Difference between revisions of "RepRap"

From Noisebridge
Jump to: navigation, search
Line 38: Line 38:
== Status ==
== Status ==
* [[User:Turkshead|TurksHead]] has started building a McWire chassis. (10/22)
* [[User:Turkshead|TurksHead]] has started building a [** The [http://www.reprap.org/bin/view/Main/McWire_Cartesian_Bot_1_2 McWire] chassis. (10/22)
* [[User:Adi|adi]] is researching print materials and print heads. (10/23)
* [[User:Adi|adi]] is researching print materials and print heads. (10/23)

Revision as of 05:26, 25 October 2008

From reprap.org:

Reprap image from reprap.org
RepRap is short for Replicating Rapid-prototyper. It is the practical self-copying 3D printer shown on the right - a self-replicating machine. This 3D printer builds the parts up in layers of plastic. This technology already exists, but the cheapest commercial machine would cost you about €30,000. And it isn't even designed so that it can make itself. So what the RepRap team are doing is to develop and to give away the designs for a much cheaper machine with the novel capability of being able to self-copy (material costs are about €500).

The RepRap project is a bit optimistic in their description -- their "self-replicating" machine is capable of printing all of the non-commodity parts of their machine, but still needs stepper motors, steel rods, screws, nuts, control circuitry, and of course a human to assemble the pieces.




Some parts of RepRap can be developed independently. In particular, the Extruder "print head" is pretty much independent of the chassis mechanism, and looks like a fun project. Might want to consider other print mechanisms too; this one may be specific to a few of the thermoplastics.


  • TurksHead has started building a [** The McWire chassis. (10/22)
  • adi is researching print materials and print heads. (10/23)