Sewing

From Noisebridge
(Difference between revisions)
Jump to: navigation, search
(Latest News)
(Sewing Machines)
 
(127 intermediate revisions by 23 users not shown)
Line 1: Line 1:
= Sewing Machines =
+
= Latest News =
  
== Latest News ==
+
[[File:Sewing.jpg|300px|right]]
There are a few sewing machines that are broken, and there are some that are not yet documented on this wiki.
+
  
My Name is Maria. I am interested in getting the sewing machines to work.  I am interested in fixing the industrial machines. I have worked on them in the past. I have taken down the model numbers.  I am planning to buy 1. a bobbin case for the juki 2. a threading stylet for the serger and needles. These parts are cheep.  Also the lamps are about $20.00 each and I can install them for free.  The oil basin needs oil once in a while.  I will then test the machines to see if they are working.  As far as I can see they look like they work.  Please feel free to contact me at 415 654 5915 or mariabarbas@icloud.com.  It would be fun to sew and socialize with other like seamstresses.  thanks
+
  *For the latest announcements, please subscribe to the email list here: https://www.noisebridge.net/mailman/listinfo/sewing/
 +
The sewing area has been remodeled! Some machines have been added and others have been repaired. Also, there is a new [[SCoT|Sewing and Crafting]] event. Come join us on the 1st and 3rd Tuesdays of every month from 6:30pm to 8:30pm
  
== Overview ==
+
= Overview =
  
We have sewing machines at Noisebridge
+
We have three mostly functional sewing machines:
 +
*Straight Stitch Drop Feed (Juki DDL 5550-6)
 +
*Five-thread Overlock Serger (Juki MO-2416)
 +
*130-Stitch Computerized Sewing and Quilting (Brother XR1355)
  
== Tips ==
+
= Tips =
* For both industrial machines, please DO NOT unthread them unless you must, to fix a snarl. Instead, to remove (say) your own thread, simply cut it close to the spool so that the next person can simply tie a knot with the next thread and pull it all the way through to the needle.
+
* Please DO NOT unthread the sewing machines unless you must. (e.g. to remove a spool of thread, simply cut it close to the spool so that the next person can simply tie a knot with the next thread and pull it all the way through to the needle)
  
* Needles for these machines are <b><span style="color:red">NOT</span></b> sold at most fabric stores.  Both kinds take the same type of needle, luckily.
+
* Needles, bobbins, and other parts  are located in labeled drawers underneath the pegboard (PLEASE KEEP IT ORGANIZED).  
** The closest place to get them is at Apparel City, on Howard between 11th & 12th.   
+
** The closest place to get parts is at Apparel City, on Howard between 11th & 12th.   
** Tell them you want needles for a Juki DDL 5550 and they'll give you the right kind.  Needles come in sizes; size 10, 12, 14, 16 are good for most purposes.
+
** Needles may differ between machines and come in sizes (10, 12, 14, 16, etc.). The higher numbers are heavier gauge needles suitable for thicker fabrics.  Leather needles have a tiny blade at the tip. Don't use a leather needle for other fabrics, though, it will cut the threads rather than squeezing between them, leaving holes that may start rips.
** The higher numbers are heavier gauge needles suitable for thicker fabrics.  Leather needles have a tiny blade at the tip; they aren't absolutely necessary for sewing on leather but they make it easier, especially for many layers. Don't use a leather needle for other fabrics, though, it will cut the threads rather than squeezing between them, leaving holes that may start rips.
+
**Needles for the straight stitch machines must be inserted with the scarf facing right. Please check the respective manuals.
  
* If you've never operated a sewing machine before, ask some people at Noisebridge such as Rachel, Rachel, Crutcher, Alex, Ariel. Or do some research online.  You are very unlikely to damage the machines by simply messing around with them, but they are not completely self-explanatory and this page does assume a certain amount of prior general knowledge. A good time to get help is Wednesday evenings, when [[SCoW]] meets.
+
* If you've never operated a sewing machine before, ask some people at Noisebridge (Kyle or Ely). Sewing machines are not self-explanatory and this page does assume a certain amount of prior general knowledge.
 +
**Read the manual and do some research online.  
 +
**Printed manuals for the two Juki Machines and the Thompson are located in a grey binder on the bookshelf
  
