Wood Shop: Difference between revisions

From Noisebridge
Jump to navigation Jump to search
No edit summary
m (Reverted edits by ImageReplacer (talk) to last revision by AlSweigart)
(23 intermediate revisions by 14 users not shown)
Line 1: Line 1:
* Lathe (7"x12" Cummins)
The shop is located to the left of the main entrance at 2169. The buildout is a work in progress as of 9/25/09. fixme with updates, photos.
[[File:Shop.jpg|thumb|right|Lathe, drill press and others]]
 
A wish-list for the shop is posted on [[Dirty Shop Wish List]]
==Tools==
 
* [[Table Saw]] (Black & Decker BT2500)
* [[Lathe]] (7"x12" Cummins)
** Check http://www.mini-lathe.com/ for great info
** Check http://www.mini-lathe.com/ for great info
* Mill (MaxNC 10)
* [[MaxNCMill | CNC Mill (MaxNC 10)]]
** This one, right? http://www.maxnc.com/maxnc_10_cl-b.htm
* [[ Resources/Shop/Bandsaw | Bandsaw (Sears 10" 1/3 HP)]]
** http://engineering.purdue.edu/AAE/Academics/Courses/Raisbeck/images/resources/cnc/MAXNCmanual.pdf
* [[Radial saw]] (Ryobi 8 1/4" RA-200)
* Bandsaw (Sears 10" 1/3 HP)
* [[Bench grinder]] (Ryobi 6")
* Radial saw (Ryobi 8 1/4" RA-200)
* [[Disk sander]] (Delta 31-120 12")
* Bench grinder (Ryobi 6")
* [[Drill press]] (Ryobi RDP1850)
* Drill press (Ryobi RDP1850)
* [[Air compressor]] (2.5SCFM @ 90psi, 6gal)
* Air compressor (2.5SCFM @ 90psi, 6gal)
* Assorted hand tools
* Assorted hand tools
** Hacksaws
** Hacksaws
** Drill
** Drill
** Heat gun
** [[Heat gun]]
* Assorted screws, bolts, etc
* Assorted screws, bolts, etc
==Other Noisebridge Tools==
* [[Lasercutter | Laser cutter]]
* [[3D printers]]
==Safety==
'''A note regarding cutting metal in stationary tools:'''
The shavings that come off the metal piece being cut are HOT!
In a stationary tool that has been used on wood, there is typically a nice big thick bed of sawdust inside the tool. When the metal shavings fall into this bed of sawdust, an awesome smoldery fire can build up sight unseen inside of the tool. Yay!
When possible it is best to have two separate dedicated tools... and/or if one is going to be transfered over into metal service the inside should be vacuumed out first, and/or the operator should check inside the machine when they are done.

Revision as of 09:20, 6 February 2014

The shop is located to the left of the main entrance at 2169. The buildout is a work in progress as of 9/25/09. fixme with updates, photos.

Lathe, drill press and others

A wish-list for the shop is posted on Dirty Shop Wish List

Tools

Other Noisebridge Tools

Safety

A note regarding cutting metal in stationary tools:

The shavings that come off the metal piece being cut are HOT!

In a stationary tool that has been used on wood, there is typically a nice big thick bed of sawdust inside the tool. When the metal shavings fall into this bed of sawdust, an awesome smoldery fire can build up sight unseen inside of the tool. Yay!

When possible it is best to have two separate dedicated tools... and/or if one is going to be transfered over into metal service the inside should be vacuumed out first, and/or the operator should check inside the machine when they are done.