Resources/Shop

From Noisebridge
< Resources(Difference between revisions)
Jump to: navigation, search
(5 intermediate revisions by 4 users not shown)
Line 4: Line 4:
 
==Tools==
 
==Tools==
  
* Lathe (7"x12" Cummins)
+
* [[Lathe]] (7"x12" Cummins)
 
** Check http://www.mini-lathe.com/ for great info
 
** Check http://www.mini-lathe.com/ for great info
 
* [[MaxNCMill | CNC Mill (MaxNC 10)]]
 
* [[MaxNCMill | CNC Mill (MaxNC 10)]]
 
* [[ Resources/Shop/Bandsaw | Bandsaw (Sears 10" 1/3 HP)]]
 
* [[ Resources/Shop/Bandsaw | Bandsaw (Sears 10" 1/3 HP)]]
* Radial saw (Ryobi 8 1/4" RA-200)
+
* [[Radial saw]] (Ryobi 8 1/4" RA-200)
* Bench grinder (Ryobi 6")
+
* [[Bench grinder]] (Ryobi 6")
* Drill press (Ryobi RDP1850)
+
* [[Drill press]] (Ryobi RDP1850)
* Air compressor (2.5SCFM @ 90psi, 6gal)
+
* [[Air compressor]] (2.5SCFM @ 90psi, 6gal)
 
* Assorted hand tools
 
* Assorted hand tools
 
** Hacksaws
 
** Hacksaws
 
** Drill
 
** Drill
** Heat gun
+
** [[Heat gun]]
 
* Assorted screws, bolts, etc
 
* Assorted screws, bolts, etc
 +
 +
==Other Noisebridge Tools==
 +
* [[Laser cutter]]
 +
* [[3D printers]]
  
 
==Safety==
 
==Safety==

Revision as of 11:19, 12 October 2012

The shop is located to the left of the main entrance at 2169. The buildout is a work in progress as of 9/25/09. fixme with updates, photos.

Lathe, drill press and others

Tools

Other Noisebridge Tools

Safety

A note regarding cutting metal in stationary tools:

The shavings that come off the metal piece being cut are HOT!

In a stationary tool that has been used on wood, there is typically a nice big thick bed of sawdust inside the tool. When the metal shavings fall into this bed of sawdust, an awesome smoldery fire can build up sight unseen inside of the tool. Yay!

When possible it is best to have two separate dedicated tools... and/or if one is going to be transfered over into metal service the inside should be vacuumed out first, and/or the operator should check inside the machine when they are done.

Personal tools