=== Repairing a Sewing Machine ===
+
*Use scraps for testing to determine thread tension and sewing speed.
* If a sewing machine is actually broken and non functional, as opposed to just you can't figure out how to make it work, please call Billy from Apparel City at 415-816-8645 (mobile) and schedule an appointment for him to come fix it. 
+
** He usually charges around $80 per hour, plus parts. 
+
** Email the [https://www.noisebridge.net/mailman/listinfo/sewing/|sewing list] and people will chip in to cover this.  If you can't manage this process, email the sewing list and find someone else who can.  Also, please put a note on the machine so people know what is going on with it.
+
  
= Sewing Work Area =
+
*Recommended reading:
  
[[File:SewingMachineStack.jpg|Mystery Sewing Machines in a Stack|thumb]]
+
[http://www.threadsmagazine.com/item/3751/machine-needle-know-how About sewing machine needles]
  
= Hardware =
+
[http://www.threadsmagazine.com/item/6847/perfect-machine-tension-every-time Understanding thread tension]
  
== The industrial straight stitch Juki sewing machine DDL-5550-6 ==
+
[http://leatherworker.net/forum/index.php?showtopic=25126&st=0 Sew heavy material]
  
=== Current Status of the Juki Sewing Machine ===
+
[http://www.wipo.int/pctdb/en/wo.jsp?WO=2002000984&IA=US2001041173&DISPLAY=STATUS What is a thread wiper?]
* Current Status: June 21, 2013 '''This machine is not currently working.''' ''The needle thread guides are being ordered and replaced. Also, the 'needle hook relationship' must be adjusted as described in the manual.''
+
  
* [[Juki Maintenance Notes]] is an ongoing project to document the repair of the Juki DDL-5550-6.
+
==Winding a Bobbin==
 +
*Juki DDL-5550-6 & Artisan 618-1SC
 +
**To wind a bobbin, place the empty bobbin on the horizontal spindle to the right of the machine body (near the hand wheel).  Run a second thread through the upper holder, down to the tensioner at the back of the right side of the machine, in line with the spindle.  Thread the end through one of the holes in the bobbin side, from the inside to the outside.  Press the lever to push the spindle down in contact with the sewing machine belt.  While holding the thread end so it doesn't just whip out of the bobbin, press the pedal to run a couple of inches (if there were fabric in the machine).  Soon enough you can let go of the thread end as it will have been caught by windings on top of it.  If you are doing a lot of sewing, you can start a new bobbin before the current one is empty, and let it wind up as you sew.  When the bobbin is full, the lever will automatically snap out away from the belt and stop winding thread.
 +
*Thompson PW-500 may not wind evenly tensioned bobbins automatically. It may be better to wind the bobbins on a different machine.
  
=== Overview ===
+
== Repairing a Sewing Machine ==
* General fabrics, light-weight materials and medium weight materials.  
+
* If a sewing machine is actually broken and non functional, as opposed to just you can't figure out how to make it work, please call Billy from Apparel City at 415-816-8645 (mobile) and schedule an appointment for him to come fix it.
* '''Not for leather or book binding.''' Sorry, please use the right tool for the job.
+
** He usually charges around $80 per hour, plus parts.
 +
** Email the [https://www.noisebridge.net/mailman/listinfo/sewing/|sewing list] and people will chip in to cover this.  If you can't manage this process, email the sewing list and find someone else who can.  Also, please put a note on the machine so people know what is going on with it.
  
==== Official Manual for the Juki Sewing Machine DDL-5550-6 ====
+
= Sewing Machines =  
PDF - Manual for the Juki Sewing Machine DDL-5550-6 -- https://noisebridge.net/wiki/File:Juki-ddl-5550-6.pdf
+
  
==== Official Product Page for the Juki Sewing Machine DDL-5550-6 ====
+
== Straight Stitch Drop Feed (Juki DDL 5550-6) ==
* http://www.juki.co.jp/industrial_e/products_e/apparel_e/1needle_e/ddl5550n7.html
+
  
=== Tribal Knowledge Juki Sewing Machine ===
+
*DO NOT use the thread cut function (DO NOT depress the back part of the pedal)
 +
**The machine is missing a thread wiper and needle guide for thread cutting.
 +
**[[Juki Maintenance Notes]] - Replacing the counter knife, needle bar, thread guides, etc.
  
