Refillable Parts Area

From Noisebridge
Jump to: navigation, search
[2:36 AM]
lizzie: Matt and I were talking about having a special subset of
 the parts shelves be specific parts that we re-order when they're
 running low and can donate to when we use.

[2:39 AM]  
The parts section is great but it can be really annoying to design boards, 
since we don't have parts numbers for many parts, and the footprints are 
unpredictable.

[2:39 AM]  
Being able to reorder the entire special stock would be cool.


Please add to this list of electronics components and materials that we would like to see maintained at Noisebridge[edit]


Qty Part / material Short description
1 250 Red LED Red LED, 5mm, through-hole
2 250 Green LED Green LED, 5mm, through-hole
3 250 Blue LED Blue LED, 5mm, through-hole
4 Jumper wires Pre-made jumper wires
5 Male headers 0.1" pitch male header pins
6 Female headers 0.1" pitch female header pins
7 Perf boards Various sizes
8 potentiometers with the same footprints; that can actually fit on a breadboard
9 switches with predictable footprints
10 common caps
11 common resistors
12 common op-amps
13 74xx series logic inverters, MUXes, etc
14 general purpose BJTs in both P- and N-doped flavors
15 general purpose MOSFETS in both P- and N-doped flavors
16 connectors, jacks, plugs, header pins, etc
17 1N400x series diodes
18 DC jacks commonly called CCTV 2.1mm jacks
19 Step up and down converters $1-$2 a piece on aliexpress
20 PCA9685 makes controlling LEDs and servos super easy
21 DHT11/22 great temperature and humidity sensor
22 DSB18B20 great simple temp sensor
23 3.5mm audio cable connectors
24 OLED display mini ones for arduino and pi
25 JST connectors
26
27
28
29
30