |
| Guilds | Meta | Code | Electronics | Fabrication | Games | Sewing | Music | AI | Neuro | Philosophy | Funding | Art | Security | Ham | Brew | Edit |
| Fabrication | Sewing | 3D Printing | Wood Shop | Metal Shop | SparkleForge | Laser Cutter | Vinyl Cutter | Edit |
| 3D Printing | Notes | Monoprice Miniprinters | Creality CR-10 | EmberPrinter | Connex 350 | Edit |
PRUSA i3 MK2s PRINTER[edit]
See: http://manual.prusa3d.com/c/English_manuals
Status: 5/22/19 (Colin Roberson)
- Uploaded firmware for "titan aero" extruder
- Bed leveling sucks at the moment
5/27/19 (Derek Redfern)
- Shifted PINDA sensor slightly downwards and ran full XYZ calibration. Got most of the way through but it didn't seem to detect cal point #4 on the second round (smooshed the tip and PINDA sensor into the bed). Working from sections 6.3.5 and 6.3.10.2 in the manual.