* The term 'industrial sewing machine' does not mean that it can poke a hole through anything. It means that it will work reliably on ordinary fabrics for years on end. Please do not sew heavy materials like leather on this machine.
+
=== Overview ===
* This machine does only straight stitches, no zig-zag (and no button holes).  
+
* General fabrics, light-weight materials and medium weight materials.  
* It can go very fast. It has an automatic thread cutter which is triggered by pushing down on the treadle with your heel, the opposite from how you push to have it make stitches. There's a set of buttons on a widget atop the machine which control automated backstitching.  If the top light is lit, the machine will do a backstitch when you start a seam.  If the bottom light is lit, it will do a backstitch prior to cutting the thread, when you push back on the treadlePush the associated button to toggle the backstitchingIf this isn't clear yet, take some scrap fabric and play around with it until it makes sense.  There's scrap fabric in the wheeled canvas bins under the table by the window.
+
** '''Not for leather or book binding.''' Please use the right tool for the job.
 +
* Electronic Motor
 +
** The top speed of the machine can be adjusted using one of the knobs on a box under the table, next to the motorIt is the second knob downRight is faster, left is slower.
  
* Bobbins are kept in the drawer under the left side of the machine's table. Also in that drawer are thread snips, replacement needles, and a little screwdriver to change the needle with.  Note that the needle faces to the left, instead of to the front, as on most home sewing machines.  If you replace a broken needle and put it in facing forwards, nothing will break but the machine will not form stitches.
+
=== Manual for Juki DDL-5550 ===
 +
PDF - https://noisebridge.net/wiki/File:Juki-ddl-5550-6.pdf
  
** To wind a bobbin, place the empty bobbin on the horizontal spindle to the right of the machine body (near the hand wheel).  Run a second thread through the upper holder, down to the tensioner at the back of the right side of the machine, in line with the spindle.  Thread the end through one of the holes in the bobbin side, from the inside to the outside.  Press the lever to push the spindle down in contact with the sewing machine belt.  While holding the thread end so it doesn't just whip out of the bobbin, press the treadle to run a couple of inches (if there were fabric in the machine). Soon enough you can let go of the thread end as it will have been caught by windings on top of it.  If you are doing a lot of sewing, you can start a new bobbin before the current one is empty, and let it wind up as you sew.  When the bobbin is full, the lever will automatically snap out away from the belt and stop winding thread.
+
=== Overview ===
 +
*Portable machine for heavy materials like denim, upholstery fabrics, and heavy canvas
 +
*Very similar to the Sailrite LS-1 (refer to Sailrite instructional videos and manual)
 +
**Instructional videos: http://www.sailrite.com/Cap-Spring-Hook-Needle-Bar-Driver-Timing-for-Ultrafeed
  
The top speed of the machine can be adjusted using one of the knobs on a box under the table, next to the motor. It is the second knob down.  Right is faster, left is slower.  Feel free to adjust this -- use a scrap piece of fabric to determine a good top speed for your skill level and project needs.
+
=== Manuals for Thompson PW-500 ===
 +
*Hard copy only (located on bookshelf in grey binder)
 +
**Can also refer to Sailrite manual: https://saic.instructure.com/courses/1344494/files/52934323/download
  
 +
== Five-thread Overlock Serger (Juki MO-2416) ==
  
Full manual: [[Media:Juki-ddl-5550-6.pdf]]
+
*Pulling fabric out of the machine may cause thread breaks. It is best to feed thread with the pedal when removing your workpiece.
 +
*DO NOT UNTHREAD THE SERGER. It takes about 30 minutes and a lot of patience to thread this machine.
  
[[Juki Maintenance Notes]] - Replacing the counter knife, needle bar, thread guides, etc.
+
=== Overview ===
 +
*The threads lock around the seam to prevent fraying for '''lightweight fabrics only''' (used for clothing, especially stretch fabrics)
 +
*This machine does three kinds of stitches: a three-thread overlock, a chainstitch/overlock combination, or a four-thread overlock.  Normally it is set up to do the three-thread overlock, which only requires one needle, and doesn't use the rear thread trace or the second upper thread trace.
  
 +
*This machine has a knife placed to cut the fabric as you sew, and it *is possible* to cut your finger badly on this knife if you are not careful. BE CAREFUL. This machine also can go extremely, sometimes startlingly, fast.
  
Recommended reading:
+
=== Manual for Juki MO-2416 ===
  
[http://www.threadsmagazine.com/item/3751/machine-needle-know-how About sewing machine needles]
+
* PDF - [[Media:JukiMO240424142416.pdf]]
  
[http://www.threadsmagazine.com/item/6847/perfect-machine-tension-every-time Understanding thread tension]
 
  
[http://leatherworker.net/forum/index.php?showtopic=25126&st=0 Sew heavy material]
+
== 130-Stitch Computerized Sewing and Quilting (Brother XR1355) ==
  
[http://www.wipo.int/pctdb/en/wo.jsp?WO=2002000984&IA=US2001041173&DISPLAY=STATUS What is a thread wiper?]
+
*This machine is stored away in one of the sewing area cubbies.
  
