Jump to navigation
Jump to search
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
fill this in!
== Plan == * decide what system to build ** what print materials? ABS, [http://en.wikipedia.org/wiki/Polycaprolactone PCL] aka Shapelock, [http://en.wikipedia.org/wiki/Polylactic_acid PLA], ... * Print head ** multiple print heads? ** http://reprap.org/bin/view/Main/RepRapOneDarwinThermoplastExtruder ** http://objects.reprap.org/wiki/Nophead%27s_Extruder_Tweaks * Chassis ** what design? (lasercut acrylic, plywood + steel rod, ...) ** The [http://www.reprap.org/bin/view/Main/McWire_Cartesian_Bot_1_2 McWire] * Electronics ** control electronics design (something better than "one Arduino to rule them all" please) * Stepper Motors ** we need 4 [http://www.reprap.org/bin/view/Main/StepperMotor stepper motors] conforming to the following specs: *** NEMA 23 size, bipolar, about 100 oz-in torque, dual-output shaft * purchase parts * * Consult the [[McWire BOM]] for what to buy * build it! Some parts of RepRap can be developed independently. In particular, the [http://reprap.org/bin/view/Main/ExtruderMechanicalParts Extruder] "print head" is pretty much independent of the chassis mechanism, and looks like a fun project. Might want to consider other print mechanisms too; this one may be specific to a few of the thermoplastics.
Please note that all contributions to Noisebridge are considered to be released under the Creative Commons Attribution-NonCommercial-ShareAlike (see
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted work without permission!
To protect the wiki against automated edit spam, we kindly ask you to solve the following CAPTCHA:
(opens in new window)
Retrieved from "
Not logged in
- Status: MOVED
What links here