Screenprinting: Difference between revisions
Jump to navigation
Jump to search
(Created page with "# This should show up as a heading 1. Steps 2.") |
No edit summary |
||
Line 1: | Line 1: | ||
This should show up as a heading | |||
Step 1: Set Up Screen. | |||
Tightly stretch the fabric (chiffon) on a quilting ring or a frame | |||
2. | such that there are no wrinkles. | ||
Step 2: Coat Screen. | |||
Coat screen with photo sensitive emulsion. | |||
Step 3: Dryhttps://noisebridge.net/index.php?title=Special%3ASearch&search=upload&go=Go screen. | |||
In a dark room allow the screen to dry, the use of a fan will make drying more quickly (20min) | |||
Step 4: Burn Screen. | |||
Take transparency and place on outside of screen, right side down, with clear tape. | |||
Place under a light source. The lighting hood in the greenroom works very well & will take 5 mins. | |||
(note:Under exposed the emulation will completely wash out, over exposed the image wont rinse out) | |||
[[Image:IMG-2967.jpg]]Step 3: Rinse Out Image. | |||
Step 4: Tape Up Screen if there are visible holes. | |||
Step 5: Set Screen in a way in which it can easily be move up & down | |||
Step 6: Print. | |||
Step 7: Clean. | |||
(note: Before applying other colors, rinse out the screen and dry.) | |||
Step 9: |
Revision as of 16:27, 20 December 2017
This should show up as a heading
Step 1: Set Up Screen. Tightly stretch the fabric (chiffon) on a quilting ring or a frame such that there are no wrinkles. Step 2: Coat Screen. Coat screen with photo sensitive emulsion. Step 3: Dryhttps://noisebridge.net/index.php?title=Special%3ASearch&search=upload&go=Go screen. In a dark room allow the screen to dry, the use of a fan will make drying more quickly (20min) Step 4: Burn Screen. Take transparency and place on outside of screen, right side down, with clear tape. Place under a light source. The lighting hood in the greenroom works very well & will take 5 mins. (note:Under exposed the emulation will completely wash out, over exposed the image wont rinse out) File:IMG-2967.jpgStep 3: Rinse Out Image. Step 4: Tape Up Screen if there are visible holes. Step 5: Set Screen in a way in which it can easily be move up & down Step 6: Print. Step 7: Clean. (note: Before applying other colors, rinse out the screen and dry.) Step 9: