RFID Hacking/usrp/

From Noisebridge
< RFID Hacking(Difference between revisions)
Jump to: navigation, search
Line 3: Line 3:
 
$ svn co -r 10532 http://gnuradio.org/svn/gnuradio/trunk gnuradio
 
$ svn co -r 10532 http://gnuradio.org/svn/gnuradio/trunk gnuradio
  
1. Copy gen2_reader/gnuradio/misc_files/grc_gr_gen2_rfid.m4 to gnuradio/config
+
step #1 Copy gen2_reader/gnuradio/misc_files/grc_gr_gen2_rfid.m4 to gnuradio/config
  
 
cp gen2_reader/gnuradio/misc_files/grc_gr_gen2_rfid.m4 gnuradio/config
 
cp gen2_reader/gnuradio/misc_files/grc_gr_gen2_rfid.m4 gnuradio/config
  
3.
+
step #2
  
 
cp -a gen2_reader/gnuradio/gr-gen2-rfid gnuradio/
 
cp -a gen2_reader/gnuradio/gr-gen2-rfid gnuradio/
  
4.
+
step #4
 
line 304:
 
line 304:
 
GRC_GR_GEN2_RFID
 
GRC_GR_GEN2_RFID
Line 28: Line 28:
 
gnuradio build:
 
gnuradio build:
 
./configure --prefix=/usr/local/gnuradio-rfid --enable-gr-gen2-rfid --enable-gnuradio-core
 
./configure --prefix=/usr/local/gnuradio-rfid --enable-gr-gen2-rfid --enable-gnuradio-core
 +
 +
make
 +
 +
make install
 +
 +
step #8
 +
cp gen2_reader/gnuradio/misc_files/gen2_reader.rbf /usr/local/gnuradio-rfid/share/usrp/rev4

Revision as of 17:47, 11 April 2009

notes about the install procedure for someone's modified gnuradio library:

$ svn co -r 10532 http://gnuradio.org/svn/gnuradio/trunk gnuradio

step #1 Copy gen2_reader/gnuradio/misc_files/grc_gr_gen2_rfid.m4 to gnuradio/config

cp gen2_reader/gnuradio/misc_files/grc_gr_gen2_rfid.m4 gnuradio/config

step #2

cp -a gen2_reader/gnuradio/gr-gen2-rfid gnuradio/

step #4 line 304: GRC_GR_GEN2_RFID

--

This here are software dependencies from a different gnuradio project so it should contain most gnuradio dependencies : apt-get install -y libboost-dev python python2.5-dev libfftw3-dev swig sdcc-nf libusb-dev guile-1.8-dev libcppunit-dev libosip2-dev libortp7-dev asterisk

gnuradio dependencies:

  • built/installed the latest libboost

apt-get install libgsl0-dev

gnuradio build: ./configure --prefix=/usr/local/gnuradio-rfid --enable-gr-gen2-rfid --enable-gnuradio-core

make

make install

step #8 cp gen2_reader/gnuradio/misc_files/gen2_reader.rbf /usr/local/gnuradio-rfid/share/usrp/rev4

Personal tools