== The industrial Juki serger ==
+
=== Overview ===
 +
*This machine does 130 different stitches including lots of cool decorative flowers and patterns. It is also the only machine that can do a zig-zag stitch.
 +
*'''Light fabrics only!'''
  
=== Overview of the Juki Serger ===
 
This machine does three kinds of stitches: a three-thread overlock, a chainstitch/overlock combination, or a four-thread overlock.  Normally it is set up to do the three-thread overlock, which only requires one needle, and doesn't use the rear thread trace or the second upper thread trace. 
 
  
 +
=== Manual for Brother XR1355 ===
  
This machine has a knife placed to cut the fabric as you sew, and it *is possible* to cut your finger badly on this knife if you are not careful.  The location of the knife is pointed out in bright orange nail polish on the machine.  BE CAREFUL.  This machine also can go extremely, sometimes startlingly, fast.
+
* PDF - http://download.brother.com/welcome/doch001142/xr1355ug02en.pdf
 +
*Spanish copy located on bookshelf in grey binder.
  
==== Manual for the Juki Serger ====
+
[[Category:Pages with a Noisebridge Tiny URL]]
  
* Full manua (pdf) for the Juki Sergerl: [[Media:JukiMO240424142416.pdf]]
+
== Grand Reopening Poster ==
  
=== Thread Tension on the Juki Serger ===
+
[[File:Sewing-Area-Poster.jpg|none|300px]]
* Thread tension is controlled by the knobs on the right front of the machine.  Mostly they're adjusted properly, and for most uses of serging the tension is not critical.  If the serged stitching is really wonky, though, try messing with the tension dials - be sure the thread is caught properly between the tension plates, as it occasionally gets into the springs instead.
+
 
+
* DO NOT UNTHREAD THE SERGER.  If you want different colored thread, simply cut off the current threads near the cone spools, and tie on a new thread.  Then either pull the threads through from the needle area (this can be difficult as they are somewhat knotted and you'll have to pull one out through the guts of the machine), or serge for a few inches on some scrap until the new color is pulled through.  You may or may not find that the knot catches on the hole in the needle.  If it does, just cut it, rethread the needle, pull 6 or 8 inches of thread through, and keep serging for a bit.
+
 
+
* If a thread breaks and forms a tangle, or breaks somewhere in the middle of the threading, you can find a map of how to rethread it on the inside of a little door that opens up just to the right of the knife.  It opens downwards and lets you get at the levers and such of the thread traces.  Each thread trace is drawn in a different color, however note that the tension dials are of mismatched colors, so follow the guide not the tension dial coloring.
+
 
+
* If you have to replace the needle, the notch in the needle faces backwards and it threads front to back.
+
 
+
== The portable Necchi ==
+
This was the only one of our functional sewing machines that can make buttonholes. Unfortunately, it is not working properly at this time.
+
[http://www.instructables.com/id/Noisebridge-Sewing-Machine/ Instructions for the smaller Necchi sewing machine.]
+
 
+
[[Category:Pages with a Noisebridge Tiny URL]]
+

Latest revision as of 21:09, 2 May 2016

Contents

[edit] Latest News

Sewing.jpg
*For the latest announcements, please subscribe to the email list here: https://www.noisebridge.net/mailman/listinfo/sewing/

The sewing area has been remodeled! Some machines have been added and others have been repaired. Also, there is a new Sewing and Crafting event. Come join us on the 1st and 3rd Tuesdays of every month from 6:30pm to 8:30pm

[edit] Overview

We have three mostly functional sewing machines:

  • Straight Stitch Drop Feed (Juki DDL 5550-6)
  • Five-thread Overlock Serger (Juki MO-2416)
  • 130-Stitch Computerized Sewing and Quilting (Brother XR1355)

