Editing
RouterBOARD 133
(section)
Jump to navigation
Jump to search
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
===<span style="color:#00FF00; background:#000000">more console out</span>=== <pre> RouterBOOT booter 2.7 RouterBoard 133 CPU frequency: 175 MHz Memory size: 32 MB Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting up elf image... OK jumping to kernel code mem_detect: disable buffers for both banks mem_detect: checking for 64MB chip in 1st bank mem_detect: write 0xAAAAAAAA to 0xA0000000 mem_detect: delay 10000 ns mem_detect: pattern at 0xA1000000 is 0x55555555 mem_detect: write 0xAAAAAAAA to 0xA0000000 mem_detect: delay 10000 ns mem_detect: pattern at 0xA2000000 is 0x55555555 mem_detect: chip size in 1st bank is 64MB mem_detect: enable buffers for both banks mem_detect: 1x64MB memory found <6>ADM5120 revision 8, running at 175MHz <6>Boot loader is: RouterBOOT <6>Booted from : NAND flash <6>Board is : RouterBOARD 133 <6>Memory size : 32MB done meminit Linux version 2.6.16.16 (xyu@xyu-dev) (gcc version 3.4.6 (OpenWrt-2.0)) #14 Wed Sep 26 18:49:21 PDT 2007 ADM5120 board setup CPU revision is: 0001800b Determined physical RAM map: memory: 013d1000 @ 00c2f000 (usable) Built 1 zonelists Kernel command line: console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 8kB, 2-way, linesize 16 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 256 (order: 8, 4096 bytes) Using 87.500 MHz high precision timer. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 19960k/20292k available (2336k kernel code, 316k reserved, 447k data, 9544k init, 0k highmem) Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. unpacking initramfs....done NET: Registered protocol family 16 adm5120: system has PCI BIOS usbcore: registered new driver usbfs usbcore: registered new driver hub Algorithmics/MIPS FPU Emulator v1.5 PCI: slot number 0 is not supported PCI: mapping irq for 0000:00:02.0 pin:1, irq:15 yaffs Sep 20 2007 18:44:25 Installing. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered watchdog hb: 90 WDOG0: 0xa32806dd WDOG1: 0x7fff06de adm5120_wdt_init using heartbeat 90 s cycles 9000 watchdog hb: 90 WDOG0: 0xa3280000 WDOG1: 0x7fff0000 ttyS0 at I/O 0x12600000 (irq = 9) is a ADM5120 ttyS1 at I/O 0x12800000 (irq = 10) is a ADM5120 eth0: ADM5120 switch port0 eth1: ADM5120 switch port1 eth2: ADM5120 switch port2 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> RB1xx nand NAND device: Manufacturer ID: 0xad, Chip ID: 0x76 (Hynix NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x00000000-0x00400000 : "/bootpart" 0x00400000-0x00800000 : "/storage" 0x00800000-0x00810000 : "paniclog" 0x00810000-0x04000000 : "extra" usbmon: debugfs is not available mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered ip_conntrack version 2.4 (256 buckets, 2048 max) - 232 bytes per conntrack ip_conntrack_pptp version 3.1 loaded ip_nat_pptp version 3.0 loaded ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> Freeing unused kernel memory: 9544k freed init started: BusyBox v1.1.0 (2007.09.21-01:28+0000) multi-call binary Please press Enter to activate this console. yaffs: dev is 32505856 name is "mtdblock0" yaffs: passed flags "" yaffs: Attempting MTD mount on 31.0, "mtdblock0" yaffs: auto selecting yaffs1 yaffs: dev is 32505857 name is "mtdblock1" yaffs: passed flags "" yaffs: Attempting MTD mount on 31.1, "mtdblock1" yaffs: auto selecting yaffs1 adm5120_wdt: starting watchdog w/timeout 90 seconds watchdog hb: 90 WDOG0: 0xa328028c WDOG1: 0x7fff028c ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, REGOPS_FUNC) wlan: 0.8.4.2 (svn 10828) ath_rate_sample: 1.2 (svn 10828) ath_pci: 0.9.4.5 (svn 10828) PCI: Enabling device 0000:00:02.0 (0000 -> 0002) wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 10.4 phy 6.1 radio 6.3 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons couldn't load module 'wlan_scan_sta' (-89) unable to load wlan_scan_sta wifi0: Atheros 5212: mem=0x11400000, irq=15 click: starting router thread pid 478 (818d3480) wlan: mac acl policy registered !!!!! reading /tmp/mtunnel_state failed: No such file or directory couldn't load module 'wlan_scan_monitor' (-89) unable to load wlan_scan_monitor BusyBox v1.1.0 (2007.09.21-01:28+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. http://meraki.com/ Welcome to your Meraki device. Please look for developer information at http://meraki.com. We would like to encourage you to play with this platform and add your own features to it. However, our lawyers require us to tell you that much of the software on this device is protected by copyrights, and may not be redistributed or sold. Like hacking on wireless stuff? Come work with us! jobs@meraki.com Happy Hacking! 00:18:0A:00:F1:7C:/# </pre> Wiki page for RB133 http://wiki.openwrt.org/doku.php?id=oldwiki:openwrtdocs:hardware:mikrotik:rb100
Summary:
Please note that all contributions to Noisebridge are considered to be released under the Creative Commons Attribution-NonCommercial-ShareAlike (see
Noisebridge:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted work without permission!
To protect the wiki against automated edit spam, we kindly ask you to solve the following CAPTCHA:
Cancel
Editing help
(opens in new window)
Navigation menu
Personal tools
Not logged in
Talk
Contributions
Log in
Request account
Namespaces
Page
Discussion
English
Views
Read
Edit
View history
More
Search
Dig in!
Noisebridge
- Status: MOVED
- Donate
- ABOUT
- Accessibility
- Vision
- Blog
Manual
MANUAL
Visitors
Participation
Community Standards
Channels
Operations
Events
EVENTS
Guilds
GUILDS
- Meta
- Electronics
- Fabrication
- Games
- Music
- Library
- Neuro
- Philosophy
- Funding
- Art
- Crypto
- Documentation/Wiki
Wiki
Recent Changes
Random Page
Help
Categories
(Edit)
Tools
What links here
Related changes
Special pages
Page information