Difference between revisions of "RepRap"

From Noisebridge
Jump to: navigation, search
(Plan: expand plan, mention polymer and chassis options, link to builder's wiki)
Line 15: Line 15:
* [[User:Adi|adi]]
* [[User:Adi|adi]]
* [[User:Ioerror|Jacob]]
* [[User:Ioerror|Jacob]]
* [[User:TurksHead|TurksHead]]
== Plan ==
== Plan ==

Revision as of 21:24, 20 October 2008

From reprap.org:

Reprap image from reprap.org
RepRap is short for Replicating Rapid-prototyper. It is the practical self-copying 3D printer shown on the right - a self-replicating machine. This 3D printer builds the parts up in layers of plastic. This technology already exists, but the cheapest commercial machine would cost you about €30,000. And it isn't even designed so that it can make itself. So what the RepRap team are doing is to develop and to give away the designs for a much cheaper machine with the novel capability of being able to self-copy (material costs are about €500).

The RepRap project is a bit optimistic in their description -- their "self-replicating" machine is capable of printing all of the non-commodity parts of their machine, but still needs stepper motors, steel rods, screws, nuts, control circuitry, and of course a human to assemble the pieces.




  • decide what system to build
    • what print materials? ABS, PCL aka Shapelock, PLA, ...
    • multiple print heads?
    • what chassis design? (lasercut acrylic, plywood + steel rod, ...)
    • control electronics design (something better than "one Arduino to rule them all" please)
  • purchase parts
  • build it!

Some parts of RepRap can be developed independently. In particular, the Extruder "print head" is pretty much independent of the chassis mechanism, and looks like a fun project. Might want to consider other print mechanisms too; this one may be specific to a few of the thermoplastics.

The Builders wiki has some very useful content.