[edit] Tips

  • Please DO NOT unthread the sewing machines unless you must. (e.g. to remove a spool of thread, simply cut it close to the spool so that the next person can simply tie a knot with the next thread and pull it all the way through to the needle)
  • Needles, bobbins, and other parts are located in labeled drawers underneath the pegboard (PLEASE KEEP IT ORGANIZED).
    • The closest place to get parts is at Apparel City, on Howard between 11th & 12th.
    • Needles may differ between machines and come in sizes (10, 12, 14, 16, etc.). The higher numbers are heavier gauge needles suitable for thicker fabrics. Leather needles have a tiny blade at the tip. Don't use a leather needle for other fabrics, though, it will cut the threads rather than squeezing between them, leaving holes that may start rips.
    • Needles for the straight stitch machines must be inserted with the scarf facing right. Please check the respective manuals.
  • If you've never operated a sewing machine before, ask some people at Noisebridge (Kyle or Ely). Sewing machines are not self-explanatory and this page does assume a certain amount of prior general knowledge.
    • Read the manual and do some research online.
    • Printed manuals for the two Juki Machines and the Thompson are located in a grey binder on the bookshelf
  • Use scraps for testing to determine thread tension and sewing speed.
  • Recommended reading:

About sewing machine needles

Understanding thread tension

Sew heavy material

What is a thread wiper?

[edit] Winding a Bobbin

  • Juki DDL-5550-6 & Artisan 618-1SC
    • To wind a bobbin, place the empty bobbin on the horizontal spindle to the right of the machine body (near the hand wheel). Run a second thread through the upper holder, down to the tensioner at the back of the right side of the machine, in line with the spindle. Thread the end through one of the holes in the bobbin side, from the inside to the outside. Press the lever to push the spindle down in contact with the sewing machine belt. While holding the thread end so it doesn't just whip out of the bobbin, press the pedal to run a couple of inches (if there were fabric in the machine). Soon enough you can let go of the thread end as it will have been caught by windings on top of it. If you are doing a lot of sewing, you can start a new bobbin before the current one is empty, and let it wind up as you sew. When the bobbin is full, the lever will automatically snap out away from the belt and stop winding thread.
  • Thompson PW-500 may not wind evenly tensioned bobbins automatically. It may be better to wind the bobbins on a different machine.

[edit] Repairing a Sewing Machine

  • If a sewing machine is actually broken and non functional, as opposed to just you can't figure out how to make it work, please call Billy from Apparel City at 415-816-8645 (mobile) and schedule an appointment for him to come fix it.
    • He usually charges around $80 per hour, plus parts.
    • Email the list and people will chip in to cover this. If you can't manage this process, email the sewing list and find someone else who can. Also, please put a note on the machine so people know what is going on with it.

[edit] Sewing Machines

[edit] Straight Stitch Drop Feed (Juki DDL 5550-6)

  • DO NOT use the thread cut function (DO NOT depress the back part of the pedal)
    • The machine is missing a thread wiper and needle guide for thread cutting.
    • Juki Maintenance Notes - Replacing the counter knife, needle bar, thread guides, etc.

[edit] Overview

  • General fabrics, light-weight materials and medium weight materials.
    • Not for leather or book binding. Please use the right tool for the job.
  • Electronic Motor
    • The top speed of the machine can be adjusted using one of the knobs on a box under the table, next to the motor. It is the second knob down. Right is faster, left is slower.

[edit] Manual for Juki DDL-5550

PDF - https://noisebridge.net/wiki/File:Juki-ddl-5550-6.pdf

[edit] Overview

[edit] Manuals for Thompson PW-500

[edit] Five-thread Overlock Serger (Juki MO-2416)

  • Pulling fabric out of the machine may cause thread breaks. It is best to feed thread with the pedal when removing your workpiece.
  • DO NOT UNTHREAD THE SERGER. It takes about 30 minutes and a lot of patience to thread this machine.

[edit] Overview

  • The threads lock around the seam to prevent fraying for lightweight fabrics only (used for clothing, especially stretch fabrics)
  • This machine does three kinds of stitches: a three-thread overlock, a chainstitch/overlock combination, or a four-thread overlock. Normally it is set up to do the three-thread overlock, which only requires one needle, and doesn't use the rear thread trace or the second upper thread trace.
  • This machine has a knife placed to cut the fabric as you sew, and it *is possible* to cut your finger badly on this knife if you are not careful. BE CAREFUL. This machine also can go extremely, sometimes startlingly, fast.

[edit] Manual for Juki MO-2416


[edit] 130-Stitch Computerized Sewing and Quilting (Brother XR1355)

  • This machine is stored away in one of the sewing area cubbies.

[edit] Overview

  • This machine does 130 different stitches including lots of cool decorative flowers and patterns. It is also the only machine that can do a zig-zag stitch.
  • Light fabrics only!


[edit] Manual for Brother XR1355

[edit] Grand Reopening Poster

Sewing-Area-Poster.jpg
Personal tools